comparison vc9.c @ 2482:5d28ea40fd98 libavcodec

Documentation patch by anonymous

2481:0803adcb3ec3

                   codes, codes_wrap, codes_size, use_static)          \
  init_vlc(vlc, nb_bits, nb_codes, bits, bits_wrap, bits_size,         \
           codes, codes_wrap, codes_size, use_static)
#endif

#define PROFILE_SIMPLE   0
#define PROFILE_MAIN     1
#define PROFILE_ADVANCED 3

#define QUANT_FRAME_IMPLICIT   0
#define QUANT_FRAME_EXPLICIT   1
#define QUANT_NON_UNIFORM      2
#define QUANT_UNIFORM          3

/* Where quant can be changed */
#define DQPROFILE_FOUR_EDGES   0
#define DQPROFILE_DOUBLE_EDGES 1
#define DQPROFILE_SINGLE_EDGE  2
#define DQPROFILE_ALL_MBS      3

/* Which edge is quantized with ALTPQUANT */
#define DQSINGLE_BEDGE_LEFT   0
#define DQSINGLE_BEDGE_TOP    1
#define DQSINGLE_BEDGE_RIGHT  2
#define DQSINGLE_BEDGE_BOTTOM 3

/* Which pair of edges is quantized with ALTPQUANT */
#define DQDOUBLE_BEDGE_TOPLEFT     0
#define DQDOUBLE_BEDGE_TOPRIGHT    1
#define DQDOUBLE_BEDGE_BOTTOMRIGHT 2
#define DQDOUBLE_BEDGE_BOTTOMLEFT  3

/* MV P modes */
#define MV_PMODE_1MV_HPEL_BILIN   0
#define MV_PMODE_1MV              1
#define MV_PMODE_1MV_HPEL         2
#define MV_PMODE_MIXED_MV         3
#define MV_PMODE_INTENSITY_COMP   4

#define BMV_TYPE_BACKWARD          0
#define BMV_TYPE_FORWARD           1
#define BMV_TYPE_INTERPOLATED      3

/* MV P mode - the 5th element is only used for mode 1 */
static const uint8_t mv_pmode_table[2][5] = {
  { MV_PMODE_1MV_HPEL_BILIN, MV_PMODE_1MV, MV_PMODE_1MV_HPEL, MV_PMODE_MIXED_MV, MV_PMODE_INTENSITY_COMP },
  { MV_PMODE_1MV, MV_PMODE_MIXED_MV, MV_PMODE_1MV_HPEL, MV_PMODE_1MV_HPEL_BILIN, MV_PMODE_INTENSITY_COMP }
};

/* One more frame type */
#define BI_TYPE 7

/* FIXME Worse than ugly */
static const int fps_nr[5] = { 24, 25, 30, 50, 60 },
  fps_dr[2] = { 1000, 1001 };
static const uint8_t pquant_table[3][32] = {
  {  /* Implicit quantizer */
     0,  1,  2,  3,  4,  5,  6,  7,  8,  6,  7,  8,  9, 10, 11, 12,

     0,  1,  1,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13,
    14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 29, 31
  }
};

// FIXME move this into the context
#define VC9_BFRACTION_VLC_BITS 7
static VLC vc9_bfraction_vlc;
#define VC9_IMODE_VLC_BITS 4
static VLC vc9_imode_vlc;
#define VC9_NORM2_VLC_BITS 3
static VLC vc9_norm2_vlc;
#if TILE_VLC_METHOD == 1
#define VC9_NORM6_VLC_BITS 9
static VLC vc9_norm6_vlc;
#endif
#if TILE_VLC_METHOD == 2
#define VC9_NORM6_FIRST_BITS 8
#define VC9_NORM6_SECOND_BITS 8
static VLC vc9_norm6_first, vc9_norm6_second;
#endif
/* Could be optimized, one table only needs 8 bits */
#define VC9_TTMB_VLC_BITS 9 //12
static VLC vc9_ttmb_vlc[3];
#define VC9_MV_DIFF_VLC_BITS 9 //15
static VLC vc9_mv_diff_vlc[4];
#define VC9_CBPCY_P_VLC_BITS 9 //14
static VLC vc9_cbpcy_p_vlc[4];
#define VC9_4MV_BLOCK_PATTERN_VLC_BITS 6
static VLC vc9_4mv_block_pattern_vlc[4];

//We mainly need data and is_raw, so this struct could be avoided
//to save a level of indirection; feel free to modify
typedef struct BitPlane {
    uint8_t *data;
    int width, stride;
    int height;
    uint8_t is_raw;
} BitPlane;

typedef struct VC9Context{
  /* No MpegEnc context, might be good to use it */
  MpegEncContext s;

  /***************************/
  /* Sequence Header         */
  /***************************/
  /* Simple/Main Profile */
  int res_sm; //reserved, 2b
  int res_x8; //reserved
  int multires; //frame-level RESPIC syntax element present
  int res_fasttx; //always 1
  int res_transtab; //always 0
  int rangered; //RANGEREDFRM (range reduction) syntax element present
  int res_rtm_flag; //reserved, set to 1
  int reserved; //duh

#if HAS_ADVANCED_PROFILE
  /* Advanced Profile */
  int level; //3
  int chromaformat; //2
  int postprocflag; //frame-based processing use
  int broadcast; //TFF/RFF present
    int interlace; //Progressive/interlaced (RPTFTM syntax element)
  int tfcntrflag; //TFCNTR present
  int panscanflag; //NUMPANSCANWIN, TOPLEFT{X,Y}, BOTRIGHT{X,Y} presents
    int extended_dmv;
  int color_prim; //8
  int transfer_char; //8
  int matrix_coef; //8
  int hrd_param_flag;
#endif

  /* All Profiles */
  /* TODO: move all int to flags */
  int profile; //2
  int frmrtq_postproc; //3
  int bitrtq_postproc; //5
    int loopfilter;
    int fastuvmc; //Rounding of qpel vector to hpel ? (not in Simple)
  int extended_mv; //Ext MV in P/B (not in Simple)
  int dquant; //How qscale varies with MBs, 2bits (not in Simple)
  int vstransform; //variable-size transform46
  

  int overlap; //overlapped transforms in use
  int quantizer_mode; //2, quantizer mode used for sequence, see QUANT_*
  int finterpflag; //INTERPFRM present


  /*****************************/
  /* Frame decoding            */
  /*****************************/
  /* All profiles */
  uint8_t mv_mode, mv_mode2; /* MV coding mode */
  uint8_t pq, altpq; /* Quantizers */
  uint8_t dquantfrm, dqprofile, dqsbedge, dqbilevel; /* pquant parameters */
  int tile; /* 3x2 if (width_mb%3) else 2x3 */
  int ac_table_level;
  VLC *luma_dc_vlc, *chroma_dc_vlc; /* transac/dcfrm bits are indexes */
  uint8_t ttmbf, ttfrm; /* Transform type */
  uint8_t lumscale, lumshift; /* Luma compensation parameters */
  int16_t bfraction; /* Relative position % anchors=> how to scale MVs */
  uint8_t halfpq; /* Uniform quant over image and qp+.5 */
  uint8_t respic;
  int buffer_fullness; /* For HRD ? */
  /* Ranges:
   * 0 -> [-64n 63.f] x [-32, 31.f]
   * 1 -> [-128, 127.f] x [-64, 63.f]
   * 2 -> [-512, 511.f] x [-128, 127.f]
   * 3 -> [-1024, 1023.f] x [-256, 255.f]
   */
  uint8_t mvrange;
  uint8_t pquantizer;
  uint8_t *previous_line_cbpcy; /* To use for predicted CBPCY */
  VLC *cbpcy_vlc /* Current CBPCY VLC table */,
    *ttmb_vlc /* Current MB Transform Type VLC table */;
  BitPlane mv_type_mb_plane; /* bitplane for mv_type == (4MV) */
  BitPlane skip_mb_plane, /* bitplane for skipped MBs */
    direct_mb_plane; /* bitplane for "direct" MBs */

  /* S/M only ? */
  uint8_t rangeredfrm; /* out_sample = CLIP((in_sample-128)*2+128) */
  uint8_t interpfrm;

#if HAS_ADVANCED_PROFILE
  /* Advanced */
  uint8_t fcm; //0->Progressive, 2->Frame-Interlace, 3->Field-Interlace
  uint8_t numpanscanwin;
  uint8_t tfcntr;
  uint8_t rptfrm, tff, rff;
  uint8_t topleftx;
  uint8_t toplefty;
  uint8_t bottomrightx;
  uint8_t bottomrighty;
  uint8_t uvsamp;
  uint8_t postproc;
  int hrd_num_leaky_buckets;
  uint8_t bit_rate_exponent;
  uint8_t buffer_size_exponent;
  BitPlane ac_pred_plane; //AC prediction flags bitplane
  BitPlane over_flags_plane; //Overflags bitplane
  uint8_t condover;
  uint16_t *hrd_rate, *hrd_buffer;
  VLC *luma_ac2_vlc, *chroma_ac2_vlc;
#endif
} VC9Context;

/* FIXME Slow and ugly */
static int get_prefix(GetBitContext *gb, int stop, int len)
{
#if 1
  int i = 0, tmp = !stop;

  CLOSE_READER(re, gb);
  return limit;
#endif
}

static int vc9_init_common(VC9Context *v)
{
    static int done = 0;
    int i;

    /* Set the bit planes */
    /* FIXME memset better ? (16bytes) */
    v->mv_type_mb_plane = (struct BitPlane) { NULL, 0, 0, 0 };
    v->direct_mb_plane = (struct BitPlane) { NULL, 0, 0, 0 };
    v->skip_mb_plane = (struct BitPlane) { NULL, 0, 0, 0 };
#if HAS_ADVANCED_PROFILE
    v->ac_pred_plane = v->over_flags_plane = (struct BitPlane) { NULL, 0, 0, 0 };
    v->hrd_rate = v->hrd_buffer = NULL;
#endif

    /* VLC tables */
#if TILE_VLC_METHOD == 1
#  if 0 // spec -> actual tables converter
    for(i=0; i<64; i++){
        int code= (vc9_norm6_spec[i][1] << vc9_norm6_spec[i][4]) + vc9_norm6_spec[i][3];
        av_log(NULL, AV_LOG_DEBUG, "0x%03X, ", code);
        if(i%16==15) av_log(NULL, AV_LOG_DEBUG, "\n");

                 vc9_bfraction_bits, 1, 1,
                 vc9_bfraction_codes, 1, 1, 1);
        INIT_VLC(&vc9_norm2_vlc, VC9_NORM2_VLC_BITS, 4,
                 vc9_norm2_bits, 1, 1,
                 vc9_norm2_codes, 1, 1, 1);
#if TILE_VLC_METHOD == 1
        INIT_VLC(&vc9_norm6_vlc, VC9_NORM6_VLC_BITS, 64,
                 vc9_norm6_bits, 1, 1,
                 vc9_norm6_codes, 2, 2, 1);
#endif
#if TILE_VLC_METHOD == 2
        INIT_VLC(&vc9_norm6_first, VC9_NORM6_FIRST_BITS, 64,
                 &vc9_norm6_first[0][1], 1, 1,
                 &vc9_norm6_first[0][0], 1, 1, 1);
        INIT_VLC(&vc9_norm6_second, VC9_NORM6_SECOND_BITS, 64,
                 vc9_norm6_second[0][1], 1, 1,
                 vc9_norm6_second[0][1], 1, 1, 1);
#endif
        INIT_VLC(&vc9_imode_vlc, VC9_IMODE_VLC_BITS, 7,
                 vc9_imode_bits, 1, 1,
                 vc9_imode_codes, 1, 1, 1);
        for (i=0; i<3; i++)

    return 0;
}

#if HAS_ADVANCED_PROFILE
/* 6.2.1, p32 */
static int decode_hrd(VC9Context *v, GetBitContext *gb)
{
    int i, num;

    num = get_bits(gb, 5);

        }
    }
    return 0;
}

/* Table 2, p18 */
static int decode_advanced_sequence_header(AVCodecContext *avctx, GetBitContext *gb)
{
    VC9Context *v = avctx->priv_data;
    int nr, dr, aspect_ratio;

    av_log(avctx, AV_LOG_DEBUG, "Advanced profile not supported yet\n");
    return -1;
}
#endif

/* Figure 7-8, p16-17 */
static int decode_sequence_header(AVCodecContext *avctx, GetBitContext *gb)
{
    VC9Context *v = avctx->priv_data;

    v->profile = get_bits(gb, 2);

               "Profile %i:\nfrmrtq_postproc=%i, bitrtq_postproc=%i\n"
               "LoopFilter=%i, MultiRes=%i, FastUVMV=%i, Extended MV=%i\n"
               "Rangered=%i, VSTransform=%i, Overlap=%i, SyncMarker=%i\n"
               "DQuant=%i, Quantizer mode=%i, Max B frames=%i\n",
               v->profile, v->frmrtq_postproc, v->bitrtq_postproc,
               v->loopfilter, v->multires, v->fastuvmc, v->extended_mv,
               v->rangered, v->vstransform, v->overlap, v->s.resync_marker,
               v->dquant, v->quantizer_mode, avctx->max_b_frames
               );
        return 0;
#endif

#endif
}


#if HAS_ADVANCED_PROFILE
/*****************************************************************************/
/* Entry point decoding (Advanced Profile)                                   */
/*****************************************************************************/
static int advanced_entry_point_process(AVCodecContext *avctx, GetBitContext *gb)
{
    VC9Context *v = avctx->priv_data;
    int range_mapy_flag, range_mapuv_flag, i;
    if (v->profile != PROFILE_ADVANCED)

    }
    return 0;
}
#endif

/******************************************************************************/
/* Bitplane decoding: 8.7, p56                                                */
/******************************************************************************/
#define IMODE_RAW     0
#define IMODE_NORM2   1
#define IMODE_DIFF2   2
#define IMODE_NORM6   3
#define IMODE_DIFF6   4
#define IMODE_ROWSKIP 5
#define IMODE_COLSKIP 6
int alloc_bitplane(BitPlane *bp, int width, int height)
{
    if (!bp || bp->width<0 || bp->height<0) return -1;
    bp->data = (uint8_t*)av_malloc(width*height);
    if (!bp->data) return -1;
    bp->width = bp->stride = width; //FIXME Needed for aligned data ?
    bp->height = height;
    return 0;
}

void free_bitplane(BitPlane *bp)
{
    bp->width = bp->stride = bp->height = 0;
    if (bp->data) av_freep(&bp->data);
}

static void decode_rowskip(uint8_t* plane, int width, int height, int stride, VC9Context *v){
    int x, y;
    GetBitContext *gb = &v->s.gb;

    for (y=0; y<height; y++){

                plane[x] = get_bits(gb, 1);
        plane += stride;
    }
}

//FIXME optimize
static void decode_colskip(uint8_t* plane, int width, int height, int stride, VC9Context *v){
    int x, y;
    GetBitContext *gb = &v->s.gb;

    for (x=0; x<width; x++){

                plane[y*stride] = get_bits(gb, 1);
        plane ++;
    }
}

//FIXME optimize
//FIXME Use BitPlane struct or return if table is raw (no bits read here but
//      later on)
//Elements must be either 0 or 1
static int bitplane_decoding(BitPlane *bp, VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;

    int imode, x, y, code, use_vertical_tile, tile_w, tile_h;

        tile_w= use_vertical_tile ? 2 : 3;
        tile_h= use_vertical_tile ? 3 : 2;

        for(y=  bp->height%tile_h; y< bp->height; y+=tile_h){
            for(x=  bp->width%tile_w; x< bp->width; x+=tile_w){
#if TILE_VLC_METHOD == 1 //FIXME Too much optimized ?
                code = get_vlc2(gb, vc9_norm6_vlc.table, VC9_NORM6_VLC_BITS, 2);
                if(code<0){
                    av_log(v->s.avctx, AV_LOG_DEBUG, "inavlid NORM-6 VLC\n");
                    return -1;
                }
#endif
#if TILE_VLC_METHOD == 2 //TODO Optimize VLC decoding
                code = get_vlc2(gb, vc9_norm6_first.table, VC9_NORM6_FIRST_BITS, 2);
                if (vc9_norm6_mode[code] == 1)
                {
#  if TRACE
                    code = get_bits(gb, 5);
                    assert(code>-1 && code<20);
                    code = vc9_norm6_flc_val[code];
#  else
                    code = vc9_norm6_flc_val[get_bits(gb, 5)];
#  endif
                }
                else if (vc9_norm6_mode[code] == 2)
                {
#  if TRACE
                    code = get_vlc2(gb, vc9_norm6_second.table, VC9_NORM6_SECOND_BITS, 2);
                    assert(code>-1 && code<22);
                    code = vc9_norm6_second_val[code];
#  else
                    code = vc9_norm6_second_val[get_vlc2(gb, vc9_norm6_second.table, VC9_NORM6_SECOND_BITS, 2)];
#  endif
#endif //TILE_VLC_METHOD == 2
                //FIXME following is a pure guess and probably wrong
                //FIXME A bitplane (0 | !0), so could the shifts be avoided ?
                planep[x     + 0*bp->stride]= (code>>0)&1;
                planep[x + 1 + 0*bp->stride]= (code>>1)&1;
                //FIXME Does branch prediction help here?

        planep = bp->data;
        for (x=0; x<bp->width*bp->height; x++) planep[x] = !planep[x]; //FIXME stride
    }
    return (imode<<1) + invert;
}

/*****************************************************************************/
/* VOP Dquant decoding                                                       */
/*****************************************************************************/
static int vop_dquant_decoding(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int pqdiff;

        }
    }
    return 0;
}

/*****************************************************************************/
/* All Profiles picture header decoding specific functions                   */
/* Only pro/epilog differs between Simple/Main and Advanced => check caller  */
/*****************************************************************************/

/* Tables 11+12, p62-65 */
static int decode_b_picture_primary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int pqindex, status;

    }

    return 0;
}

static int decode_b_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status;

    }
    /* Epilog (AC/DC syntax) should be done in caller */
    return 0;
}

/* Tables 5+7, p53-54 and 55-57 */
static int decode_i_picture_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int pqindex, status = 0;

    /* Epilog (AC/DC syntax) should be done in caller */
    return status;
}

/* Table 9, p58-60 */
static int decode_p_picture_primary_header(VC9Context *v)
{
    /* INTERFRM, FRMCNT, RANGEREDFRM read in caller */
    GetBitContext *gb = &v->s.gb;
    int lowquant, pqindex, status = 0;

        v->lumshift = get_bits(gb, 6);
    }
    return 0;
}

static int decode_p_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status = 0;
    if ((v->mv_mode == MV_PMODE_INTENSITY_COMP &&

        }
    }
    /* Epilog (AC/DC syntax) should be done in caller */
    return 0;
}


static int standard_decode_picture_primary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status = 0;

      return status;
    }
    return 0;
}

static int standard_decode_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status = 0, index;

    /* AC Syntax */
    v->ac_table_level = decode012(gb);
    if (v->s.pict_type == I_TYPE || v->s.pict_type == BI_TYPE)
    {
        index = decode012(gb);
        v->luma_ac2_vlc = NULL + index; //FIXME Add AC2 table
        v->chroma_ac2_vlc = NULL + index;
    }
    /* DC Syntax */
    index = decode012(gb);
    v->luma_dc_vlc = &ff_msmp4_dc_luma_vlc[index];
    v->chroma_dc_vlc = &ff_msmp4_dc_chroma_vlc[index];
   
    return 0;
}


#if HAS_ADVANCED_PROFILE
/******************************************************************************/
/* Advanced Profile picture header decoding specific functions                */
/******************************************************************************/
static int advanced_decode_picture_primary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    static const int type_table[4] = { P_TYPE, B_TYPE, I_TYPE, BI_TYPE };
    int type, i;

    default: break;
    }
    return 0;
}

static int advanced_decode_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int index;

    /* AC Syntax */
    v->ac_table_level = decode012(gb);
    if (v->s.pict_type == I_TYPE || v->s.pict_type == BI_TYPE)
    {
        index = decode012(gb); //FIXME
        v->luma_ac2_vlc = NULL + index;
        v->chroma_ac2_vlc = NULL + index;
    }
    /* DC Syntax */
    index = decode012(gb);
    v->luma_dc_vlc = &ff_msmp4_dc_luma_vlc[index];
    v->chroma_dc_vlc = &ff_msmp4_dc_chroma_vlc[index];

    return 0;
}
#endif

/******************************************************************************/
/* Block decoding functions                                                   */
/******************************************************************************/
/* 7.1.4, p91 and 8.1.1.7, p(1)04 */
/* FIXME proper integration (unusable and lots of parameters to send */
int decode_luma_intra_block(VC9Context *v, int mquant)
{
    GetBitContext *gb = &v->s.gb;
    int dcdiff;

    }
    /* FIXME: 8.1.1.15, p(1)13, coeff scaling for Adv Profile */

    return 0;
}

/******************************************************************************/
/* MacroBlock decoding functions                                              */
/******************************************************************************/
/* 8.1.1.5, p(1)02-(1)03 */
/* We only need to store 3 flags, but math with 4 is easier */
#define GET_CBPCY(table, bits)                                      \
    predicted_cbpcy = get_vlc2(gb, table, bits, 2);             \
    cbpcy[0] = (p_cbpcy[-1] == p_cbpcy[2])                          \
         ? previous_cbpcy[1] : p_cbpcy[+2];                         \
    cbpcy[0] ^= ((predicted_cbpcy>>5)&0x01);                        \

         ? previous_cbpcy[3] : cbpcy[0];                            \
    cbpcy[2] ^= ((predicted_cbpcy>>3)&0x01);                        \
    cbpcy[3] = (cbpcy[1] == cbpcy[0]) ? cbpcy[2] : cbpcy[1];        \
    cbpcy[3] ^= ((predicted_cbpcy>>2)&0x01);
     
/* 8.1, p100 */
static int standard_decode_i_mbs(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    MpegEncContext *s = &v->s;
    int current_mb = 0; /* MB/Block Position info */
    /* FIXME: better to use a pointer than using (x<<4) */
    uint8_t cbpcy[4], previous_cbpcy[4], predicted_cbpcy,
        *p_cbpcy /* Pointer to skip some math */;

    /* Reset CBPCY predictors */
    memset(v->previous_line_cbpcy, 0, s->mb_stride<<2);

        }
    }
    return 0;
}

#define GET_MQUANT()                                           \
  if (v->dquantfrm)                                            \
  {                                                            \
    if (v->dqprofile == DQPROFILE_ALL_MBS)                     \
    {                                                          \

        else mquant = get_bits(gb, 5);                         \
      }                                                        \
    }                                                          \
  }

/* MVDATA decoding from 8.3.5.2, p(1)20 */
#define GET_MVDATA(_dmv_x, _dmv_y)                                  \
  index = 1 + get_vlc2(gb, vc9_mv_diff_vlc[s->mv_table_index].table,\
                       VC9_MV_DIFF_VLC_BITS, 2);                    \
  if (index > 36)                                                   \
  {                                                                 \

    val = get_bits(gb, size_table[index1] - val);               \
    sign = 0 - (val&1);                                             \
    _dmv_y = (sign ^ ((val>>1) + offset_table[index1])) - sign;     \
  }

/* 8.1, p(1)15 */
static int decode_p_mbs(VC9Context *v)
{
    MpegEncContext *s = &v->s;
    GetBitContext *gb = &v->s.gb;
    int current_mb = 0, i; /* MB/Block Position info */

        }
    }
    return 0;
}

static int decode_b_mbs(VC9Context *v)
{
    MpegEncContext *s = &v->s;
    GetBitContext *gb = &v->s.gb;
    int current_mb = 0, i /* MB / B postion information */;

                    if (v->bfraction > 420 /*1/2*/ &&
                        b_mv_type < 3) b_mv_type = 1-b_mv_type;
                }
                else
                { 
                    /* FIXME getting tired commenting */
                    GET_MVDATA(dmv1_x, dmv1_y);
                    if (!s->mb_intra /* b_mv1 tells not intra */)
                    {
                        /* FIXME: actually read it */
                        b_mv_type = decode012(gb);
                        if (v->bfraction > 420 /*1/2*/ &&
                            b_mv_type < 3) b_mv_type = 1-b_mv_type;
                    }
                }

            current_mb++;
        }
    }
    return 0;
}

#if HAS_ADVANCED_PROFILE
static int advanced_decode_i_mbs(VC9Context *v)
{
    MpegEncContext *s = &v->s;
    GetBitContext *gb = &v->s.gb;
    int mqdiff, mquant, current_mb = 0, over_flags_mb = 0;

        }
        current_mb++;
    }
    return 0;
}
#endif

static int vc9_decode_init(AVCodecContext *avctx)
{
    VC9Context *v = avctx->priv_data;
    MpegEncContext *s = &v->s;
    GetBitContext gb;

#endif

    return 0;
    }

static int vc9_decode_frame(AVCodecContext *avctx,
                            void *data, int *data_size,
                            uint8_t *buf, int buf_size)
{
    VC9Context *v = avctx->priv_data;

    /* Fake consumption of all data */
    *data_size = len;
    return buf_size; //Number of bytes consumed
}

static int vc9_decode_end(AVCodecContext *avctx)
{
    VC9Context *v = avctx->priv_data;

#if HAS_ADVANCED_PROFILE

2482:5d28ea40fd98

                   codes, codes_wrap, codes_size, use_static)          \
  init_vlc(vlc, nb_bits, nb_codes, bits, bits_wrap, bits_size,         \
           codes, codes_wrap, codes_size, use_static)
#endif

/** Available Profiles */
//@{
#define PROFILE_SIMPLE   0
#define PROFILE_MAIN     1
#define PROFILE_ADVANCED 3
//@}

/** Sequence quantizer mode */
//@{
#define QUANT_FRAME_IMPLICIT   0
#define QUANT_FRAME_EXPLICIT   1
#define QUANT_NON_UNIFORM      2
#define QUANT_UNIFORM          3
//@}

/** Where quant can be changed */
//@{
#define DQPROFILE_FOUR_EDGES   0
#define DQPROFILE_DOUBLE_EDGES 1
#define DQPROFILE_SINGLE_EDGE  2
#define DQPROFILE_ALL_MBS      3
//@}

/** @name Where quant can be changed
 */
//@{
#define DQPROFILE_FOUR_EDGES   0
#define DQSINGLE_BEDGE_LEFT   0
#define DQSINGLE_BEDGE_TOP    1
#define DQSINGLE_BEDGE_RIGHT  2
#define DQSINGLE_BEDGE_BOTTOM 3
//@}

/** Which pair of edges is quantized with ALTPQUANT */
//@{
#define DQDOUBLE_BEDGE_TOPLEFT     0
#define DQDOUBLE_BEDGE_TOPRIGHT    1
#define DQDOUBLE_BEDGE_BOTTOMRIGHT 2
#define DQDOUBLE_BEDGE_BOTTOMLEFT  3
//@}

/** MV modes for P frames */
//@{
#define MV_PMODE_1MV_HPEL_BILIN   0
#define MV_PMODE_1MV              1
#define MV_PMODE_1MV_HPEL         2
#define MV_PMODE_MIXED_MV         3
#define MV_PMODE_INTENSITY_COMP   4
//@}

/** @name MV types for B frames */
//@{
#define BMV_TYPE_BACKWARD          0
#define BMV_TYPE_BACKWARD          0
#define BMV_TYPE_FORWARD           1
#define BMV_TYPE_INTERPOLATED      3
//@}

/** MV P mode - the 5th element is only used for mode 1 */
static const uint8_t mv_pmode_table[2][5] = {
  { MV_PMODE_1MV_HPEL_BILIN, MV_PMODE_1MV, MV_PMODE_1MV_HPEL, MV_PMODE_MIXED_MV, MV_PMODE_INTENSITY_COMP },
  { MV_PMODE_1MV, MV_PMODE_MIXED_MV, MV_PMODE_1MV_HPEL, MV_PMODE_1MV_HPEL_BILIN, MV_PMODE_INTENSITY_COMP }
};

/** One more frame type */
#define BI_TYPE 7

static const int fps_nr[5] = { 24, 25, 30, 50, 60 },
  fps_dr[2] = { 1000, 1001 };
static const uint8_t pquant_table[3][32] = {
  {  /* Implicit quantizer */
     0,  1,  2,  3,  4,  5,  6,  7,  8,  6,  7,  8,  9, 10, 11, 12,

     0,  1,  1,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13,
    14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 29, 31
  }
};

/** @name VC-9 VLC tables and defines
 *  @todo TODO move this into the context
 */
//@{
#define VC9_BFRACTION_VLC_BITS 7
static VLC vc9_bfraction_vlc;
#define VC9_IMODE_VLC_BITS 4
static VLC vc9_imode_vlc;
#define VC9_NORM2_VLC_BITS 3
static VLC vc9_norm2_vlc;
#if VLC_NORM6_METH0D == 1
#define VC9_NORM6_VLC_BITS 9
static VLC vc9_norm6_vlc;
#endif
#if VLC_NORM6_METH0D == 2
#define VC9_NORM6_FIRST_BITS 8
#define VC9_NORM6_SECOND_BITS 8
static VLC vc9_norm6_first_vlc, vc9_norm6_second_vlc;
#endif
/* Could be optimized, one table only needs 8 bits */
#define VC9_TTMB_VLC_BITS 9 //12
static VLC vc9_ttmb_vlc[3];
#define VC9_MV_DIFF_VLC_BITS 9 //15
static VLC vc9_mv_diff_vlc[4];
#define VC9_CBPCY_P_VLC_BITS 9 //14
static VLC vc9_cbpcy_p_vlc[4];
#define VC9_4MV_BLOCK_PATTERN_VLC_BITS 6
static VLC vc9_4mv_block_pattern_vlc[4];
//@}

/** Bitplane struct
 * We mainly need data and is_raw, so this struct could be avoided
 * to save a level of indirection; feel free to modify
 * @fixme For now, stride=width
 * @warning Data are bits, either 1 or 0
 */
typedef struct BitPlane {
    uint8_t *data;      ///< Data buffer
    int width;          ///< Width of the buffer
    int stride;         ///< Stride of the buffer
    int height;         ///< Plane height
    uint8_t is_raw;     ///< Bit values must be read at MB level
} BitPlane;

/** The VC9 Context */
typedef struct VC9Context{
    MpegEncContext s;

    /** Simple/Main Profile sequence header */
    //@{
    int res_sm;           ///< reserved, 2b
    int res_x8;           ///< reserved
    int multires;         ///< frame-level RESPIC syntax element present
    int res_fasttx;       ///< reserved, always 1
    int res_transtab;     ///< reserved, always 0
    int rangered;         ///< RANGEREDFRM (range reduction) syntax element present
                          ///< at frame level
    int res_rtm_flag;     ///< reserved, set to 1
    int reserved;         ///< reserved
    //@}

#if HAS_ADVANCED_PROFILE
    /** Advanced Profile */
    //@{
    int level;            ///< 3bits, for Advanced/Simple Profile, provided by TS layer
    int chromaformat;     ///< 2bits, 2=4:2:0, only defined
    int postprocflag;     ///< Per-frame processing suggestion flag present
    int broadcast;        ///< TFF/RFF present
    int interlace;        ///< Progressive/interlaced (RPTFTM syntax element)
    int tfcntrflag;       ///< TFCNTR present
    int panscanflag;      ///< NUMPANSCANWIN, TOPLEFT{X,Y}, BOTRIGHT{X,Y} present
    int extended_dmv;     ///< Additional extended dmv range at P/B frame-level
    int color_prim;       ///< 8bits, chroma coordinates of the color primaries
    int transfer_char;    ///< 8bits, Opto-electronic transfer characteristics
    int matrix_coef;      ///< 8bits, Color primaries->YCbCr transform matrix
    int hrd_param_flag;   ///< Presence of Hypothetical Reference
                          ///< Decoder parameters
    //@}
#endif


    /** Sequence header data for all Profiles
     * TODO: choose between ints, uint8_ts and monobit flags
     */
    //@{
    int profile;          ///< 2bits, Profile
    int frmrtq_postproc;  ///< 3bits, 
    int bitrtq_postproc;  ///< 5bits, quantized framerate-based postprocessing strength
    int fastuvmc;         ///< Rounding of qpel vector to hpel ? (not in Simple)
    int extended_mv;      ///< Ext MV in P/B (not in Simple)
    int dquant;           ///< How qscale varies with MBs, 2bits (not in Simple)
    int vstransform;      ///< variable-size [48]x[48] transform type + info
    int overlap;          ///< overlapped transforms in use
    int quantizer_mode;   ///< 2bits, quantizer mode used for sequence, see QUANT_*
    int finterpflag;      ///< INTERPFRM present
    //@}

    /** Frame decoding info for all profiles */
    //@{
    uint8_t mv_mode;      ///< MV coding monde
    uint8_t mv_mode2;     ///< Secondary MV coding mode (B frames)
    uint8_t pq, altpq;    ///< Current/alternate frame quantizer scale
    /** pquant parameters */
    //@{
    uint8_t dquantfrm;
    uint8_t dqprofile;
    uint8_t dqsbedge;
    uint8_t dqbilevel;
    //@}
    int ac_table_level;   ///< Index for AC tables from ACFRM element
    VLC *luma_dc_vlc;     ///< Pointer to current luma DC VLC table
    VLC *chroma_dc_vlc;   ///< Pointer to current luma AC VLC table
    int ttfrm;            ///< Transform type info present at frame level
    uint8_t ttmbf;        ///< Transform type
    /** Luma compensation parameters */
    //@{
    uint8_t lumscale;
    uint8_t lumshift;
    //@}
    int16_t bfraction;    ///< Relative position % anchors=> how to scale MVs
    uint8_t halfpq;       ///< Uniform quant over image and qp+.5
    uint8_t respic;       ///< Frame-level flag for resized images
    int buffer_fullness;  ///< HRD info
    /** Ranges:
     * -# 0 -> [-64n 63.f] x [-32, 31.f]
     * -# 1 -> [-128, 127.f] x [-64, 63.f]
     * -# 2 -> [-512, 511.f] x [-128, 127.f]
     * -# 3 -> [-1024, 1023.f] x [-256, 255.f]
     */
    uint8_t mvrange;
    uint8_t pquantizer;
    uint8_t *previous_line_cbpcy; ///< To use for predicted CBPCY
    VLC *cbpcy_vlc;               ///< Current CBPCY VLC table
    VLC *ttmb_vlc;                ///< Current MB Transform Type VLC table
    BitPlane mv_type_mb_plane;    ///< bitplane for mv_type == (4MV)
    BitPlane skip_mb_plane;       ///< bitplane for skipped MBs
    BitPlane direct_mb_plane;     ///< bitplane for "direct" MBs

    /** Frame decoding info for S/M profiles only */
    //@{
    uint8_t rangeredfrm; ///< out_sample = CLIP((in_sample-128)*2+128)
    uint8_t interpfrm;
    //@}

#if HAS_ADVANCED_PROFILE
    /** Frame decoding info for Advanced profile */
    //@{
    uint8_t fcm; ///< 0->Progressive, 2->Frame-Interlace, 3->Field-Interlace
    uint8_t numpanscanwin;
    uint8_t tfcntr;
    uint8_t rptfrm, tff, rff;
    uint8_t topleftx;
    uint8_t toplefty;
    uint8_t bottomrightx;
    uint8_t bottomrighty;
    uint8_t uvsamp;
    uint8_t postproc;
    int hrd_num_leaky_buckets;
    uint8_t bit_rate_exponent;
    uint8_t buffer_size_exponent;
    BitPlane ac_pred_plane;       ///< AC prediction flags bitplane
    BitPlane over_flags_plane;    ///< Overflags bitplane
    uint8_t condover;
    uint16_t *hrd_rate, *hrd_buffer;
    int ac2_table_level;          ///< Index for AC2 tables from AC2FRM element
    //@}
#endif
} VC9Context;

/**
 * Get unary code of limited length
 * @fixme FIXME Slow and ugly
 * @param gb GetBitContext
 * @param[in] stop The bitstop value (unary code of 1's or 0's)
 * @param[in] len Maximum length
 * @return Unary length/index
 */
static int get_prefix(GetBitContext *gb, int stop, int len)
{
#if 1
  int i = 0, tmp = !stop;

  CLOSE_READER(re, gb);
  return limit;
#endif
}

/**
 * Init VC-9 specific tables and VC9Context members
 * @param v The VC9Context to initialize
 * @return Status
 */
static int vc9_init_common(VC9Context *v)
{
    static int done = 0;
    int i;

    /* Set the bit planes */
    v->mv_type_mb_plane = (struct BitPlane) { NULL, 0, 0, 0 };
    v->direct_mb_plane = (struct BitPlane) { NULL, 0, 0, 0 };
    v->skip_mb_plane = (struct BitPlane) { NULL, 0, 0, 0 };
#if HAS_ADVANCED_PROFILE
    v->ac_pred_plane = v->over_flags_plane = (struct BitPlane) { NULL, 0, 0, 0 };
    v->hrd_rate = v->hrd_buffer = NULL;
#endif

    /* VLC tables */
#if VLC_NORM6_METH0D == 1
#  if 0 // spec -> actual tables converter
    for(i=0; i<64; i++){
        int code= (vc9_norm6_spec[i][1] << vc9_norm6_spec[i][4]) + vc9_norm6_spec[i][3];
        av_log(NULL, AV_LOG_DEBUG, "0x%03X, ", code);
        if(i%16==15) av_log(NULL, AV_LOG_DEBUG, "\n");

                 vc9_bfraction_bits, 1, 1,
                 vc9_bfraction_codes, 1, 1, 1);
        INIT_VLC(&vc9_norm2_vlc, VC9_NORM2_VLC_BITS, 4,
                 vc9_norm2_bits, 1, 1,
                 vc9_norm2_codes, 1, 1, 1);
#if VLC_NORM6_METH0D == 1
        INIT_VLC(&vc9_norm6_vlc, VC9_NORM6_VLC_BITS, 64,
                 vc9_norm6_bits, 1, 1,
                 vc9_norm6_codes, 2, 2, 1);
#endif
#if VLC_NORM6_METH0D == 2
        INIT_VLC(&vc9_norm6_first_vlc, VC9_NORM6_FIRST_BITS, 24,
                 &vc9_norm6_first[0][1], 1, 1,
                 &vc9_norm6_first[0][0], 1, 1, 1);
        INIT_VLC(&vc9_norm6_second_vlc, VC9_NORM6_SECOND_BITS, 22,
                 &vc9_norm6_second[0][1], 1, 1,
                 &vc9_norm6_second[0][0], 1, 1, 1);
#endif
        INIT_VLC(&vc9_imode_vlc, VC9_IMODE_VLC_BITS, 7,
                 vc9_imode_bits, 1, 1,
                 vc9_imode_codes, 1, 1, 1);
        for (i=0; i<3; i++)

    return 0;
}

#if HAS_ADVANCED_PROFILE
/**
 * Decode sequence header's Hypothetic Reference Decoder data
 * @see 6.2.1, p32
 * @param v The VC9Context to initialize
 * @param gb A GetBitContext initialized from AVCodecContext extra_data
 * @return Status
 */
static int decode_hrd(VC9Context *v, GetBitContext *gb)
{
    int i, num;

    num = get_bits(gb, 5);

        }
    }
    return 0;
}

/**
 * Decode sequence header for Advanced Profile
 * @see Table 2, p18
 * @see 6.1.7, pp21-27
 * @param v The VC9Context to initialize
 * @param gb A GetBitContext initialized from AVCodecContext extra_data
 * @return Status
 */
static int decode_advanced_sequence_header(AVCodecContext *avctx, GetBitContext *gb)
{
    VC9Context *v = avctx->priv_data;
    int nr, dr, aspect_ratio;

    av_log(avctx, AV_LOG_DEBUG, "Advanced profile not supported yet\n");
    return -1;
}
#endif

/** 
 * Decode Simple/Main Profiles sequence header
 * @see Figure 7-8, p16-17
 * @param avctx Codec context
 * @param gb GetBit context initialized from Codec context extra_data
 * @return Status
 */
static int decode_sequence_header(AVCodecContext *avctx, GetBitContext *gb)
{
    VC9Context *v = avctx->priv_data;

    v->profile = get_bits(gb, 2);

               "Profile %i:\nfrmrtq_postproc=%i, bitrtq_postproc=%i\n"
               "LoopFilter=%i, MultiRes=%i, FastUVMV=%i, Extended MV=%i\n"
               "Rangered=%i, VSTransform=%i, Overlap=%i, SyncMarker=%i\n"
               "DQuant=%i, Quantizer mode=%i, Max B frames=%i\n",
               v->profile, v->frmrtq_postproc, v->bitrtq_postproc,
               v->s.loop_filter, v->multires, v->fastuvmc, v->extended_mv,
               v->rangered, v->vstransform, v->overlap, v->s.resync_marker,
               v->dquant, v->quantizer_mode, avctx->max_b_frames
               );
        return 0;
#endif

#endif
}


#if HAS_ADVANCED_PROFILE
/** Entry point decoding (Advanced Profile)
 * @param avctx Codec context
 * @param gb GetBit context initialized from avctx->extra_data
 * @return Status
 */
static int advanced_entry_point_process(AVCodecContext *avctx, GetBitContext *gb)
{
    VC9Context *v = avctx->priv_data;
    int range_mapy_flag, range_mapuv_flag, i;
    if (v->profile != PROFILE_ADVANCED)

    }
    return 0;
}
#endif

/***********************************************************************/
/**
 * @defgroup bitplane VC9 Bitplane decoding
 * @see 8.7, p56
 * @{
 */

/** @addtogroup bitplane
 * Imode types
 * @{
 */
#define IMODE_RAW     0
#define IMODE_NORM2   1
#define IMODE_DIFF2   2
#define IMODE_NORM6   3
#define IMODE_DIFF6   4
#define IMODE_ROWSKIP 5
#define IMODE_COLSKIP 6
/** @} */ //imode defines

/** Allocate the buffer from a bitplane, given its dimensions
 * @param bp Bitplane which buffer is to allocate
 * @param[in] width Width of the buffer
 * @param[in] height Height of the buffer
 * @return Status
 * @todo TODO: Take into account stride
 * @todo TODO: Allow use of external buffers ?
 */
int alloc_bitplane(BitPlane *bp, int width, int height)
{
    if (!bp || bp->width<0 || bp->height<0) return -1;
    bp->data = (uint8_t*)av_malloc(width*height);
    if (!bp->data) return -1;
    bp->width = bp->stride = width; 
    bp->height = height;
    return 0;
}

/** Free the bitplane's buffer
 * @param bp Bitplane which buffer is to free
 */
void free_bitplane(BitPlane *bp)
{
    bp->width = bp->stride = bp->height = 0;
    if (bp->data) av_freep(&bp->data);
}

/** Decode rows by checking if they are skiped
 * @param plane Buffer to store decoded bits
 * @param[in] width Width of this buffer
 * @param[in] height Height of this buffer
 * @param[in] stride of this buffer
 */
static void decode_rowskip(uint8_t* plane, int width, int height, int stride, VC9Context *v){
    int x, y;
    GetBitContext *gb = &v->s.gb;

    for (y=0; y<height; y++){

                plane[x] = get_bits(gb, 1);
        plane += stride;
    }
}

/** Decode columns by checking if they are skiped
 * @param plane Buffer to store decoded bits
 * @param[in] width Width of this buffer
 * @param[in] height Height of this buffer
 * @param[in] stride of this buffer
 * @fixme FIXME: Optimize
 */
static void decode_colskip(uint8_t* plane, int width, int height, int stride, VC9Context *v){
    int x, y;
    GetBitContext *gb = &v->s.gb;

    for (x=0; x<width; x++){

                plane[y*stride] = get_bits(gb, 1);
        plane ++;
    }
}

/** Decode a bitplane's bits
 * @param bp Bitplane where to store the decode bits
 * @param v VC9 context for bit reading and logging
 * @return Status
 * @fixme FIXME: Optimize
 * @todo TODO: Decide if a struct is needed
 */
static int bitplane_decoding(BitPlane *bp, VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;

    int imode, x, y, code, use_vertical_tile, tile_w, tile_h;

        tile_w= use_vertical_tile ? 2 : 3;
        tile_h= use_vertical_tile ? 3 : 2;

        for(y=  bp->height%tile_h; y< bp->height; y+=tile_h){
            for(x=  bp->width%tile_w; x< bp->width; x+=tile_w){
#if VLC_NORM6_METH0D == 1
                code = get_vlc2(gb, vc9_norm6_vlc.table, VC9_NORM6_VLC_BITS, 2);
                if(code<0){
                    av_log(v->s.avctx, AV_LOG_DEBUG, "invalid NORM-6 VLC\n");
                    return -1;
                }
#endif
#if VLC_NORM6_METH0D == 2 //Failure
                code = get_vlc2(gb, vc9_norm6_first_vlc.table, VC9_NORM6_FIRST_BITS, 2);
                if (code == 22)
                {
                    code = vc9_norm6_flc_val[get_bits(gb, 5)];
                }
                else if (code == 23)
                {
#  if TRACE
                    code = get_vlc2(gb, vc9_norm6_second_vlc.table, VC9_NORM6_SECOND_BITS, 2);
                    assert(code>-1 && code<22);
                    code = vc9_norm6_second_val[code];
#  else
                    code = vc9_norm6_second_val[get_vlc2(gb, vc9_norm6_second_vlc.table, VC9_NORM6_SECOND_BITS, 2)];
#  endif
                }
#endif //VLC_NORM6_METH0D == 2
                //FIXME following is a pure guess and probably wrong
                //FIXME A bitplane (0 | !0), so could the shifts be avoided ?
                planep[x     + 0*bp->stride]= (code>>0)&1;
                planep[x + 1 + 0*bp->stride]= (code>>1)&1;
                //FIXME Does branch prediction help here?

        planep = bp->data;
        for (x=0; x<bp->width*bp->height; x++) planep[x] = !planep[x]; //FIXME stride
    }
    return (imode<<1) + invert;
}
/** @} */ //Bitplane group

/***********************************************************************/
/** VOP Dquant decoding
 * @param v VC9 Context
 */
static int vop_dquant_decoding(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int pqdiff;

        }
    }
    return 0;
}

/***********************************************************************/
/** 
 * @defgroup all_frame_hdr All VC9 profiles frame header
 * @brief Part of the frame header decoding from all profiles
 * @warning Only pro/epilog differs between Simple/Main and Advanced => check caller
 * @{
 */
/** B and BI frame header decoding, primary part
 * @see Tables 11+12, p62-65
 * @param v VC9 context
 * @return Status
 * @warning Also handles BI frames
 */
static int decode_b_picture_primary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int pqindex, status;

    }

    return 0;
}

/** B and BI frame header decoding, secondary part
 * @see Tables 11+12, p62-65
 * @param v VC9 context
 * @return Status
 * @warning Also handles BI frames
 * @warning To call once all MB arrays are allocated
 */
static int decode_b_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status;

    }
    /* Epilog (AC/DC syntax) should be done in caller */
    return 0;
}

/** I frame header decoding, primary part
 * @see Tables 5+7, p53-54 and 55-57
 * @param v VC9 context
 * @return Status
 */
static int decode_i_picture_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int pqindex, status = 0;

    /* Epilog (AC/DC syntax) should be done in caller */
    return status;
}

/** P frame header decoding, primary part
 * @see Tables 5+7, p53-54 and 55-57
 * @param v VC9 context
 * @return Status
 */
static int decode_p_picture_primary_header(VC9Context *v)
{
    /* INTERFRM, FRMCNT, RANGEREDFRM read in caller */
    GetBitContext *gb = &v->s.gb;
    int lowquant, pqindex, status = 0;

        v->lumshift = get_bits(gb, 6);
    }
    return 0;
}

/** P frame header decoding, secondary part
 * @see Tables 5+7, p53-54 and 55-57
 * @param v VC9 context
 * @warning To call once all MB arrays are allocated
 * @return Status
 */
static int decode_p_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status = 0;
    if ((v->mv_mode == MV_PMODE_INTENSITY_COMP &&

        }
    }
    /* Epilog (AC/DC syntax) should be done in caller */
    return 0;
}
/** @} */ //End of group all_frm_hdr


/***********************************************************************/
/** 
 * @defgroup std_frame_hdr VC9 Simple/Main Profiles header decoding
 * @brief Part of the frame header decoding belonging to Simple/Main Profiles
 * @warning Only pro/epilog differs between Simple/Main and Advanced =>
 *          check caller
 * @{
 */

/** Frame header decoding, first part, in Simple and Main profiles
 * @see Tables 5+7, p53-54 and 55-57
 * @param v VC9 context
 * @return Status
 */
static int standard_decode_picture_primary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status = 0;

      return status;
    }
    return 0;
}

/** Frame header decoding, secondary part
 * @param v VC9 context
 * @warning To call once all MB arrays are allocated
 * @return Status
 */
static int standard_decode_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int status = 0, index;

    /* AC Syntax */
    v->ac_table_level = decode012(gb);
    if (v->s.pict_type == I_TYPE || v->s.pict_type == BI_TYPE)
    {
        v->ac2_table_level = decode012(gb);
    }
    /* DC Syntax */
    index = decode012(gb);
    v->luma_dc_vlc = &ff_msmp4_dc_luma_vlc[index];
    v->chroma_dc_vlc = &ff_msmp4_dc_chroma_vlc[index];
   
    return 0;
}
/** @} */ //End for group std_frame_hdr

#if HAS_ADVANCED_PROFILE
/***********************************************************************/
/** 
 * @defgroup adv_frame_hdr VC9 Advanced Profile header decoding
 * @brief Part of the frame header decoding belonging to Advanced Profiles
 * @warning Only pro/epilog differs between Simple/Main and Advanced =>
 *          check caller
 * @{
 */
/** Frame header decoding, primary part
 * @param v VC9 context
 * @return Status
 */
static int advanced_decode_picture_primary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    static const int type_table[4] = { P_TYPE, B_TYPE, I_TYPE, BI_TYPE };
    int type, i;

    default: break;
    }
    return 0;
}

/** Frame header decoding, secondary part
 * @param v VC9 context
 * @return Status
 */
static int advanced_decode_picture_secondary_header(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    int index;

    /* AC Syntax */
    v->ac_table_level = decode012(gb);
    if (v->s.pict_type == I_TYPE || v->s.pict_type == BI_TYPE)
    {
        v->ac2_table_level = decode012(gb);
    }
    /* DC Syntax */
    index = decode012(gb);
    v->luma_dc_vlc = &ff_msmp4_dc_luma_vlc[index];
    v->chroma_dc_vlc = &ff_msmp4_dc_chroma_vlc[index];

    return 0;
}
#endif
/** @} */ //End for adv_frame_hdr

/***********************************************************************/
/** 
 * @defgroup block VC9 Block-level functions
 * @see 7.1.4, p91 and 8.1.1.7, p(1)04
 * @todo TODO: Integrate to MpegEncContext facilities
 * @{
 */
/** Decode a luma intra block
 * @warning Will be removed, due to necessary integration
 * @see coeff scaling for Adv Profile: 8.1.1.15, p(1)13, 
 * @param v VC9 context
 * @param mquant Macroblock quantizer scale
 * @return Status
 * @todo TODO: Implement Coeff scaling for Advanced Profile
 */
int decode_luma_intra_block(VC9Context *v, int mquant)
{
    GetBitContext *gb = &v->s.gb;
    int dcdiff;

    }
    /* FIXME: 8.1.1.15, p(1)13, coeff scaling for Adv Profile */

    return 0;
}
/** @} */ //End for group block

/***********************************************************************/
/** 
 * @defgroup std_mb VC9 Macroblock-level functions in Simple/Main Profiles
 * @see 7.1.4, p91 and 8.1.1.7, p(1)04
 * @todo TODO: Integrate to MpegEncContext facilities
 * @{
 */
/**
 * @def GET_CBPCY(table, bits)
 * @brief Get the Coded Block Pattern for luma and chroma
 * @param table VLC table to use (get_vlc2 second parameter)
 * @param bits Average bitlength (third parameter to get_vlc2)
 * @see  8.1.1.5, p(1)02-(1)03
 */
#define GET_CBPCY(table, bits)                                      \
    predicted_cbpcy = get_vlc2(gb, table, bits, 2);             \
    cbpcy[0] = (p_cbpcy[-1] == p_cbpcy[2])                          \
         ? previous_cbpcy[1] : p_cbpcy[+2];                         \
    cbpcy[0] ^= ((predicted_cbpcy>>5)&0x01);                        \

         ? previous_cbpcy[3] : cbpcy[0];                            \
    cbpcy[2] ^= ((predicted_cbpcy>>3)&0x01);                        \
    cbpcy[3] = (cbpcy[1] == cbpcy[0]) ? cbpcy[2] : cbpcy[1];        \
    cbpcy[3] ^= ((predicted_cbpcy>>2)&0x01);
     
/** Decode all MBs for an I frame in Simple/Main profile
 * @see 8.1, p100
 * @todo TODO: Process the blocks
 * @todo TODO: Use M$ MPEG-4 cbp prediction
 */
static int standard_decode_i_mbs(VC9Context *v)
{
    GetBitContext *gb = &v->s.gb;
    MpegEncContext *s = &v->s;
    int current_mb = 0; /* MB/Block Position info */
    uint8_t cbpcy[4], previous_cbpcy[4], predicted_cbpcy,
        *p_cbpcy /* Pointer to skip some math */;

    /* Reset CBPCY predictors */
    memset(v->previous_line_cbpcy, 0, s->mb_stride<<2);

        }
    }
    return 0;
}

/**
 * @def GET_MQUANT
 * @brief Get macroblock-level quantizer scale
 */
#define GET_MQUANT()                                           \
  if (v->dquantfrm)                                            \
  {                                                            \
    if (v->dqprofile == DQPROFILE_ALL_MBS)                     \
    {                                                          \

        else mquant = get_bits(gb, 5);                         \
      }                                                        \
    }                                                          \
  }

/**
 * @def GET_MVDATA(_dmv_x, _dmv_y)
 * @brief Get MV differentials
 * @see MVDATA decoding from 8.3.5.2, p(1)20
 * @param dmv_x Horizontal differential for decoded MV
 * @param dmv_y Vertical differential for decoded MV
 */
#define GET_MVDATA(_dmv_x, _dmv_y)                                  \
  index = 1 + get_vlc2(gb, vc9_mv_diff_vlc[s->mv_table_index].table,\
                       VC9_MV_DIFF_VLC_BITS, 2);                    \
  if (index > 36)                                                   \
  {                                                                 \

    val = get_bits(gb, size_table[index1] - val);               \
    sign = 0 - (val&1);                                             \
    _dmv_y = (sign ^ ((val>>1) + offset_table[index1])) - sign;     \
  }

/** Decode all MBs for an P frame in Simple/Main profile
 * @see 8.1, p(1)15
 * @todo TODO: Process the blocks
 * @todo TODO: Use M$ MPEG-4 cbp prediction
 */
static int decode_p_mbs(VC9Context *v)
{
    MpegEncContext *s = &v->s;
    GetBitContext *gb = &v->s.gb;
    int current_mb = 0, i; /* MB/Block Position info */

        }
    }
    return 0;
}

/** Decode all MBs for an P frame in Simple/Main profile
 * @todo TODO: Process the blocks
 * @todo TODO: Use M$ MPEG-4 cbp prediction
 */
static int decode_b_mbs(VC9Context *v)
{
    MpegEncContext *s = &v->s;
    GetBitContext *gb = &v->s.gb;
    int current_mb = 0, i /* MB / B postion information */;

                    if (v->bfraction > 420 /*1/2*/ &&
                        b_mv_type < 3) b_mv_type = 1-b_mv_type;
                }
                else
                { 
                    GET_MVDATA(dmv1_x, dmv1_y);
                    if (!s->mb_intra /* b_mv1 tells not intra */)
                    {
                        b_mv_type = decode012(gb);
                        if (v->bfraction > 420 /*1/2*/ &&
                            b_mv_type < 3) b_mv_type = 1-b_mv_type;
                    }
                }

            current_mb++;
        }
    }
    return 0;
}
/** @} */ //End for group std_mb

#if HAS_ADVANCED_PROFILE
/***********************************************************************/
/** 
 * @defgroup adv_mb VC9 Macroblock-level functions in Advanced Profile
 * @todo TODO: Integrate to MpegEncContext facilities
 * @todo TODO: Code P, B and BI
 * @{
 */
static int advanced_decode_i_mbs(VC9Context *v)
{
    MpegEncContext *s = &v->s;
    GetBitContext *gb = &v->s.gb;
    int mqdiff, mquant, current_mb = 0, over_flags_mb = 0;

        }
        current_mb++;
    }
    return 0;
}
/** @} */ //End for group adv_mb
#endif

/** Initialize a VC9/WMV3 decoder
 * @todo TODO: Handle VC-9 IDUs (Transport level?)
 * @todo TODO: Decypher remaining bits in extra_data
 */
static int vc9_decode_init(AVCodecContext *avctx)
{
    VC9Context *v = avctx->priv_data;
    MpegEncContext *s = &v->s;
    GetBitContext gb;

#endif

    return 0;
    }

/** Decode a VC9/WMV3 frame
 * @todo TODO: Handle VC-9 IDUs (Transport level?)
 * @warning Initial try at using MpegEncContext stuff
 */
static int vc9_decode_frame(AVCodecContext *avctx,
                            void *data, int *data_size,
                            uint8_t *buf, int buf_size)
{
    VC9Context *v = avctx->priv_data;

    /* Fake consumption of all data */
    *data_size = len;
    return buf_size; //Number of bytes consumed
}

/** Close a VC9/WMV3 decoder
 * @warning Initial try at using MpegEncContext stuff
 */
static int vc9_decode_end(AVCodecContext *avctx)
{
    VC9Context *v = avctx->priv_data;

#if HAS_ADVANCED_PROFILE