Mercurial > emacs
diff etc/termcap.src @ 49600:23a1cea22d13
Trailing whitespace deleted.
| author | Juanma Barranquero <lekktu@gmail.com> |
|---|---|
| date | Tue, 04 Feb 2003 14:56:31 +0000 |
| parents | c440ab734cde |
| children | f0eb34e60705 746c40973d25 |
line wrap: on
line diff
--- a/etc/termcap.src Tue Feb 04 13:30:45 2003 +0000 +++ b/etc/termcap.src Tue Feb 04 14:56:31 2003 +0000 @@ -10,7 +10,7 @@ # #------------------------------------------------------------------------------ # Version 10.2.1 -# $Date: 2002/01/12 17:31:53 $ +# $Date: 2002/04/20 07:38:53 $ # terminfo syntax # # Eric S. Raymond (current maintainer) @@ -44,7 +44,7 @@ # This file assumes a US-ASCII character set. If you need to fix this, start # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers # for your character set. \E(A and \E)A enables the British character set -# with the pound sign at position 2/3. +# with the pound sign at position 2/3. # # In a Japanese-processing environment using EUC/Japanese or Shift-JIS, # C1 characters are considered the first-byte set of the Japanese encodings, @@ -70,7 +70,7 @@ # string-table limit of archaic termcap libraries except where explicitly # noted below. Note that the termcap translation assumes that your termcap # library can handle multiple tc capabilities in an entry. 4.4BSD has this -# capability. Older versions of GNU termcap, through 1.3, do not. +# capability. Older versions of GNU termcap, through 1.3, do not. # # For details on these formats, see terminfo(5) in the ncurses distribution, # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD @@ -102,7 +102,7 @@ # the master format). Individual capabilities are commented out by # placing a period between the colon and the capability name. # -# The file is divided up into major sections (headed by lines beginning with +# The file is divided up into major sections (headed by lines beginning with # the string "########") and minor sections (beginning with "####"); do # # grep "^####" <file> | more @@ -112,7 +112,7 @@ # that important and frequently-encountered terminal types are near the # front (so that you'll get reasonable search efficiency from a linear # search of the termcap form even if you don't use reorder). Minor sections -# usually correspond to manufacturers or standard terminal classes. +# usually correspond to manufacturers or standard terminal classes. # Parenthesized words following manufacturer names are type prefixes or # product line names used by that manufacturers. # @@ -145,18 +145,18 @@ # -s Enable status line. # -vb Use visible bell (:vb:) rather than :bl:. # -w Wide - in 132 column mode. -# If a name has multiple suffixes and one is a line height, that one should -# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. -# +# If a name has multiple suffixes and one is a line height, that one should +# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. +# # Entries with embedded plus signs are designed to be included through use/tc -# capabilities, not used as standalone entries. +# capabilities, not used as standalone entries. # # To avoid search clashes, some older all-numeric names for terminals have # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). # All primary names of terminals now have alphanumeric prefixes. # # Comments marked "esr" are mostly results of applying the termcap-compiler -# code packaged with ncurses and contemplating the resulting error messages. +# code packaged with ncurses and contemplating the resulting error messages. # In many cases, these indicated obvious fixes to syntax garbled by the # composers. In a few cases, I was able to deduce corrected forms for garbled # capabilities by looking at context. All the information in the original @@ -191,7 +191,7 @@ # %c Accept any character # %[...] Accept any number of characters in the given set # -# The cursor position report (<u6>) string must contain two scanf(3)-style +# The cursor position report (<u6>) string must contain two scanf(3)-style # %d format elements. The first of these must correspond to the Y coordinate # and the second to the %d. If the string contains the sequence %i, it is # taken as an instruction to decrement each value after reading it (this is @@ -206,12 +206,12 @@ # All the entries in this file have been edited to assume that the tabset # files directory is /usr/share/tabset, in conformance with the File Hierarchy # Standard for Linux and open-source BSD systems. Some vendors (notably Sun) -# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. +# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. # # No curses package we know of actually uses these files. If their location # is an issue, you will have to hand-patch the file locations before compiling # this file. -# +# # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL # # As the ANSI/ECMA-48 standard and variants take firmer hold, and as @@ -233,8 +233,8 @@ # I'm especially interested in identifying the obscure entries listed under # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal # wisdom about them gets lost. If you know a lot about obscure old terminals, -# please go to the terminfo resource page, grab the UFO file (ufo.ti), and -# eyeball it for things you can identify and describe. +# please go to the terminfo resource page, grab the UFO file (ufo.ti), and +# eyeball it for things you can identify and describe. # # If you have been around long enough to contribute, please read the file # with this in mind and send me your annotations. @@ -245,7 +245,7 @@ # California copyright with dates from 1980 to 1993. # # Some information has been merged in from a terminfo file SCO distributes. -# It has an obnoxious boilerplate copyright which I'm ignoring because they +# It has an obnoxious boilerplate copyright which I'm ignoring because they # took so much of the content from the ancestral BSD versions of this file # and didn't attribute it, thereby violating the BSD Regents' copyright. # @@ -255,7 +255,7 @@ # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. # # This file deliberately has no copyright. It belongs to no one and everyone. -# If you claim you own it, you will merely succeed in looking like a fool. +# If you claim you own it, you will merely succeed in looking like a fool. # Use it as you like. Use it at your own risk. Copy and redistribute freely. # There are no guarantees anywhere. Svaha! # @@ -353,7 +353,7 @@ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\ :ae=\E[10m:as=\E[11m: -# Highlight controls corresponding to the ANSI.SYS standard. Most +# Highlight controls corresponding to the ANSI.SYS standard. Most # console drivers for Intel boxes obey these. Makes the same assumption # about \E[11m as klone+acs. True ANSI/ECMA-48 would have :se=\E[27m:, # :ue=\E[24m:, but this isn't a documented feature of ANSI.SYS. @@ -429,13 +429,13 @@ :am:xo:\ :co#80:li#24:tc=vanilla:tc=ansi+erase:tc=ansi+local1: -# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but +# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but # beware of screen size problems and memory relative cursor addressing. ansi-mini|any ansi terminal with pessimistic assumptions:\ :am:xo:\ :co#80:li#24:tc=vanilla:tc=ansi+cup:tc=ansi+erase: -# ansi-mtabs adds relative addressing and minimal tab support +# ansi-mtabs adds relative addressing and minimal tab support ansi-mtabs|any ansi terminal with pessimistic assumptions:\ :it#8:\ :ta=^I:tc=ansi+local1:tc=ansi-mini: @@ -478,12 +478,12 @@ :sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m: # Procomm and some other ANSI emulations don't recognize all of the ANSI- -# standard capabilities. This entry deletes :UP:, :RI:, :DO:, :LE:, and -# <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:, -# :nd:, :do: and :le:. Also deleted :IC: and :ic:, as QModem up to +# standard capabilities. This entry deletes :UP:, :RI:, :DO:, :LE:, and +# <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:, +# :nd:, :do: and :le:. Also deleted :IC: and :ic:, as QModem up to # 5.03 doesn't recognize these. Finally, we delete :rp: and :sr:, which seem # to confuse many emulators. On the other hand, we can count on these programs -# doing :ae:/:as:/:sa:. Older versions of this entry featured +# doing :ae:/:as:/:sa:. Older versions of this entry featured # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under # ANSI.SYS influence. # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 @@ -531,12 +531,12 @@ :u6=\E[%i%d;%dR:u7=\E[6n:..u8=\E[?%[;0123456789]c:\ :u9=\E[c:tc=ecma+color:tc=klone+sgr:tc=ansi-m: -# ansi-generic is a vanilla ANSI terminal. This is assumed to implement -# all the normal ANSI stuff with no extensions. It assumes -# insert/delete line/char is there, so it won't work with -# vt100 clones. It assumes video attributes for bold, blink, -# underline, and reverse, which won't matter much if the terminal -# can't do some of those. Padding is assumed to be zero, which +# ansi-generic is a vanilla ANSI terminal. This is assumed to implement +# all the normal ANSI stuff with no extensions. It assumes +# insert/delete line/char is there, so it won't work with +# vt100 clones. It assumes video attributes for bold, blink, +# underline, and reverse, which won't matter much if the terminal +# can't do some of those. Padding is assumed to be zero, which # shouldn't hurt since xon/xoff is assumed. ansi-generic|generic ansi standard terminal:\ :am:xo:\ @@ -853,14 +853,14 @@ # Unfortunately, the UNIX PC terminfo entry that comes with ncurses # is broken. All the special key sequences are broken, making it unusable # with Emacs. The problem stems from the following: -# +# # The UNIX PC has a plethora of keys (103 of them, and there's no numeric # keypad!), loadable fonts, and strange highlighting modes ("dithered" # half-intensity, "smeared" bold, and real strike-out, for example.) It also # uses resizable terminal windows, but the bundled terminal program always # uses an 80x24 window (and doesn't support seem to support a 132-column -# mode.) -# +# mode.) +# # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a # library which was a superset of SVr3.5 curses (called tam, for "terminal # access method".) tam includes support for real, overlapping windows, @@ -876,44 +876,44 @@ # (If you're interested in adding some of the tam calls to ncurses, btw, I # have the full documentation and several programs which use tam. It also # used an extended terminfo format to describe key sequences, special -# highlighting modes, etc.) -# +# highlighting modes, etc.) +# # KEYS: This means that ncurses would quite painful on the UNIX PC, since # there are two sequences for every key-modifier combination (local keyboard # sequence and remote "VT100" sequence.) But I doubt many people are trying # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the -# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) -# seem to have been built from the manual describing the VT100 sequences. -# This means it doesn't work for a real live UNIX PC. -# +# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) +# seem to have been built from the manual describing the VT100 sequences. +# This means it doesn't work for a real live UNIX PC. +# # FONTS: The UNIX PC also has a strange interpretation of "alternate # character set". Rather than the VT100 graphics you might expect, it allows # up to 8 custom fonts to be loaded at any given time. This means that # programs expecting VT100 graphics will usually be disappointed. For this # reason I have disabled the smacs/rmacs sequences, but they could easily be -# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) -# manpage), should you wish to do so: -# +# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) +# manpage), should you wish to do so: +# # SGR10 - Select font 0 - ESC [ 10 m or SO # SGR11 - Select font 1 - ESC [ 11 m or SI # SGR12 - Select font 2 - ESC [ 12 m # ... (etc.) # SGR17 - Select font 7 - ESC [ 17 m -# +# # Graphics for line drawing are not reliably found at *any* character # location because the UNIX PC has dynamically reloadable fonts. I use font # 0 for regular text and font 1 for italics, but this is by no means # universal. So ASCII line drawing is in order if smacs/rmacs are enabled. -# +# # MISC: The cursor visible/cursor invisible sequences were swapped in the # distributed terminfo. -# +# # To ameliorate these problems (and fix a few highlighting bugs) I rewrote # the UNIX PC terminfo entry. The modified version works great with Lynx, # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC # attached by serial cable. In Emacs, even the Undo key works, and many -# applications can now use the F1-F8 keys. -# +# applications can now use the F1-F8 keys. +# # esr's notes: # Terminfo entry for the AT&T Unix PC 7300 # from escape(7) in Unix PC 7300 Manual. @@ -928,8 +928,8 @@ # * into font memory slot #1. Once the font has been loaded, # * it can be used as an alternative character set. # * -# * The call to ioctl with the argument WIOCLFONT is the key -# * to this routine. For more information, see window(7) in +# * The call to ioctl with the argument WIOCLFONT is the key +# * to this routine. For more information, see window(7) in # * the PC 7300 documentation. # ***************************************************************/ # #include <string.h> /* needed for strcpy call */ @@ -944,7 +944,7 @@ # * cfont <filename>. For further information on fonts see # * cfont(1) in the PC 7300 documentation. # */ -# +# # struct altfdata /* structure for alt font data */ # { # short altf_slot; /* memory slot number */ @@ -1319,7 +1319,7 @@ :km:\ :co#80:li#25:tc=vt220: -# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and +# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and # DECstation/pmax. rcons|BSD rasterconsole:\ :tc=sun-il: @@ -1442,7 +1442,7 @@ #### 386BSD and BSD/OS Consoles # -# This was the original 386BSD console entry (I think). +# This was the original 386BSD console entry (I think). # Some places it's named oldpc3|oldibmpc3. # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> origpc3|origibmpc3|IBM PC 386BSD Console:\ @@ -1469,7 +1469,7 @@ # are described here. This entry really ought to be upgraded. # Also note, the console will also work with fewer lines after doing # "stty rows NN", e.g. to use 24 lines. -# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) +# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) # Bug: The <op> capability resets attributes. bsdos-pc|IBM PC BSD/OS Console:\ :..sa=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m:\ @@ -1489,17 +1489,17 @@ :..sa=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;:\ :sc=\E7:sf=^J:ta=^I:up=\E[A:tc=klone+sgr: -# Old names for BSD/OS PC console used in releases before 4.1. +# Old names for BSD/OS PC console used in releases before 4.1. pc3|BSD/OS on the PC Console:\ :tc=bsdos-pc-nobold: ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline:\ :tc=bsdos-pc: - -# BSD/OS on the SPARC + +# BSD/OS on the SPARC bsdos-sparc|Sun SPARC BSD/OS Console:\ :tc=sun: - -# BSD/OS on the PowerPC + +# BSD/OS on the PowerPC bsdos-ppc|PowerPC BSD/OS Console:\ :tc=bsdos-pc: @@ -1522,7 +1522,7 @@ # # Except where noted, these entries are DEC's official terminfos. # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support -# Engineering for more information. Updated terminfos and termcaps +# Engineering for more information. Updated terminfos and termcaps # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. # # In October 1995 DEC sold its terminals business, including the VT and Dorio @@ -1543,18 +1543,18 @@ # you output the char in column 80, immediately output CR LF # and then assume you are in column 1 of the next line. If :xn: # is on, am should be on too. -# +# # I assume you have smooth scroll off or are at a slow enough baud # rate that it doesn't matter (1200? or less). Also this assumes -# that you set auto-nl to "on", if you set it off use vt100-nam +# that you set auto-nl to "on", if you set it off use vt100-nam # below. -# +# # The padding requirements listed here are guesses. It is strongly # recommended that xon/xoff be enabled, as this is assumed here. -# -# The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the -# tab settings are in non-volatile memory and don't need to be -# reset upon login. Also setting the number of columns glitches +# +# The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the +# tab settings are in non-volatile memory and don't need to be +# reset upon login. Also setting the number of columns glitches # the screen annoyingly. You can type "reset" to get them set. # # The VT100 series terminals have cursor ("arrows") keys which can operate @@ -1578,7 +1578,7 @@ # The Numeric Keypad which can operate in two different modes: Numeric Mode and # Application Mode. Numeric Mode is the reset state, and is assumed to be # the normal state. Application Mode is the "set" state. In Numeric Mode, -# the numeric and punctuation keys transmit ASCII 7-bit characters, and the +# the numeric and punctuation keys transmit ASCII 7-bit characters, and the # Enter key transmits the same as the Return key (Note: the Return key # can be configured to send either LF (\015) or CR LF). In Application Mode, # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys @@ -1622,7 +1622,7 @@ # # And here, for those of you with orphaned VT100s lacking documentation, is # a description of the soft switches invoked when you do `Set Up'. -# +# # Scroll 0-Jump Shifted 3 0-# # | 1-Smooth | 1-British pound sign # | Autorepeat 0-Off | Wrap Around 0-Off @@ -1699,7 +1699,7 @@ :ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:is=\E7\E[2;24r\E8:\ :ts=\E7\E[1;%dH\E[1K:tc=vt100-am: -# Status line at bottom. +# Status line at bottom. # Clearing the screen will clobber status line. vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline:\ :es:hs:\ @@ -1709,7 +1709,7 @@ # Most of the `vt100' emulators out there actually emulate a vt102 # This entry (or vt102-nsgr) is probably the right thing to use for -# these. +# these. vt102|dec vt102:\ :mi:\ :al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100: @@ -1722,7 +1722,7 @@ # string in the canonical vt100 entry above leaves the screen littered # with little snowflake or star characters (IBM PC ROM character \017 = ^O) # after highlight turnoffs. This entry should fix that, and even leave -# ACS support working, at the cost of making multiple-highlight changes +# ACS support working, at the cost of making multiple-highlight changes # slightly more expensive. # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes):\ @@ -1749,8 +1749,8 @@ # vt132 - like vt100 but slower and has ins/del line and such. # I'm told that :im:/:ei: are backwards in the terminal from the -# manual and from the ANSI standard, this describes the actual -# terminal. I've never actually used a vt132 myself, so this +# manual and from the ANSI standard, this describes the actual +# terminal. I've never actually used a vt132 myself, so this # is untested. # vt132|DEC vt132:\ @@ -1839,7 +1839,7 @@ # at the top of the keyboard. This mapping follows the description given # in the VT220 Programmer Reference Manual and agrees with the labeling # on some terminals that emulate the vt220. There is no support for an F5. -# See vt220 for an alternate mapping. +# See vt220 for an alternate mapping. # vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\ @@ -1878,8 +1878,8 @@ :nw=^M\ED:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ :rf=/usr/lib/tabset/vt100:sc=\E7:se=5\E[27m:sf=\ED:\ :so=5\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m: - -# This was DEC's vt320. Use the purpose-built one below instead + +# This was DEC's vt320. Use the purpose-built one below instead #vt320|DEC VT320 in vt100 emulation mode, # use=vt220, @@ -1890,9 +1890,9 @@ :am@:\ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220: -# These entries are not DEC's official ones, they were purpose-built for the +# These entries are not DEC's official ones, they were purpose-built for the # VT320. Here are the designer's notes: -# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to +# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to # 'Erase to End of Field'... since nothing seems to use 'end' anyways... # khome is Home on a PC kbd. Actually 'FIND' on a VT. # Things that use <knxt> usually use tab anyways... and things that don't use @@ -1902,7 +1902,7 @@ # and the resulting fact that it causes the termcap translation of the entry # to SMASH the 1k-barrier... # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 -# (vt320: uncommented :fs: --esr) +# (vt320: uncommented :fs: --esr) # (untranslatable capabilities removed to fit entry within 1023 bytes) # (sgr removed to fit entry within 1023 bytes) # (acsc removed to fit entry within 1023 bytes) @@ -1957,7 +1957,7 @@ # Emacs v18 terminal modes to deal with the cursor keys in that the arrow # keys were switched into application mode at the same time the numeric pad # is switched into application mode. This changes the definitions of the -# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# arrow keys. Emacs v19 is smarter and mines its keys directly out of # your termcap or terminfo entry, # # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 @@ -1985,8 +1985,8 @@ # DEC doesn't supply a vt400 description, so we add Daniel Glasser's # (originally written with vt420 as its primary name, and usable for it). -# -# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple +# +# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple # text pages and long text pages with selectable length of the vt340, along # with left and right margins, rectangular area text copy, fill, and erase # operations, selected region character attribute change operations, @@ -1998,7 +1998,7 @@ # Emacs v18 terminal modes to deal with the cursor keys in that the arrow # keys were switched into application mode at the same time the numeric pad # is switched into application mode. This changes the definitions of the -# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# arrow keys. Emacs v19 is smarter and mines its keys directly out of # your termcap entry, # # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 @@ -2055,13 +2055,13 @@ # emulators define these): # # if (key < 16) then value = key; -# else if (key < 21) then value = key + 1; +# else if (key < 21) then value = key + 1; # else if (key < 25) then value = key + 2; # else if (key < 27) then value = key + 3; # else if (key < 30) then value = key + 4; # else value = key + 5; # -# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". +# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". # There's no provision in terminfo for emitting a string in this format, so the # application has to know it. # @@ -2352,7 +2352,7 @@ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:\ :mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: -# Compatible with the R5 xterm +# Compatible with the R5 xterm # (from the XFree86 3.2 distribution, <blink=@> removed) # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD # corrected typos in rs2 string - TD @@ -2581,7 +2581,7 @@ # 12-fkey keyboard can support vt220's 20-fkeys. # + maps numeric keypad "+" to ",". # + uses DEC-style control sequences for the application keypad. -# +# xterm-vt220|XFree86 xterm emulating vt220:\ :@1=\EOu:@7=\E[4~:@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:\ :F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\ @@ -2608,10 +2608,10 @@ # This is xterm for ncurses. xterm|xterm terminal emulator (X Window System):\ :tc=xterm-r6: -# use=xterm-xfree86, - -# These entries allow access to the X titlebar and icon name as a status line. -# Note that twm (and possibly window managers descended from it such as tvtwm, +# use=xterm-xfree86, + +# These entries allow access to the X titlebar and icon name as a status line. +# Note that twm (and possibly window managers descended from it such as tvtwm, # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess # with it. xterm+sl|access X title line and icon name:\ @@ -2646,7 +2646,7 @@ # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file xterm-nic|xterm with ich/ich1 suppressed for non-curses programs:\ :IC@:ei=:ic@:im=:tc=xterm: -# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 +# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 xterm1|xterm terminal emulator ignoring the alternate screen buffer:\ :te@:ti@:tc=xterm: @@ -2809,7 +2809,7 @@ # # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. # Since rxvt is not really compatible with xterm, it should be configured as -# "rxvt" (monochrome) and "rxvt-color". +# "rxvt" (monochrome) and "rxvt-color". # (untranslatable capabilities removed to fit entry within 1023 bytes) # (sgr removed to fit entry within 1023 bytes) # (acsc removed to fit entry within 1023 bytes) @@ -2927,7 +2927,7 @@ # via the X resource setting "xterm*sunFunctionKeys:true" # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same. # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z> -# because we want it to be seen as <kcpy>. +# because we want it to be seen as <kcpy>. # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance # with their Sun keyboard labels instead. # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996 @@ -2967,8 +2967,8 @@ #### MGR # # MGR is a Bell Labs window system lighter-weight than X. -# These entries describe MGR's xterm-equivalent. -# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 +# These entries describe MGR's xterm-equivalent. +# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 # mgr|Bellcore MGR (non X) window system terminal emulation:\ @@ -2997,8 +2997,8 @@ ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS # -# Columbus UNIX virtual terminal. This terminal also appears in -# UNIX 4.0 and successors as line discipline 1 (?), but is +# Columbus UNIX virtual terminal. This terminal also appears in +# UNIX 4.0 and successors as line discipline 1 (?), but is # undocumented and does not really work quite right. cbunix|cb unix virtual terminal:\ :am:bs:da:db:\ @@ -3015,7 +3015,7 @@ pty|4bsd pseudo teletype:\ :cm=\EG%+ %+ :se=\Eb$:so=\Ea$:ue=\Eb!:us=\Ea!:tc=cbunix: -# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 +# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 eterm|gnu emacs term.el terminal emulation:\ :am:mi:xn:\ :co#80:li#24:\ @@ -3027,7 +3027,7 @@ :sf=^J:so=\E[7m:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\ :ue=\E[m:up=\E[A:us=\E[4m: -# Entries for use by the `screen' program by Juergen Weigert, +# Entries for use by the `screen' program by Juergen Weigert, # Michael Schroeder, Oliver Laumann. The screen and # screen-w entries came with version 3.7.1. The screen2 and screen3 entries # come from University of Wisconsin and may be older. @@ -3338,8 +3338,8 @@ # (wsiris: this had extension capabilities # :HS=\E7F2:HE=\E7F7:\ # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: -# See the note on Iris extensions near the end of this file. -# Finally, removed suboptimal :cl:=\EH\EJ and added :do: & +# See the note on Iris extensions near the end of this file. +# Finally, removed suboptimal :cl:=\EH\EJ and added :do: & # :vb: from BRL -- esr) wsiris|iris40|iris emulating a 40 line visual 50 (approximately):\ :am:bs:nc:pt:\ @@ -3453,7 +3453,7 @@ news-42-sjis:\ :tc=news-42: # -# NEWS-OS old termcap entry +# NEWS-OS old termcap entry # # (news-old-unk: this had :KB=news:TY=sjis: --esr) news-old-unk|SONY NEWS vt100 emulator common entry:\ @@ -3684,7 +3684,7 @@ # but the termcap entry is actually broken and unusable as given; the :do: # capability is misspelled "d". # -# To use this, you need to a bunch of environment variables: +# To use this, you need to a bunch of environment variables: # # SET _POSIX_TERM=on # SET TERM=ansi @@ -3696,7 +3696,7 @@ # Important note: setting the TMP environment variable in POSIX style renders # it incompatible with a lot of other applications, including Visual C++. So # you should have a separate command window just for vi. All the other -# variables may be permanently set in the Control Panel\System applet. +# variables may be permanently set in the Control Panel\System applet. # # You can find out more about the restrictions of this facility at # <http://www.nentug.org/unix-to-nt/ntposix.htm>. @@ -3813,14 +3813,14 @@ #### Hewlett-Packard (hp) # # Hewlett-Packard -# 8000 Foothills Blvd +# 8000 Foothills Blvd # Roseville, CA 95747 # Vox: 1-(916)-785-4363 (Technical response line for VDTs) # 1-(800)-633-3600 (General customer support) # # # As of March 1998, HP no longer has any terminals in production. -# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being +# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being # supported (they still have parts). So are the 2392a and 2394a. # See the WORKSTATION CONSOLES section for the 700s. # @@ -3845,9 +3845,9 @@ hp+pfk-cr|hp function keys w/o CR:\ :k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew: -# The hp2621s use the same keys for the arrows and function keys, -# but not separate escape sequences. These definitions allow the -# user to use those keys as arrow keys rather than as function +# The hp2621s use the same keys for the arrows and function keys, +# but not separate escape sequences. These definitions allow the +# user to use those keys as arrow keys rather than as function # keys. hp+pfk+arrows|hp alternate arrow definitions:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:kF=\Er\r:kH=\Eq\r:kR=\Es\r:\ @@ -3871,16 +3871,16 @@ # Due to severe 2621 braindamage, the only way to get the arrow keys to # transmit anything at all is to turn on the function key labels # with :ks:, and even then the user has to hold down shift! -# The default 2621 turns off the labels except when it has to to -# enable the function keys. If your installation prefers labels -# on all the time, or off all the time (at the "expense" of the +# The default 2621 turns off the labels except when it has to to +# enable the function keys. If your installation prefers labels +# on all the time, or off all the time (at the "expense" of the # function keys), use 2621-nl or 2621-wl. -# -# Note: there are newer ROMs for 2621's that allow you to set -# strap A so the regular arrow keys xmit \EA, etc, as with the -# 2645. However, even with this strap set, the terminal stops +# +# Note: there are newer ROMs for 2621's that allow you to set +# strap A so the regular arrow keys xmit \EA, etc, as with the +# 2645. However, even with this strap set, the terminal stops # xmitting if you reset it, until you unset and reset the strap! -# Since there is no way to set/unset the strap with an escape +# Since there is no way to set/unset the strap with an escape # sequence, we don't use it in the default. # If you like, you can use 2621-ba (brain-damaged arrow keys). hp2621-ba|2621 w/new rom and strap A set:\ @@ -3910,7 +3910,7 @@ :kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\ :ku=\EA:tc=hp2621: -# 2621 using all 48 lines of memory, only 24 visible at any time. +# 2621 using all 48 lines of memory, only 24 visible at any time. hp2621-48|48 line 2621:\ :li#48:\ :cm=\E&a%r%dc%dR:cv=\E&a%dR:ho=\EH:tc=hp2621: @@ -3919,38 +3919,38 @@ hp2621-nl|hp 2621 with no labels:\ :kd@:ke@:kh@:kl@:kr@:ks@:ku@:tc=hp2621-fl: -# Needed for UCB ARPAVAX console, since lsi-11 expands tabs +# Needed for UCB ARPAVAX console, since lsi-11 expands tabs # (wrong). # hp2621-nt|hp 2621 w/no tabs:\ :ta@:tc=hp2621: # Hp 2624 B with 4 or 10 pages of memory. -# -# Some assumptions are made with this entry. These settings are +# +# Some assumptions are made with this entry. These settings are # NOT set up by the initialization strings. -# +# # Port Configuration # RecvPace=Xon/Xoff # XmitPace=Xon/Xoff # StripNulDel=Yes -# +# # Terminal Configuration # InhHndShk=Yes # InhDC2=Yes # XmitFnctn(A)=No # InhEolWrp=No -# +# # Note: the 2624 DOES have a true :ho:, believe it or not! -# -# The 2624 has an "error line" to which messages can be sent. +# +# The 2624 has an "error line" to which messages can be sent. # This is CLOSE to what is expected for a "status line". However, -# after a message is sent to the "error line", the next carriage -# return is EATEN and the "error line" is turned back off again! +# after a message is sent to the "error line", the next carriage +# return is EATEN and the "error line" is turned back off again! # So I guess we can't define :hs:, :es:, :ws:, :ds:, :fs:, :ts:. -# -# This entry supports emacs (and any other program that uses raw -# mode) at 4800 baud and less. I couldn't get the padding right +# +# This entry supports emacs (and any other program that uses raw +# mode) at 4800 baud and less. I couldn't get the padding right # for 9600. # # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) @@ -3959,21 +3959,21 @@ :lm#96:\ :vb=\E&w13F\E&w12F\E&w13F\E&w12F:tc=hp+labels:tc=scrhp: -# This hp2626 entry does not use any of the fancy windowing stuff +# This hp2626 entry does not use any of the fancy windowing stuff # of the 2626. -# -# Indeed, terminfo does not yet handle such stuff. Since changing -# any window clears memory, it is probably not possible to use +# +# Indeed, terminfo does not yet handle such stuff. Since changing +# any window clears memory, it is probably not possible to use # this for screen opt. -# -# ed is incredibly slow most of the time - I am guessing at the -# exact padding. Since the terminal uses xoff/xon this is intended -# only for cost computation, so that the terminal will prefer el +# +# ed is incredibly slow most of the time - I am guessing at the +# exact padding. Since the terminal uses xoff/xon this is intended +# only for cost computation, so that the terminal will prefer el # or even dl1 which is probably faster! -# -# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only -# extra slow on the last line of the window. -# +# +# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only +# extra slow on the last line of the window. +# # The padding probably should be changed. # hp2626|hp2626a|hp2626p|hp 2626:\ @@ -3982,10 +3982,10 @@ :SF=\E&r%dD:SR=\E&r%dU:cd=\ED\EJ\EC:ip=:is=\E&j@\r:\ :tc=hp+pfk+cr:tc=hp+labels:tc=scrhp: -# This entry is for sysline. It allocates a 23 line window with -# a 115 line workspace for regular use, and a 1 line window for +# This entry is for sysline. It allocates a 23 line window with +# a 115 line workspace for regular use, and a 1 line window for # the status line. -# +# # This assumes port 2 is being used. # Turn off horizontal line, Create ws #1 with 115 lines, # Create ws #2 with 1 line, Create window #1 lines 1-23, @@ -4031,7 +4031,7 @@ :is=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r:\ :kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=hp2627a: -# hp2640a doesn't have the Y cursor addressing feature, and C is +# hp2640a doesn't have the Y cursor addressing feature, and C is # memory relative instead of screen relative, as we need. # hp2640a|hp 2640a:\ @@ -4066,14 +4066,14 @@ hp2648|hp2648a|HP 2648a graphics terminal:\ :cl=\EH\EJ:cm=\E&a%r%dc%dY:dc=\EP:ip=:tc=hp2645: -# The HP 150 terminal is a fairly vanilla HP terminal, with the -# clreol standout problem. It also has graphics capabilities and +# The HP 150 terminal is a fairly vanilla HP terminal, with the +# clreol standout problem. It also has graphics capabilities and # a touch screen, which we don't describe here. hp150|hewlett packard Model 150:\ :bs:tc=hp2622: -# HP 2382a terminals, "the little ones." They don't have any -# alternate character set support and sending out ^N/^O will +# HP 2382a terminals, "the little ones." They don't have any +# alternate character set support and sending out ^N/^O will # leave the screen blank. hp2382a|hp2382|hewlett packard 2382a:\ :da:db:\ @@ -4132,8 +4132,8 @@ # The new hp2621b is kind of a cross between the old 2621 and the -# new 262x series of machines. It has dip-switched options. -# The firmware has a bug in it such that if you give it a null +# new 262x series of machines. It has dip-switched options. +# The firmware has a bug in it such that if you give it a null # length label, the following character is eaten! hp2621b|hp 2621b with old style keyboard:\ :Nl#8:lh#1:lm#48:lw#8:\ @@ -4155,15 +4155,15 @@ # Some assumptions are made in the following entries. # These settings are NOT set up by the initialization strings. -# +# # Port Configuration # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes -# +# # Terminal Configuration # InhHndShk(G)=Yes InhDC2(H)=Yes # XmitFnctn(A)=No InhEolWrp=No # -# +# # Hp 2622a & hp2623a display and graphics terminals # hp2622|hp2622a|hp 2622:\ @@ -4197,7 +4197,7 @@ hp2397a|hp2397|hewlett packard 2397A color terminal:\ :is=\E&w6f80X:tc=memhp:tc=hp+labels:tc=hp+color: -# HP 700/44 Setup parameters: +# HP 700/44 Setup parameters: # Terminal Mode HP-PCterm # Inhibit Auto Wrap NO # Status Line Host Writable @@ -4207,7 +4207,7 @@ # Keycode Mode NO or YES (sc) # Backspace Key BS or BS/DEL # -# :is: sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; +# :is: sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; # \E\\? does not turn off keycode mode # <smsc> sets alternate start/stop; keycode on hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode:\ @@ -4246,10 +4246,10 @@ # hpex: # May be used for most 24 x 80 hp terminals, -# but has no padding added, so may allow runover in some terminals at high -# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and -# hp98x5 terminal emulators or hp98x6 consoles. -# Adds xy-cursor addressing, vertical cursor addressing, home, +# but has no padding added, so may allow runover in some terminals at high +# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and +# hp98x5 terminal emulators or hp98x6 consoles. +# Adds xy-cursor addressing, vertical cursor addressing, home, # last line, and underline capabilities. # # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", @@ -4410,7 +4410,7 @@ # emulations (usually their stupidest, and usually labeled adm3, though # these `adm3' emulations normally have adm3a+ capabilities). # -# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a +# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') # was being held to ground would trigger a send of the top line on the screen. # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 @@ -4483,15 +4483,15 @@ # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had # :is:=\Eq but that looked wrong; this :is: is from Dave Yost <esquire!yost> -# via BRL. That entry asserted :sg#1:, but I've left that out because +# via BRL. That entry asserted :sg#1:, but I've left that out because # neither earlier nor later ADMSs have it -- esr) # # You will need to get into the supervisor setup before you can set # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should # see a lot more setup options. -# +# # While in supervisor setup you can also use following codes: -# +# # Ctrl-P Personality character selections (configure for example what # arrow keys send, if I recall correctly) # Ctrl-T tabs 1-80 use left&right to move and up to set and @@ -4504,15 +4504,15 @@ # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. # Ctrl-R Reads both setup and functions keys from NVM. # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status -# +# # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to # RTS/CTS used nowadays with virtually every modem and computer. 19200 # bps works fine with hardware flow control. -# +# # The following null-modem cable should fix this and enable you to use # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also # set ADM-12+ for DTR handshaking from supervisor setup. -# +# # PC Serial ADM-12+ # -------- ------- # 2 - 3 @@ -4578,7 +4578,7 @@ # + + # +-+ +-+ # + + -# + S5 S6 S7 + +# + S5 S6 S7 + # + == == == + # +----------------------------------------------+ # front of case (keyboard) @@ -4726,8 +4726,8 @@ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:im=\Eq:ip=:kd=^J:kh=^^:\ :kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:pc=\177:sf=^J:ta=^I:ue@:\ :up=^K:us@:vs=\EC\E3 \E3(:tc=adm+sgr: -# The following termcap for the Lear Siegler ADM-42 leaves the -# "system line" at the bottom of the screen blank (for those who +# The following termcap for the Lear Siegler ADM-42 leaves the +# "system line" at the bottom of the screen blank (for those who # find it distracting otherwise) adm42-ns|lsi adm-42 with no system line:\ :al=\EE\EF \011:bt=\EI\EF \011:cd=\EY\EF \011:\ @@ -4816,11 +4816,11 @@ :sg#1:tc=qvt101+: # This used to have :vs=\E.2: but no :ve: or :vi:. The BSD termcap -# file had :vs=\EM4 \200\200\200:. I've done the safe thing and yanked +# file had :vs=\EM4 \200\200\200:. I've done the safe thing and yanked # both. The :mr: is from BSD, which also claimed bold=\E( and dim=\E). # What seems to be going on here is that this entry was designed so that # the normal highlight is bold and standout is dim plus something else -# (reverse-video maybe? But then, are there two :mr: sequences?) +# (reverse-video maybe? But then, are there two :mr: sequences?) qvt101+|qvt101p|qume qvt 101 PLUS product:\ :am:bw:hs:ul:\ :co#80:li#24:sg#0:\ @@ -4911,7 +4911,7 @@ # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 # Switch settings are: -# +# # S1 1 2 3 4 # D D D D 9600 # D D D U 50 @@ -4929,7 +4929,7 @@ # U U D U 7200 # U U U D 9600 # U U U U 19200 -# +# # S1 5 6 7 8 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored) # U D X U 7N2 @@ -4941,51 +4941,51 @@ # D D X U 8N2 # D U D D 8O1 # D U U U 8E2 -# +# # S1 9 Autowrap # U on # D off -# +# # S1 10 CR/LF # U do CR/LF when CR received # D do CR when CR received -# +# # S2 1 Mode # U block # D conversational -# +# # S2 2 Duplex # U half # D full -# +# # S2 3 Hertz # U 50 # D 60 -# +# # S2 4 Edit mode # U local # D duplex -# +# # S2 5 Cursor type # U underline # D block -# +# # S2 6 Cursor down key # U send ^J # D send ^V -# +# # S2 7 Screen colour # U green on black # D black on green -# +# # S2 8 DSR status (pin 6) # U disconnected # D connected -# +# # S2 9 DCD status (pin 8) # U disconnected # D duplex -# +# # S2 10 DTR status (pin 20) # U disconnected # D duplex @@ -5016,7 +5016,7 @@ # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 # D U D D 8O1 D U U U 8E2 -# +# # S1 9 Autowrap (U = on, D = off) # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) # S2 1 Mode (U = block, D = conversational) @@ -5056,8 +5056,8 @@ # reset to page 0 when exiting curses application (\E-07 ) tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages:\ :te=\E-07\s:ti=\E-17\s:tc=tvi912: -# We got some new tvi912c terminals that act really weird on the regular -# termcap, so one of our gurus worked this up. Seems that cursor +# We got some new tvi912c terminals that act really weird on the regular +# termcap, so one of our gurus worked this up. Seems that cursor # addressing is broken. tvi912cc|tvi912 at cowell college:\ :cm@:tc=tvi912c: @@ -5082,7 +5082,7 @@ # 9: Even parity Odd parity # 10: Steady cursor Blinking cursor # (On Rev E or lower, use W25 instead of switch 10.) -# +# # S5 UART/Terminal options: # Open Closed # 1: P3-6 Not connected DSR received on P3-6 @@ -5108,10 +5108,10 @@ # # S4/W31: Enables automatic LF upon receipt of CR from # remote or keyboard. -# S4/W32: Enables transmission of EOT at the end of Send. If not +# S4/W32: Enables transmission of EOT at the end of Send. If not # installed, a carriage return is sent. # S4/W33: Disables automatic carriage return in column 80. -# S4/W34: Selects Page Print Mode as initial condition. If not +# S4/W34: Selects Page Print Mode as initial condition. If not # installed, Extension Mode is selected. # tvi920b|tvi920c|new televideo 920:\ @@ -5195,19 +5195,19 @@ # U U D U 7200 # U U U D 9600 # U U U U 19200 -# -# +# +# # Settings for word length and stop-bits (S1) # # Position Description -# 5 6 +# 5 6 # --------------------------- # U - 7-bit word # D - 8-bit word # - U 2 stop bits # - D 1 stop bit -# -# +# +# # S2 (external) settings # # Position Up Dn Description @@ -5220,19 +5220,19 @@ # -------------------------------------------- # 3 X # 4 X No parity -# 5 X +# 5 X # -------------------------------------------- # 3 X # 4 X Odd parity -# 5 X +# 5 X # -------------------------------------------- # 3 X # 4 X Even parity -# 5 X +# 5 X # -------------------------------------------- -# 3 X +# 3 X # 4 X Mark parity -# 5 X +# 5 X # -------------------------------------------- # 3 X # 4 X Space parity @@ -5245,47 +5245,47 @@ # 8 X # -------------------------------------------- # 7 X Full Duplex -# 8 X +# 8 X # -------------------------------------------- # 7 X Block mode -# 8 X +# 8 X # -------------------------------------------- # 9 X 50 Hz # X 60 Hz # -------------------------------------------- # 10 X CR/LF (Auto LF) # X CR only -# +# # S3 (internal switch) settings: -# +# # Position Up Dn Description # -------------------------------------------- -# 1 X Keyclick off +# 1 X Keyclick off # X Keyclick on # -------------------------------------------- # 2 X English -# 3 X +# 3 X # -------------------------------------------- # 2 X German -# 3 X +# 3 X # -------------------------------------------- # 2 X French -# 3 X +# 3 X # -------------------------------------------- # 2 X Spanish -# 3 X +# 3 X # -------------------------------------------- # 4 X Blinking block cursor -# 5 X +# 5 X # -------------------------------------------- # 4 X Blinking underline cursor -# 5 X +# 5 X # -------------------------------------------- # 4 X Steady block cursor -# 5 X +# 5 X # -------------------------------------------- # 4 X Steady underline cursor -# 5 X +# 5 X # -------------------------------------------- # 6 X Screen blanking timer (ON) # X Screen blanking timer (OFF) @@ -5323,7 +5323,7 @@ # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 -# for additional capabilities, +# for additional capabilities, # The following tvi descriptions from B:pjphar and virus!mike # is for all 950s. It sets the following attributes: # full duplex (\EDF) write protect off (\E() @@ -5342,11 +5342,11 @@ # start-protected field delimiter (\Ex2\200\200) # end-protected field delimiter (\Ex3\200\200) # set end of text delimiter to carriage return/null (\Ex4\r\200) -# +# # TVI 950 Switch Setting Reference Charts -# +# # TABLE 1: -# +# # S1 1 2 3 4 5 6 7 8 9 10 # +-----------------------+-----+-----+-----------------------+ # | Computer Baud Rate |Data |Stop | Printer Baud Rate | @@ -5356,8 +5356,8 @@ # +------+-----------------------+-----+-----+-----------------------+ # | Down | TABLE 2 | 8 | 1 | TABLE 2 | # +------+-----------------------+-----+-----+-----------------------+ -# -# +# +# # S2 1 2 3 4 5 6 7 8 9 10 # +-----+-----+-----------------+-----+-----------+-----+-----+ # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| @@ -5366,9 +5366,9 @@ # +------+-----+-----+-----------------+-----+-----------+-----+-----+ # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | # +------+-----+-----+-----------------+-----+-----------+-----+-----+ -# +# # TABLE 2: -# +# # +-----------+-----+-----+-----+-----+-----------+ # | Display | 1 | 2 | 3 | 4 | Baud | # +-----------+-----+-----+-----+-----+ | @@ -5391,7 +5391,7 @@ # | D | U | U | U | 9600 | # | U | U | U | U | 19200 | # +-----+-----+-----+-----+-----------+ -# +# # TABLE 3: # +-----+-----+-----+-----------+ # | 3 | 4 | 5 | Parity | @@ -5403,7 +5403,7 @@ # | U | U | U | Space | # +-----+-----+-----+-----------+ # X = don't care -# +# # CHART: # +-----+-----+-----------------+ # | 7 | 8 | Communication | @@ -5413,11 +5413,11 @@ # | U | D | Block | # | U | U | Local | # +-----+-----+-----------------+ -# -# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". -# I also inserted :ic: and :kI:; the :ko: string indicated that :IC: +# +# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". +# I also inserted :ic: and :kI:; the :ko: string indicated that :IC: # should be present and all tvi native modes use the same string for this. -# Finally, note that BSD has cud1=^V. -- esr) +# Finally, note that BSD has cud1=^V. -- esr) tvi950|televideo 950:\ :am:bs:hs:mi:ms:xn:xo:\ :co#80:it#8:li#24:sg#1:\ @@ -5532,11 +5532,11 @@ :te=\E[H\E[J\E[V:ti=\E[U\E[?20l\E[?7h\E[1Q:tc=tvi970: # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars # per line (rather than 40), Esc K chooses the normal character set. Not sure -# padding is needed, but adapted from the tvi920c termcap. The :so: and +# padding is needed, but adapted from the tvi920c termcap. The :so: and # :us: strings are klutzy, but at least use no screen space. # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>, # its absence means <smam>=\Ev isn't safe to use. -- esr) -# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. +# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. # The :cd:/:k0:/:k1:/:kh:/<mc4>, and <mc5> caps are from BRL, which says: # F1 and F2 should be programmed as ^A and ^B; required for UNIFY. tvipt|televideo personal terminal:\ @@ -5582,7 +5582,7 @@ # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs> # Recently I hacked together the following termcap for Visual # Technology's Visual 50 terminal. It's a slight modification of -# the vt52 termcap. +# the vt52 termcap. # It's intended to run when the Visual 50 is in vt52 emulation mode # (I know what you're thinking; if it's emulating a vt52, then why # another termcap? Well, it turns out that the Visual 50 can handle @@ -5840,7 +5840,7 @@ # To further complicate things one of the attributes must be # black (either the foreground or the background). In reverse video # the background changes color with black letters. In normal video -# the foreground changes colors on a black background. +# the foreground changes colors on a black background. # This terminfo uses some of the more advanced features of curses # to display both color and blink. In the final analysis I am not # sure that the wy350 runs better with this terminfo than it does @@ -6322,7 +6322,7 @@ # (instead of application), and change \E[ to \233 for all the keys in # terminfo. At one point, I found some reference indicating that this # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just -# me), but I can't find that and the server under my bookmark to "Wyse +# me), but I can't find that and the server under my bookmark to "Wyse # Technical" isn't responding. So there's the question of wether the wy85 # terminfo should reflect the manufactuer's intended behaviour of the terminal # or the actual." @@ -6433,7 +6433,7 @@ :up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr: # -# lines 24 columns 80 vb +# lines 24 columns 80 vb # wy325-vb|wyse325-vb|wyse-325 with visual bell:\ :bl@:tc=wy325: @@ -6457,7 +6457,7 @@ :Nl@:lh@:li#25:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325-w: # -# lines 25 columns 132 vb +# lines 25 columns 132 vb # wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video:\ :bl@:tc=wy325-w: @@ -6475,7 +6475,7 @@ :Nl@:lh@:li#42:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325-w: # -# lines 42 columns 132 vb +# lines 42 columns 132 vb # wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell:\ :bl@:tc=wy325-w: @@ -6492,7 +6492,7 @@ :Nl@:lh@:li#43:lw@:\ :pn@:r3=\EwG\Ee):tc=wy325-w: # -# lines 43 columns 132 vb +# lines 43 columns 132 vb # wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell:\ :bl@:tc=wy325-w: @@ -6621,7 +6621,7 @@ # #TITLE: TERMINFO ENTRY WY520 #DATE: 8/5/93 -# The WY520 terminfo is based on the WY285 entry published on the WYSE +# The WY520 terminfo is based on the WY285 entry published on the WYSE # BBS with the addition of more function keys and special keys. # # rs1 -> set personality @@ -6951,7 +6951,7 @@ # level 0: # ^L -- clear window/reset current attribute to default # ^V^A%p1%c -- set current color attribute, parameter decodes as follows: -# +# # bit: 6 5 4 3 2 1 0 # | | | | | # +---+---+ | +---+---+ @@ -6962,8 +6962,8 @@ # level 0+: # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines -# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 -# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 +# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 +# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 # (^V^L and ^V^M set the current attribute as a side-effect.) # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes # in the pattern, <c> the number of times the pattern @@ -6980,7 +6980,7 @@ # ^V^T -- change highlight at current cursor poition to %c # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b> # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c -# -- define window +# -- define window # # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 # (The :mb:/:md:/:mr:/:as:/:us:/:so: capabilities exist only to @@ -7041,14 +7041,14 @@ # Command Character is 0xFE (decimal 254, octal 376) # # On this device, cursor addressability isn't possible. The LCD expects: -# 0xfe G <col> <row> +# 0xfe G <col> <row> # for cup: %p1 == row and %p2 is column # # This line: # cup=\376G%p2%c%p1%c -# LOOKS like it will work, but sometimes only one of the two numbers is sent. +# LOOKS like it will work, but sometimes only one of the two numbers is sent. # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. -# +# # Alas, there is no cursor upline capability on this display. # # These entries add some 'sanity stuff' to the clear function. That is, it @@ -7109,7 +7109,7 @@ # bold= reverse + underline = 2 | 3. # note that half-bright blinking doesn't look different from normal blinking. # NOTE:you must program the function keys first, label second! -# (att4410: a BSD entry has been seen with the following capabilities: +# (att4410: a BSD entry has been seen with the following capabilities: # :is=\E[?6l:, :k1=\EOc:, :k2=\EOd:, :k3=\EOe:, :k4=\EOg:, # :k6=\EOh:, :k7=\EOi:, :k8=\EOj:, -- esr) # (untranslatable capabilities removed to fit entry within 1023 bytes) @@ -7162,7 +7162,7 @@ :sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: -# +# # Teletype Model 5420 -- A souped up 5410, with multiple windows, # even! the 5420 has three modes: scroll, window or page mode # this terminfo should work in scroll or window mode, but doesn't @@ -7190,7 +7190,7 @@ # :i3: set screen color to black, # No representation in terminfo for the delete word key: kdw1=\Ed # Key capabilities assume the power-up send sequence... -# This :te: is not strictly necessary, but it helps maximize +# This :te: is not strictly necessary, but it helps maximize # memory usefulness: :te=\Ez:, # Alternate sgr0: :me=\E[m\EW^O:, # Alternate sgr: :sa=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;:, @@ -7232,7 +7232,7 @@ # Note that this mode permits programming USER PF KEYS and labels # However, when you program user pf labels you have to reselect -# user pf keys to make them appear! +# user pf keys to make them appear! att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels:\ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:\ :..pn=\E[%p1%d;0;0;1q%p2%\:-16.16s:\ @@ -7309,13 +7309,13 @@ # The following is a terminfo entry for the Teletype 4424 # asynchronous keyboard-display terminal. It supports # the vi editor. The terminal must be set up as follows, -# +# # HIGHLIGHT DEFINITION 3-TONE # DISPLAY FUNCTION GROUP III -# +# # The second entry below provides limited (a la adm3a) # operation under GROUP II. -# +# # This must be used with DISPLAY FUNCTION GROUP I or III # and HIGHLIGHT DEFINITION 3-TONE # The terminal has either bold or blink, depending on options @@ -7356,12 +7356,12 @@ :nd=\E[C:nw=^M^J:se=\E[m:sf=^J:so=\E[7m:sr=\ET:ta=^I:\ :ue=\E[m:up=\E[A:us=\E[4m: -# The Teletype 5425 is really version 2 of the Teletype 5420. It -# is quite similar, except for some minor differences. No page -# mode, for example, so all of the :cm: sequences used above have -# to change back to what's being used for the 5410. Many of the +# The Teletype 5425 is really version 2 of the Teletype 5420. It +# is quite similar, except for some minor differences. No page +# mode, for example, so all of the :cm: sequences used above have +# to change back to what's being used for the 5410. Many of the # option settings have changed their numbering as well. -# +# # This has been tested on a preliminary model. # # (att5425: added <rmam>/<smam> based on the init string -- esr) @@ -7396,7 +7396,7 @@ :co#132:lm#54:ws#97:\ :i1=\E[?3h:tc=tty5425: -# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. +# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. # I also added <rmam>/<smam> -- esr) att4426|tty4426|teletype 4426S:\ :am:da:db:xo:\ @@ -7417,7 +7417,7 @@ :us=\E[4m: # Terminfo entry for the AT&T 510 A Personal Terminal -# Function keys 9 - 16 are available only after the +# Function keys 9 - 16 are available only after the # screen labeled (soft keys/action blocks) are labeled. Function key # 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. @@ -7450,9 +7450,9 @@ # Function key 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. # -# There are problems with soft key labeling. These are due to +# There are problems with soft key labeling. These are due to # strangenesses in the native terminal that are impossible to -# describe in a terminfo. +# describe in a terminfo. # (untranslatable capabilities removed to fit entry within 1023 bytes) # (sgr removed to fit entry within 1023 bytes) # (acsc removed to fit entry within 1023 bytes) @@ -7742,9 +7742,9 @@ # ESC [ 50;4| set 700 native mode (really is 605) # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) # ESC [ 53;0| set GenFlow to Xon/Xoff -# ESC [ 8 ;0| set CR on NL +# ESC [ 8 ;0| set CR on NL # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) -# ESC [ ? 4 l jump scroll +# ESC [ ? 4 l jump scroll # ESC [ ? 5 l/h video: normal (l); reverse (h) # ESC [ ?13 l Labels on # ESC [ ?15 l parity check = no @@ -7766,7 +7766,7 @@ # and the rmso/smso settings from the 730. # # Note: For the same reason as above in rmso I changed exit under-score mode -# to specifically turn off underscore, rather than return to all normal +# to specifically turn off underscore, rather than return to all normal # attributes # # Note: The following pkey_xmit is taken from the 605V2 which contained the @@ -7838,7 +7838,7 @@ # att730 has status line of 80 chars # These were commented out: :SF=\E[%p1%dS:, :SR=\E[%p1%dT:, # the <kf25> and up keys are used for shifted system Fkeys -# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is +# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is # currently the same as :kh: (unshifted HOME or \E[H). On the 102, 102+1 # and 122 key keyboards, the 730's translation is \E[2J. For consistency # <kHOM> has been commented out. The user can uncomment <kHOM> if using the @@ -7921,7 +7921,7 @@ # # MAIL # -# version 1 note: +# version 1 note: # The character string sent by key 'kf26' may be user programmable # to send either \E[16s, or \E[26s. # The character string sent by key 'krfr' may be user programmable @@ -8136,7 +8136,7 @@ :co#132:li#24:\ :bl=^G:cr=^M:do=^J:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\ :sf=^J:tc=ampex219: -# (ampex232: removed :if=/usr/share/tabset/ampex:, no file and no :st: --esr) +# (ampex232: removed :if=/usr/share/tabset/ampex:, no file and no :st: --esr) ampex232|ampex-232|Ampex Model 232:\ :am:\ :co#80:li#24:sg#1:\ @@ -8145,7 +8145,7 @@ :k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\ :k8=^AH\r:k9=^AI\r:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\ :mk@:nd=^L:ta=^I:up=^K:vb=\Eb\Ed:ve=\E.4:vi=\E.0:tc=adm+sgr: -# (ampex: removed :if=/usr/share/tabset/amp-132:, no file and no :st: -- esr) +# (ampex: removed :if=/usr/share/tabset/amp-132:, no file and no :st: -- esr) ampex232w|Ampex Model 232 / 132 columns:\ :co#132:li#24:\ :is=\E\034Eg\El:tc=ampex232: @@ -8505,8 +8505,8 @@ # Fax: (516)-342-7378 # Web: http://boundless.com # -# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". -# In 1995 Boundless acquired DEC's terminals business. +# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". +# In 1995 Boundless acquired DEC's terminals business. # # Regent: lowest common denominator, works on all regents. @@ -8553,7 +8553,7 @@ :se@:so@:ue@:us@:vs@:tc=viewpoint: # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92 -# The :vi:/:ve:/:sa:/:me: strings were added by ESR from specs. +# The :vi:/:ve:/:sa:/:me: strings were added by ESR from specs. # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, # underline=01100000, rev=01010000, blink=01000010,dim=01000001, # invis=01000100 and %c is the logical or of desired attributes. @@ -8657,7 +8657,7 @@ # terminal. Then change any options you want (provided that they are # compatible with the termcap). For my terminal I set: Screen # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: -# on. I also set up mine for parity (but you may not need it). Then +# on. I also set up mine for parity (but you may not need it). Then # save the setup with ^S. # (cit101e-rv: added empty :te: to suppress a tic warning. --esr) cit101e-rv|Citoh CIT-101e (sets reverse video):\ @@ -8791,7 +8791,7 @@ # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL. # # Part of the long initialization string defines the "DOWN" key to the left -# of the tab key to send an ESC. The real ESC key is positioned way out +# of the tab key to send an ESC. The real ESC key is positioned way out # in right field. # # The termcap won't work in 132 column mode due to the way it it moves the @@ -8814,7 +8814,7 @@ #### Getronics # -# Getronics is a Dutch electronics company that at one time was called +# Getronics is a Dutch electronics company that at one time was called # `Geveke' and made async terminals; but (according to the company itself!) # they've lost all their documentation on the command set. The hardware # documentation suggests the terminals were actually manufactured by a @@ -8866,7 +8866,7 @@ # Vox: (610)-277-8300 # Fax: (610)-275-5739 # Net: support@hds.com -# +# # John Martin <john@hds.com> is their termcap expert. They're mostly out of # the character-terminal business now (1995) and making X terminals. In # particular, the whole `Concept' line described here was discontinued long @@ -8879,29 +8879,29 @@ # # There seem to be a number of different versions of the C108 PROMS # (with bug fixes in its Z-80 program). -# +# # The first one that we had would lock out the keyboard of you # sent lots of short lines (like /usr/dict/words) at 9600 baud. # Try that on your C108 and see if it sends a ^S when you type it. # If so, you have an old version of the PROMs. -# +# # You should configure the C108 to send ^S/^Q before running this. # It is much faster (at 9600 baud) than the c100 because the delays # are not fixed. # new status line display entries for c108-8p: -# :i3: - init str #3 - setup term for status display - -# set programmer mode, select window 2, define window at last +# :i3: - init str #3 - setup term for status display - +# set programmer mode, select window 2, define window at last # line of memory, set bkgnd stat mesg there, select window 0. -# -# :ts: - to status line - select window 2, home cursor, erase to +# +# :ts: - to status line - select window 2, home cursor, erase to # end-of-window, 1/2 bright on, goto(line#0, col#?) -# +# # :fs: - from status line - 1/2 bright off, select window 0 -# -# :ds: - disable status display - set bkgnd status mesg with +# +# :ds: - disable status display - set bkgnd status mesg with # illegal window # -# -# There are probably more function keys that should be added but +# +# There are probably more function keys that should be added but # I don't know what they are. # # No delays needed on c108 because of ^S/^Q handshaking @@ -8929,42 +8929,42 @@ :ti=\EU\Ev 8\001D\Ep\r:tc=c108-8p: # Concept 100: -# These have only window relative cursor addressing, not screen -# relative. To get it to work right here, smcup/rmcup (which -# were invented for the concept) lock you into a one page +# These have only window relative cursor addressing, not screen +# relative. To get it to work right here, smcup/rmcup (which +# were invented for the concept) lock you into a one page # window for screen style programs. -# +# # To get out of the one page window, we use a clever trick: -# we set the window size to zero ("\Ev " in rmcup) which the -# terminal recognizes as an error and resets the window to all +# we set the window size to zero ("\Ev " in rmcup) which the +# terminal recognizes as an error and resets the window to all # of memory. -# +# # This trick works on c100 but does not on c108, sigh. -# -# Some tty drivers use cr3 for concept, others use nl3, hence -# the delays on cr and ind below. This padding is only needed at -# 9600 baud and up. One or the other is commented out depending on +# +# Some tty drivers use cr3 for concept, others use nl3, hence +# the delays on cr and ind below. This padding is only needed at +# 9600 baud and up. One or the other is commented out depending on # local conventions. -# -# 2 ms padding on :te: isn't always enough. 6 works fine. Maybe +# +# 2 ms padding on :te: isn't always enough. 6 works fine. Maybe # less than 6 but more than 2 will work. -# -# Note: can't use function keys f7-f10 because they are -# indistinguishable from arrow keys (!), also, del char and +# +# Note: can't use function keys f7-f10 because they are +# indistinguishable from arrow keys (!), also, del char and # clear eol use xon/xoff so they probably won't work very well. -# -# Also note that we don't define insrt/del char/delline/eop/send -# because they don't transmit unless we reset them - I figured +# +# Also note that we don't define insrt/del char/delline/eop/send +# because they don't transmit unless we reset them - I figured # it was a bad idea to clobber their definitions. -# -# The <mc5> sequence changes the escape character to ^^ so that -# escapes will be passed through to the printer. Only trouble -# is that ^^ won't be - ^^ was chosen to be unlikely. -# Unfortunately, if you're sending raster bits through to be +# +# The <mc5> sequence changes the escape character to ^^ so that +# escapes will be passed through to the printer. Only trouble +# is that ^^ won't be - ^^ was chosen to be unlikely. +# Unfortunately, if you're sending raster bits through to be # plotted, any character you choose will be likely, so we lose. # -# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) -# cannot be # in is2 because it will hang a c100 with no printer +# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) +# cannot be # in is2 because it will hang a c100 with no printer # if sent twice. c100|concept100|concept|c104|c100-4p|hds concept 100:\ :am:bs:eo:mi:ul:xn:\ @@ -9140,7 +9140,7 @@ # #------- flash=\E[8;3!}^G\E[3;3!} #------- flash=\E[?5h$<100>\E[?5l -# There are two ways to flash the screen, both of which have their drawbacks. +# There are two ways to flash the screen, both of which have their drawbacks. # The first is to set the bell mode to video, transmit a bell character, and # set the bell mode back - but to what? There is no way of knowing what the # user's old bell setting was before we messed with it. Worse, the command to @@ -9164,7 +9164,7 @@ # #------- dim= Not available in power on mode. # You have a choice of defining low intensity characters as "half bright" and -# high intensity as "normal", or defining low as "normal" and high as "bold". +# high intensity as "normal", or defining low as "normal" and high as "bold". # No matter which you choose, only one of either "half bright" or "bold" is # available at any time, so taking the time to override the default is # pointless. @@ -9193,7 +9193,7 @@ # [DEL chosen as delimiter, but could be any character] # [implied: ELSE do nothing] # %; ENDIF -# +# #------- rs2= # Not defined since anything it might do could be done faster and easier with # either Meta-Shift-Reset or the main power switch. @@ -9307,10 +9307,10 @@ :i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\ :vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns: -#### Contel Business Systems. -# - -# Contel c300 and c320 terminals. +#### Contel Business Systems. +# + +# Contel c300 and c320 terminals. contel300|contel320|c300|Contel Business Systems C-300 or C-320:\ :am:in:xo:\ :co#80:li#24:sg#1:\ @@ -9332,7 +9332,7 @@ # # DG terminals have function keys that respond to the SHIFT and CTRL keys, # e.g., SHIFT-F1 generates a different code from F1. To number the keys -# sequentially, first the unmodified key codes are listed as F1 through F15. +# sequentially, first the unmodified key codes are listed as F1 through F15. # Then their SHIFT versions are listed as F16 through F30, their CTRL versions # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as # F46 through F60. This is done in the private "includes" below whose names @@ -9425,7 +9425,7 @@ :tc=dgunix+fixed: # Video attributes are coordinated using static variables set by "sgr", then -# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. +# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. # (D=dim, U=underline, B=blink, R=reverse.) dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode:\ :ut:\ @@ -9540,12 +9540,12 @@ :mh=\E[2m:mr=\E[7m:nd=\E[C:nl=\ED:se=\E[m:sf=\E[S:so=\E[7m:\ :sr=\E[T:ta=^I:ue=\E[05:up=\E[A:us=\E[4m: # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official) -# Data General 605x +# Data General 605x # Ought to work for a Model 6242, Type D210 as well as a 605x. # Note that the cursor-down key transmits ^Z. Job control users, beware! # This also matches a posted description of something called a `Dasher 100' -# so there's a dg100 alias here. -# (dg6053: the 4.4BSD file had :le=^H:, :do=^J:, :nd=^S:. -- esr) +# so there's a dg100 alias here. +# (dg6053: the 4.4BSD file had :le=^H:, :do=^J:, :nd=^S:. -- esr) dg6053-old|dg100|data general 6053:\ :am:bs:bw:ul:\ :co#80:li#24:\ @@ -10020,7 +10020,7 @@ #### Datamedia (dm) # -# Datamedia was headquartered in Nashua, New Hampshire until it went +# Datamedia was headquartered in Nashua, New Hampshire until it went # out of business in 1993, but the ID plates on the terminals referred # to the factory in Pennsauken, NJ. The factory was sold to a PCB board # manufacturer which threw out all information about the terminals. @@ -10043,7 +10043,7 @@ :co#80:it#8:li#24:\ :bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\ :kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:nd=^\:sf=^J:ta=^I:up=^_: -# dm2500: this terminal has both :IC: and :im:. Applications using +# dm2500: this terminal has both :IC: and :im:. Applications using # termcap/terminfo directly (rather than through ncurses) might be confused. dm2500|datamedia2500|datamedia 2500:\ :bs:nc:\ @@ -10080,27 +10080,27 @@ # Autorepeat 0=off 1=on # Screen 0=Dark 1=light # Cursor 0=u/l 1=block -# +# # 2 Margin Bell 0=off 1=on # Keyclick 0=off 1=on # Ansi/VT52 0=VT52 1=Ansi # Xon/Xoff 0=Off 1=On -# +# # 3 Shift3 0=Hash 1=UK Pound # Wrap 0=Off 1=On # Newline 0=Off 1=On # Interlace 0=Off 1=On -# +# # 4 Parity 0=Odd 1=Even # Parity 0=Off 1=On # Bits/Char 0=7 1=8 # Power 0=60Hz 1=50Hz -# +# # 5 Line Interface 0=EIA 1=Loop # Aux Interface 0=EIA 1=Loop -# Local Copy 0=Off 1=On +# Local Copy 0=Off 1=On # Spare -# +# # 6 Aux Parity 0=Odd 1=Even # Aux Parity 0=Off 1=On # Aux Bits/Char 0=7 1=8 @@ -10227,7 +10227,7 @@ #### Fluke # -# The f1720a differences from ANSI: no auto margin, destructive +# The f1720a differences from ANSI: no auto margin, destructive # tabs, # of lines, funny highlighting and underlining f1720|f1720a|fluke 1720A:\ :xt:\ @@ -10266,7 +10266,7 @@ # as ^V, the Control Character Quoting capability (^V in insert mode) # is lost! It cannot be remapped in vi because it is necessary to enter # a ^V to to quote the ^V that is being remapped!!! -# +# # f110/f200 users will have to decide whether # to lose the down cursor key or the quoting capability. We will opt # initially for leaving the quoting capability out, since use of VI @@ -10369,58 +10369,58 @@ # so we must have early Superbee2 (Model 600, according to phone conversation # with mfr.). It has proved reliable except for some missing padding # (notably after \EK and <nl> at bottom of screen). -# -# The key idea is that AEP mode is poison for :cm: & that US's in -# the local memory should be avoided like the plague. That means -# that the 2048 character local buffer is used as 25 lines of 80 -# characters, period. No scrolling local memory, folks. It also +# +# The key idea is that AEP mode is poison for :cm: & that US's in +# the local memory should be avoided like the plague. That means +# that the 2048 character local buffer is used as 25 lines of 80 +# characters, period. No scrolling local memory, folks. It also # appears that we cannot use naked INS LINE feature since it uses -# US. The sbi fakes :al: with an 80-space insert that may be too -# slow at low speeds; also spaces get converted to \040 which is +# US. The sbi fakes :al: with an 80-space insert that may be too +# slow at low speeds; also spaces get converted to \040 which is # too long for some programs (not vi). DEL LINE is ok but slow. -# -# The <nl> string is designed for last line of screen ONLY; cup to +# +# The <nl> string is designed for last line of screen ONLY; cup to # 25th line corrects the motion inherent in scrolling to Page 1. -# +# # There is one understood bug. It is that the screen appears to -# pop to a new (blank) page after a :nw:, or leave a half-line -# ellipsis to a quad that is the extra 48 memory locations. The -# data received is dumped into memory but not displayed. Not to -# worry if :cm: is being used; the lines not displayed will be, -# whenever the cursor is moved up there. Since :cm: is addressed -# relative to MEMORY of window, nothing is lost; but beware of +# pop to a new (blank) page after a :nw:, or leave a half-line +# ellipsis to a quad that is the extra 48 memory locations. The +# data received is dumped into memory but not displayed. Not to +# worry if :cm: is being used; the lines not displayed will be, +# whenever the cursor is moved up there. Since :cm: is addressed +# relative to MEMORY of window, nothing is lost; but beware of # relative cursor motion (:up:,:do:,:nd:,:le:). Recommended, # therefore, is setenv MORE -c . -# +# # WARNING: Not all features tested. -# -# Timings are assembled from 3 sources. Some timings may reflect +# +# Timings are assembled from 3 sources. Some timings may reflect # SB2/Model 300 that were used if more conservative. # Tested on a Model 600 at 1200 and 9600 bd. -# -# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly -# placed on the keyboard and useless because of AEP, is made +# +# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly +# placed on the keyboard and useless because of AEP, is made # into a backspace key. In use ESC must be pressed twice (to send) -# and sending ^C must be prefixed by ESC to avoid that weird +# and sending ^C must be prefixed by ESC to avoid that weird # transmit mode associated with ENTER key. -# -# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across -# the screen, then it has dropped into ENTER mode; hit +# +# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across +# the screen, then it has dropped into ENTER mode; hit # RESET--ONLINE--!tset. -# -# As delivered this machine has a FATAL feature that will throw -# it into that strange transmit state (SPOW) if the space bar is -# hit after a CR is received, but before receiving a LF (or a +# +# As delivered this machine has a FATAL feature that will throw +# it into that strange transmit state (SPOW) if the space bar is +# hit after a CR is received, but before receiving a LF (or a # few others). -# -# The circuits MUST be modified to eliminate the SPOW latch. -# This is done by strapping on chip A46 of the I/O board; cut -# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that +# +# The circuits MUST be modified to eliminate the SPOW latch. +# This is done by strapping on chip A46 of the I/O board; cut +# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that # chip. This mod has been checked out on a Mod 600 of Superbee II. -# With this modification absurdly high timings on cr are +# With this modification absurdly high timings on cr are # unnecessary. -# -# NOTE WELL that the rear panel switch should be set to CR/LF, +# +# NOTE WELL that the rear panel switch should be set to CR/LF, # not AEP! # sb1|beehive superbee:\ @@ -10578,7 +10578,7 @@ :kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:nd=^P:se=~^Y:sf=^J:so=~^_:\ :up=~^L: # h1510 assumed to be in sane escape mode. Else use h1500. -# (h1510: early versions of this entry apparently had ":se=\E^_:, +# (h1510: early versions of this entry apparently had ":se=\E^_:, # :so=\E^Y:, but these caps were commented out in 8.3; also, # removed incorrect and overridden ":do=^J:" -- esr) hz1510|hazeltine 1510:\ @@ -10628,7 +10628,7 @@ # characters very fast vi seems not able to keep up and hangs while trying # to insert. That's in insert mode while trying to insert in the middle of # a line. It might be because the Esprit doesn't have insert char and delete -# char as a built in function. Vi has to delete to end of line and then +# char as a built in function. Vi has to delete to end of line and then # redraw the rest of the line. esprit|Hazeltine Esprit I:\ :am:bs:bw:\ @@ -10685,7 +10685,7 @@ :ae=\E>B:as=\E>A:is=\E S:me=\E4@\E>B:rs=\E S:s0=\E>B:\ :..sa=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;:\ :te=\E>B:ti=\E>B:tc=ibm3162: -# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 +# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 # removed kend, knp, kpp -TD ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display:\ :am:bs:mi:ms:\ @@ -10747,7 +10747,7 @@ :vb=\EG: ibm-apl|apl|IBM apl terminal simulator:\ :li#25:tc=dm1520: -# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. +# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) ibmmono|IBM workstation monochrome:\ :es:hs:\ @@ -10882,7 +10882,7 @@ :nw=^M^J:sf=^J:ta=^I:..ts=\Ej\EYI%+ \Eo:tc=ibmega-c: # -# AIX entries. IBM ships these with AIX 3.2.5. +# AIX entries. IBM ships these with AIX 3.2.5. # -- added rc, sc based on manpage -TD aixterm|IBM Aixterm Terminal Emulator:\ :es:hs:\ @@ -10937,7 +10937,7 @@ # The ICL6402 was actually the Kokusai Display System 6402. # The 6404 was the KDS7372 (color version of the 6402). -# +# # ICL6404 control codes follow: # #code function @@ -11246,13 +11246,13 @@ #### Kimtron (abm, kt) # -# Kimtron seems to be history, but as March 1998 these people are still +# Kimtron seems to be history, but as March 1998 these people are still # offering repair services for Kimtron equipment: # # Com/Pair Monitor Service # 1105 N. Cliff Ave. # Sioux Falls, South Dakota 57103 -# +# # WATS voice: 1-800/398-4946 # POTS fax: +1 605/338-8709 # POTS voice: +1 605/338-9650 @@ -11346,7 +11346,7 @@ # This was a line of terminals made by McDonnell-Douglas Information Systems. # These entries come direct from MDIS documentation. I have edited them only # to move primary names of the form p[0-9] * to aliases, and to comment out -# :ae:/:as: in a couple of entries without <acsc> strings. I have +# :ae:/:as: in a couple of entries without <acsc> strings. I have # also removed the change history; the last version indicates this is # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989). # @@ -11706,7 +11706,7 @@ :al=\001:cd=^_:ce=^X:dl=\027:ta=\011:tc=mime3a: # Wed Mar 9 18:53:21 1983 # We run our terminals at 2400 baud, so there might be some timing problems at -# higher speeds. The major improvements in this model are the terminal now +# higher speeds. The major improvements in this model are the terminal now # scrolls down and insert mode works without redrawing the rest of the line # to the right of the cursor. This is done with a bit of a kludge using the # exit graphics mode to get out of insert, but it does not appear to hurt @@ -11748,9 +11748,9 @@ # This entry works for the ergo 4000 with the following setups: # ansi,wraparound,newline disabled, xon/xoff disabled in both # setup a & c. -# +# # WARNING!!! There are multiple versions of ERGO 4000 microcode -# Be advised that very early versions DO NOT WORK RIGHT !! +# Be advised that very early versions DO NOT WORK RIGHT !! # Microterm does have a ROM exchange program- use it or lose big # (ergo400: added <rmam>/<smam> based on the init string -- esr) ergo4000|microterm ergo 4000:\ @@ -11764,7 +11764,7 @@ :ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:me=\E[m:\ :nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:up=\E[A: -#### NCR +#### NCR # # NCR's terminal group was merged with AT&T's when AT&T bought the company. # For what happened to that group, see the ADDS section. @@ -11800,10 +11800,10 @@ # This definition for ViewPoint supports several attributes. This means # that it has magic cookies (extra spaces where the attributes begin). # Some applications do not function well with magic cookies. The System -# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. +# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. # If supporting various attributes is not vital, 'xmc#1' and the extra -# attributes can be removed. -# Mapping to ASCII character set ('acsc' capability) can also be +# attributes can be removed. +# Mapping to ASCII character set ('acsc' capability) can also be # restored if needed. # (untranslatable capabilities removed to fit entry within 1023 bytes) # (sgr removed to fit entry within 1023 bytes) @@ -11955,19 +11955,19 @@ :is=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\ :rs=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\ :tc=ncr260vt300pp: -# This terminfo file contains color capabilities for the Wyse325 emulation of +# This terminfo file contains color capabilities for the Wyse325 emulation of # the NCR 2900/260C color terminal. Because of the structure of the command # (escape sequence) used to set color attributes, one of the fore/background # colors must be preset to a given value. I have set the background color to # black. The user can change this setup by altering the last section of the -# 'setf' definition. The escape sequence to set color attributes is -# ESC d y <foreground_color> <background_color> 1 +# 'setf' definition. The escape sequence to set color attributes is +# ESC d y <foreground_color> <background_color> 1 # In addition, the background color can be changed through the desk accessories. -# The capablitiy 'op' sets colors to green on black (default combination). +# The capablitiy 'op' sets colors to green on black (default combination). # # NOTE: The NCR Unix System Administrator's Shell will not function properly # if the 'pairs' capability is defined. Un-Comment the 'pairs' -# capability and recompile if you wish to have it included. +# capability and recompile if you wish to have it included. # # (untranslatable capabilities removed to fit entry within 1023 bytes) # (sgr removed to fit entry within 1023 bytes) @@ -11997,18 +11997,18 @@ # This definition for Wyse 350 supports several attributes. This means # that it has magic cookies (extra spaces where the attributes begin). # Some applications do not function well with magic cookies. The System -# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. +# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. # If supporting various attributes is not vital, 'xmc#1' and the extra -# attributes can be removed. -# Mapping to ASCII character set ('acsc' capability) can also be +# attributes can be removed. +# Mapping to ASCII character set ('acsc' capability) can also be # restored if needed. # In addition, color capabilities have been added to this file. The drawback, # however, is that the background color has to be black. The foreground colors -# are numbered 0 through 15. +# are numbered 0 through 15. # # NOTE: The NCR Unix System Administrator's Shell does not function properly # with the 'pairs' capability defined as below. If you wish to -# have it included, Un-comment it and recompile (using 'tic'). +# have it included, Un-comment it and recompile (using 'tic'). # # (untranslatable capabilities removed to fit entry within 1023 bytes) # (sgr removed to fit entry within 1023 bytes) @@ -12038,12 +12038,12 @@ # This definition for Wyse 50+ supports several attributes. This means # that it has magic cookies (extra spaces where the attributes begin). # Some applications do not function well with magic cookies. The System -# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. +# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. # If supporting various attributes is not vital, 'xmc#1' and the extra -# attributes can be removed. -# Mapping to ASCII character set ('acsc' capability) can also be +# attributes can be removed. +# Mapping to ASCII character set ('acsc' capability) can also be # restored if needed. -# (ncr260wy50+pp: originally contained commented-out +# (ncr260wy50+pp: originally contained commented-out # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr) # (untranslatable capabilities removed to fit entry within 1023 bytes) # (sgr removed to fit entry within 1023 bytes) @@ -12163,7 +12163,7 @@ # 6 - Don't Send or Do Send Spaces # 7 - Parity Enable # 8 - Stop Bits (One/Two) -# +# # Switch B: # 1 - Upper/Lower Shift # 2 - Typewriter Shift @@ -12172,7 +12172,7 @@ # 5-6 - Carriage Return Without / With Line Feed # 7 - Extended Mode # 8 - Suppress Keyboard Display -# +# # Switch C: # 1 - End of line entry disabled/enabled # 2 - Conversational mode / (Local?) Mode @@ -12182,7 +12182,7 @@ # 6 - (50Hz?) / 60 Hz # 7 - Exit after level zero diagnostics # 8 - RS-232 interface -# +# # Switch D: # 1 - Reverse Channel (yes / no) # 2 - Manual answer (no / yes) @@ -12272,7 +12272,7 @@ :k5=\ERF:k6=\ERG:k7=\ERH:k8=\ERI:k9=\ERJ:k;=\ERK:le=\ED:\ :nd=\EC:sf=^J:st=\E1:up=\EA: # (pe7000m: this had -# rmul=\E!\0, smul=\E!\040, +# rmul=\E!\0, smul=\E!\040, # which is probably wrong, it collides with kf0 pe7000m|perkin elmer 7000 series monochrome monitor:\ :am:\ @@ -12292,8 +12292,8 @@ # Sperry Univac has merged with Burroughs to form Unisys. # -# This entry is for the Sperry UTS30 terminal running the TTY -# utility under control of CP/M Plus 1R1. The functionality +# This entry is for the Sperry UTS30 terminal running the TTY +# utility under control of CP/M Plus 1R1. The functionality # provided is comparable to the DEC vt100. # (uts30: I added <rmam>/<smam> based on the init string -- esr) uts30|sperry uts30 with cp/m@1R1:\ @@ -12384,7 +12384,7 @@ #### Tektronix (tek) # -# Tektronix tubes are graphics terminals. Most of them use modified +# Tektronix tubes are graphics terminals. Most of them use modified # oscilloscope technology incorporating a long-persistence green phosphor, # and support vector graphics on a main screen with an attached "dialogue # area" for interactive text. @@ -12428,14 +12428,14 @@ # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed # on keyboard don't work. You have to hit BREAK twice to get # one break at any speed - this is a documented feature. -# Can't use cursor motion because it's memory relative, and -# because it only works in the workspace, not the monitor. +# Can't use cursor motion because it's memory relative, and +# because it only works in the workspace, not the monitor. # Same for home. Likewise, standout only works in the workspace. -# -# :ce: was commented out since vi and rogue seem to work better +# +# :ce: was commented out since vi and rogue seem to work better # simulating it with lots of spaces! -# -# :al: and :AL: had 145ms of padding, but that slowed down vi's ^U +# +# :al: and :AL: had 145ms of padding, but that slowed down vi's ^U # and didn't seem necessary. # tek4024|tek4025|tek4027|tektronix 4024/4025/4027:\ @@ -12645,14 +12645,14 @@ # look good for screen editing. In the dialog area, you can't move the cursor # off the bottom line. Out of the dialog area, ^K moves it up, but there # is no way to scroll. -# -# Note that there is a floppy for free from Tek that makes the +# +# Note that there is a floppy for free from Tek that makes the # 4112 emulate the vt52 (use the vt52 termcap). There is also # an expected enhancement that will use ANSI standard sequences. -# -# 4112 in non-dialog area pretending to scroll. It really wraps +# +# 4112 in non-dialog area pretending to scroll. It really wraps # but vi is said to work (more or less) in this mode. -# +# # 'vi' works reasonably well with this entry. # otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series:\ @@ -12687,7 +12687,7 @@ tek4113-34|tektronix 4113 color graphics with 34 line dialog area:\ :li#34:\ :is=\EKA1\ELLB2\ELV0\ELV1:tc=tek4113: -# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not +# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . # :vb: needs enough delay to let you see the background color being toggled. tek4113-nd|tektronix 4113 color graphics with no dialog area:\ @@ -12770,9 +12770,9 @@ :te=\E[1;1H\E[0J\E[?6h\E[?1l:\ :ti=\E%\E!1\E[1;32r\E[?6l\E>:ue=\E[m:up=\E[A:us=\E[4m: # Some unknown person wrote: -# I added the is string - straight Unix has ESC ; in the login -# string which sets a ct8500 into monitor mode (aka 4025 snoopy -# mode). The is string here cleans up a few things (but not +# I added the is string - straight Unix has ESC ; in the login +# string which sets a ct8500 into monitor mode (aka 4025 snoopy +# mode). The is string here cleans up a few things (but not # everything). ct8500|tektronix ct8500:\ :am:bw:da:db:\ @@ -12792,7 +12792,7 @@ # Bold, dim, and standout are simulated by colors and thus not allowed # with colors. The tektronix color table is mapped into the RGB color # table by setf/setb. All colors are reset to factory specifications by oc. -# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the +# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- # interval then maps into pre-defined value. # (untranslatable capabilities removed to fit entry within 1023 bytes) @@ -12963,7 +12963,7 @@ #### Apple II # -# Apple II firmware console first, then various 80-column cards and +# Apple II firmware console first, then various 80-column cards and # terminal emulators. For two cents I'd toss all these in the UFO file # along with the 40-column apple entries. # @@ -12971,7 +12971,7 @@ # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL # 'it#8' tells UNIX that you have tabs every 8 columns. This is a # function of TIC, not the firmware. -# The clear key on a IIgs will do something like clear-screen, +# The clear key on a IIgs will do something like clear-screen, # depending on what you're in. appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface:\ :am:bs:bw:eo:ms:\ @@ -13173,20 +13173,20 @@ # line. Please note that non-ASCII characters don't work right in the # status line, since Terminal.app incorrectly interprets their Unicode # codepoints as MacRoman codepoints. -# +# # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to # "nsterm" to comply with the name length and case conventions and # limitations of various software packages [notably Solaris terminfo # and UNIX.] A single Apple_Terminal alias is retained for # backwards-compatbility. -# +# # * Added function key support (F1-F4). These only work in Terminal.app # version 51, hopefully the capabilities won't cause problems for people # using version 41. -# +# # * Added "full color" (-c) entries which support the 16-color mode in # version 51. -# +# # * By default, version 51 uses UTF-8 encoding with broken altcharset # support, so "ASCII" (-7) entries without altcharset support were # added. @@ -13719,7 +13719,7 @@ :l0=f10:le=\ED:me=\Eq:nd=\EC:nw=^M^J:r1=\Ez_\Eb@\EcA:\ :rc=\Ek:sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:te=:ti=\Ee:\ :up=\EA:ve=\Ee:vi=\Ef: - + #### Commodore Business Machines # # Formerly located in West Chester, PA; went spectacularly bust in 1994 @@ -13840,16 +13840,16 @@ #### Osborne # # Thu Jul 7 03:55:16 1983 -# -# As an aside, be careful; it may sound like an anomaly on the -# Osborne, but with the 80-column upgrade, it's too easy to +# +# As an aside, be careful; it may sound like an anomaly on the +# Osborne, but with the 80-column upgrade, it's too easy to # enter lines >80 columns! -# +# # I've already had several comments... -# The Osborne-1 with the 80-col option is capable of being -# 52, 80, or 104 characters wide; default to 80 for compatibility +# The Osborne-1 with the 80-col option is capable of being +# 52, 80, or 104 characters wide; default to 80 for compatibility # with most systems. -# +# # The tab is destructive on the Ozzie; make sure to 'stty -tabs'. osborne-w|osborne1-w|osborne I in 104-column mode:\ :ms:ul:xt:\ @@ -13886,7 +13886,7 @@ # Memory-segmentation limits and a strong tendency to look like V7 long after # it was obsolete made all three pretty lame. Venix croaked early. Coherent # and Minix were ported to 32-bit Intel boxes, only to be run over by a -# steamroller named `Linux' (which, to be fair, traces some lineage to Minix). +# steamroller named `Linux' (which, to be fair, traces some lineage to Minix). # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There # are also, I'm told, Minix ports that ran on Amiga and Atari machines and # even as single processes under SunOS and the Macintosh OS. @@ -13938,7 +13938,7 @@ :sr=\EI:ta=^I:up=\EA: # According to the Venix 1.1 manual, the PC console is similar -# to a DEC vt52. Differences seem to be (1) arrow keys send +# to a DEC vt52. Differences seem to be (1) arrow keys send # different strings, (2) enhanced standout, (3) added insert/delete line. # Note in particular that it doesn't have automatic margins. # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they @@ -13955,11 +13955,11 @@ # # The MAI Basic Four computer was obsolete at the end of the 1980s. -# It may be used as a terminal by putting it in "line" mode as seen on +# It may be used as a terminal by putting it in "line" mode as seen on # one of the status lines. -# Initialization is similar to CIT80. :is: will set ANSI mode for you. +# Initialization is similar to CIT80. :is: will set ANSI mode for you. # Hardware tabs set by :if: at 8-spacing. Auto line wrap causes glitches so -# wrap mode is reset by :vs:. Using :sf:=\E[S caused errors so I +# wrap mode is reset by :vs:. Using :sf:=\E[S caused errors so I # used \ED instead. # From: bf347@lafn.org (David Lawyer), 28 Jun 1997 mai|basic4|MAI Basic Four in ansi mode:\ @@ -13979,7 +13979,7 @@ # # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote: # The Basis 108 was a Apple II clone, manufactured by the "Basis -# Mikrocomputer GmbH" in Munster, Germany (the company still exists today, +# Mikrocomputer GmbH" in Munster, Germany (the company still exists today, # about 1,5 km from where I live, but doesn't build own computers any # more). A Basis 108 featured a really heavy (cast aluminium?) case, was # equipped with one or two 5.25" disk drives, had a monochrome and colour @@ -13999,7 +13999,7 @@ megatek|pegasus workstation terminal emulator:\ :am:os:\ :co#83:li#60: -# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived +# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived # interface (pre-Macintosh by several years) that went nowhere. xerox820|x820|Xerox 820:\ :am:\ @@ -14090,7 +14090,7 @@ #### Bell Labs blit terminals # -# These were AT&T's official entries. The 5620 FAQ maintained by +# These were AT&T's official entries. The 5620 FAQ maintained by # David Breneman <daveb@dgtl.com> has this to say: # # Actually, in the beginning was the Jerq, and the Jerq was white with a @@ -14149,17 +14149,17 @@ # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt # Beranek and Neuman) sold at most a few hundred of them to the real # world. DOD may have bought more... -# - -# Entries for the BitGraph terminals. The problem -# with scrolling in vi can only be fixed by getting BBN to put -# smarter scroll logic in the terminal or changing vi or padding +# + +# Entries for the BitGraph terminals. The problem +# with scrolling in vi can only be fixed by getting BBN to put +# smarter scroll logic in the terminal or changing vi or padding # scrolls with about 500 ms delay. -# -# I always thought the problem was related to the terminal -# counting newlines in its input buffer before scrolling and -# then moving the screen that much. Then vi comes along and -# paints lines in on the bottom line of the screen, so you get +# +# I always thought the problem was related to the terminal +# counting newlines in its input buffer before scrolling and +# then moving the screen that much. Then vi comes along and +# paints lines in on the bottom line of the screen, so you get # this big white gap. bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video):\ @@ -14302,17 +14302,17 @@ # Copyright (c) 1989 BULL SA #--------------------------------------------------------------------------- # This entry is used for terminals with vt320 emulation mode -# and following set-up : +# and following set-up : # 8 bit ISO Latin Character Set (ISO 8859-1), -# 7 bit Control Characters, -# 80 columns screen. +# 7 bit Control Characters, +# 80 columns screen. # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300) # They are used in string capabilities with vt220-320 emulation mode. # In the following DEC definitions, two kinds of terminfo databases are # provided : -# 1. the first with Command Sequence Introducer starting with escape +# 1. the first with Command Sequence Introducer starting with escape # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode. -# 2. the second with Command Sequence Introducer starting with escape +# 2. the second with Command Sequence Introducer starting with escape # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B. # Soft Terminal Reset esc [ ! p # RIS (erases screen): esc c @@ -14347,11 +14347,11 @@ # RM DECAWM auto right margin: esc [ ? 7 l # SM DECARM auto repeat: esc [ ? 8 h # RM DECARM auto repeat: esc [ ? 8 l -# DECSASD Select active main: esc [ 0 $ } -# DECSASD Select active status: esc [ 1 $ } -# DECSSDT Select status none: esc [ 0 $ ~ -# DECSSDT Select status indic.: esc [ 1 $ ~ -# DECSSDT Select status host-wr: esc [ 2 $ ~ +# DECSASD Select active main: esc [ 0 $ } +# DECSASD Select active status: esc [ 1 $ } +# DECSSDT Select status none: esc [ 0 $ ~ +# DECSSDT Select status indic.: esc [ 1 $ ~ +# DECSSDT Select status host-wr: esc [ 2 $ ~ # SM DECTCEM Visible cursor: esc [ ? 2 5 h # RM DECTCEM Invisible cursor: esc [ ? 2 5 l # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h @@ -14407,10 +14407,10 @@ :rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300: # This entry is used for terminals with vt320 emulation mode -# and following set-up : +# and following set-up : # 8 bit ISO Latin Character Set (ISO 8859-1), # 8 bit Control Characters, (CSI coded as x9B for ESC [) -# 80 columns screen. +# 80 columns screen. # Soft Terminal Reset csi ! p # RIS (erases screen): esc c # DECKPNM numeric keypad mode: esc > @@ -14444,11 +14444,11 @@ # RM DECAWM auto right margin: csi ? 7 l # SM DECARM auto repeat: csi ? 8 h # RM DECARM auto repeat: csi ? 8 l -# DECSASD Select active main: csi 0 $ } -# DECSASD Select active status: csi 1 $ } -# DECSSDT Select status none: csi 0 $ ~ -# DECSSDT Select status indic.: csi 1 $ ~ -# DECSSDT Select status host-wr: csi 2 $ ~ +# DECSASD Select active main: csi 0 $ } +# DECSASD Select active status: csi 1 $ } +# DECSSDT Select status none: csi 0 $ ~ +# DECSSDT Select status indic.: csi 1 $ ~ +# DECSSDT Select status host-wr: csi 2 $ ~ # SM DECTCEM Visible cursor: csi ? 2 5 h # RM DECTCEM Invisible cursor: csi ? 2 5 l # SM DECNCRM 7 bits NCR set: csi ? 4 2 h @@ -14498,10 +14498,10 @@ :rs=\233?3h:vb=\233?5l\233?5h:tc=bq300-8: # This entry is used for terminals with vt320 emulation mode -# a 102 keys keyboard (PC scancode !) and following set-up : +# a 102 keys keyboard (PC scancode !) and following set-up : # 8 bit ISO Latin Character Set (ISO 8859-1), -# 7 bit Control Characters, -# 80 columns screen. +# 7 bit Control Characters, +# 80 columns screen. bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns:\ :%0@:%1@:*6@:@0@:@7=\E[4~:F1=\E[29~:F2=\E[31~:F3@:F4@:F5@:F6@:\ :F7@:F8@:F9@:FA@:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\ @@ -14520,8 +14520,8 @@ :is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\ :rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-pc: # 8 bit ISO Latin Character Set (ISO 8859-1), -# 8 bit Control Characters, -# 80 columns screen. +# 8 bit Control Characters, +# 80 columns screen. bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns:\ :%0@:%1@:*6@:@0@:@7=\2334~:F1=\23329~:F2=\23331~:F3@:F4@:F5@:\ :F6@:F7@:F8@:F9@:FA@:k1=\23317~:k2=\23318~:k3=\23319~:\ @@ -14629,13 +14629,13 @@ #### Chromatics # -# I have put the long strings in :ti:/:te:. Ti sets up a window -# that is smaller than the screen, and puts up a warning message -# outside the window. Te erases the warning message, puts the +# I have put the long strings in :ti:/:te:. Ti sets up a window +# that is smaller than the screen, and puts up a warning message +# outside the window. Te erases the warning message, puts the # window back to be the whole screen, and puts the cursor at just -# below the small window. I defined :ve: and :vi: to really turn -# the cursor on and off, but I have taken this out since I don't -# like the cursor being turned off when vi exits. +# below the small window. I defined :ve: and :vi: to really turn +# the cursor on and off, but I have taken this out since I don't +# like the cursor being turned off when vi exits. cg7900|chromatics|chromatics 7900:\ :am:\ :co#80:li#40:\ @@ -14688,17 +14688,17 @@ :sf=^J:up=^Z: # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997 -# The Datapoint 8242 Workstation was sold at least between 1985 -# and 1989. To make the terminal work with this entry, press -# CONTROL-INT-INT to take the terminal off-line, and type (opt). -# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO -# CR/LF off. Use control-shift-[] as escape key, control-I as tab, +# The Datapoint 8242 Workstation was sold at least between 1985 +# and 1989. To make the terminal work with this entry, press +# CONTROL-INT-INT to take the terminal off-line, and type (opt). +# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO +# CR/LF off. Use control-shift-[] as escape key, control-I as tab, # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in # fact unusable because the strings sent by the terminal conflict # with other keys). # The terminal is capable of displaying "box draw" characters. -# For each graphic character you must send 2 ESC's (\E\E) followed -# by a control character as follows: +# For each graphic character you must send 2 ESC's (\E\E) followed +# by a control character as follows: # character meaning # ========= ======= # ctrl-E top tee @@ -14712,8 +14712,8 @@ # ctrl-M bottom right corner # ctrl-N horizontal line # ctrl-O vertical line -# Unfortunately this cannot be fitted into the termcap/terminfo -# description scheme. +# Unfortunately this cannot be fitted into the termcap/terminfo +# description scheme. dp8242|datapoint 8242:\ :ms:\ :co#80:li#25:\ @@ -14732,7 +14732,7 @@ # # These entries are DEC's official terminfos for its older terminals. # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support -# Engineering for more information. Updated terminfos and termcaps +# Engineering for more information. Updated terminfos and termcaps # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. # @@ -14808,7 +14808,7 @@ # \E[4g clear vertical tab stops # \E> disable alternate keypad mode (so it transmits numbers!) # \E[%i%p1%du set tab stop at column %d (origin == 1) -# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is +# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is # a tab stop) # # The dw3 does standout with wide characters. @@ -14900,22 +14900,22 @@ # # S401 # 0-3 = baud rate as follows: -# +# # 3 2 1 0 -# --- --- --- --- +# --- --- --- --- # 0 0 1 1 300 baud # 0 1 0 1 1200 baud # 1 0 0 0 2400 baud # 1 0 1 0 4800 baud # 1 1 0 0 9600 baud # 1 1 0 1 19.2K baud -# +# # 4 = parity (0 = no parity) # 5 = even parity (0 = odd parity) # 6 = stick parity (0 = normal parity) # 7 = full duplex (0 = half duplex) -# -# S402 +# +# S402 # 0 = block cursor (0 = underscore cursor) # 1 = no key click (0 = keyclick) # 2 = wrap at end of line (0 = no wrap) @@ -14924,7 +14924,7 @@ # 5 = ANSI mode (0 = VT52 mode) # 6 = keypad shifted (0 = keypad unshifted) # 7 = 50Hz refresh (1 = 60Hz refresh) -# +# # Factory Default settings are as follows: # 7 6 5 4 3 2 1 0 # S401 1 0 0 0 1 1 0 0 @@ -14948,14 +14948,14 @@ :ke=\Eu:ks=\Et:tc=h19-u: # (h19: merged in :ip: from BSDI hp19-e entry>; # also added empty <acsc> to suppress a tic warning --esr) -# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998 +# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998 # Tim tells us that: # I have an old Zenith-19 terminal at home that still gets a lot of use. # This terminal suffers from the same famous insert-mode padding lossage # that has been acknowledged for the Z29 terminal. Emacs is nearly # unusable on this box, since even a half-scroll up or down the window # causes flaming terminal death. -# +# # On the Z19, the only way I have found around this problem is to remove # the :al: and :dl: entries entirely. No amount of extra padding will # help (I have tried up to 20000). Removing :al=\EL$: and :dl=\EM$: @@ -14985,37 +14985,37 @@ # it needs more padding. It especially loses if a program attempts # to put the Z29 into insert mode and insert text at 9600 baud. It # even loses worse if the program attempts to insert tabs at 9600 -# baud. Adding padding to text that is inserted loses because in +# baud. Adding padding to text that is inserted loses because in # order to make the Z29 not die, one must add so much padding that -# whenever the program tries to use insert mode, the effective +# whenever the program tries to use insert mode, the effective # rate is about 110 baud. -# -# What program would want to put the terminal into insert mode -# and shove stuff at it at 9600 baud you ask? -# -# Emacs. Emacs seems to want to do the mathematically optimal +# +# What program would want to put the terminal into insert mode +# and shove stuff at it at 9600 baud you ask? +# +# Emacs. Emacs seems to want to do the mathematically optimal # thing in doing a redisplay rather than the practical thing. -# When it is about to output a line on top of a line that is -# already on the screen, instead of just killing to the end of -# the line and outputting the new line, it compares the old line -# and the new line and if there are any similarities, it -# constructs the new line by deleting the text on the old line +# When it is about to output a line on top of a line that is +# already on the screen, instead of just killing to the end of +# the line and outputting the new line, it compares the old line +# and the new line and if there are any similarities, it +# constructs the new line by deleting the text on the old line # on the terminal that is already there and then inserting new -# text into the line to transform it into the new line that is +# text into the line to transform it into the new line that is # to be displayed. The Z29 does not react kindly to this. -# +# # But don't cry for too long.... There is a solution. You can make # a termcap entry for the Z29 that says the Z29 has no insert mode. -# Then Emacs cannot use it. "Oh, no, but now inserting into a +# Then Emacs cannot use it. "Oh, no, but now inserting into a # line will be really slow", you say. Well there is a sort of a -# solution to that too. There is an insert character option on -# the Z29 that will insert one character. Unfortunately, it -# involves putting the terminal into ansi mode, inserting the -# character, and changing it back to H19 mode. All this takes 12 -# characters. Pretty expensive to insert one character, but it -# works. Either Emacs doesn't try to use its inserting hack when -# it's only given an insert character ability or the Z29 doesn't -# require padding with this (the former is probably more likely, +# solution to that too. There is an insert character option on +# the Z29 that will insert one character. Unfortunately, it +# involves putting the terminal into ansi mode, inserting the +# character, and changing it back to H19 mode. All this takes 12 +# characters. Pretty expensive to insert one character, but it +# works. Either Emacs doesn't try to use its inserting hack when +# it's only given an insert character ability or the Z29 doesn't +# require padding with this (the former is probably more likely, # but I haven't checked it out). # (z29: added empty <acsc> to suppress a tic warning, merged in # status line capabilities from BRL entry --esr) @@ -15113,9 +15113,9 @@ #### IMS International (ims) # -# There was a company called IMS International located in Carson City, +# There was a company called IMS International located in Carson City, # Nevada, that flourished from the mid-70s to mid-80s. They made S-100 -# bus/Z80 hardware and a line of terminals called Ultimas. +# bus/Z80 hardware and a line of terminals called Ultimas. # # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985 @@ -15153,7 +15153,7 @@ :bc=^U:bl=^G:cd=\E~k<10*>:ce=\E~K:cl=\014:cm=\EY%+ %+ :\ :cr=^M:do=^J:kd=^J:kl=^U:kr=^F:ku=^K:le=^H:nd=^F:sf=^J:ta=^I:\ :te=^L:ti=^L:up=^K: -# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, +# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM, # and the reverse is actually true. Try it. -- esr) intertube|intertec|Intertec InterTube:\ @@ -15182,12 +15182,12 @@ # # The Graphos III was a color graphics terminal from Ithaca Intersystems. -# These entries were written (originally in termcap syntax) by Brian Yandell -# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the +# These entries were written (originally in termcap syntax) by Brian Yandell +# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the # University of Wisconsin. -# (graphos: removed obsolete and syntactically incorrect :kn=4:, -# removed :if=/usr/share/tabset/init.graphos: and +# (graphos: removed obsolete and syntactically incorrect :kn=4:, +# removed :if=/usr/share/tabset/init.graphos: and # <rf=/usr/share/tabset/init.graphos> no such file & no :st: -- esr) graphos|graphos III:\ :am:mi:\ @@ -15215,7 +15215,7 @@ # Vox: (617)-890-5796. # # However, if you call that number today you'll get an insurance company. -# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated +# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated # 26 Feb 1997 that says: # # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been @@ -15266,7 +15266,7 @@ :us=\E[4m:vb=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q: #### Morrow Designs -# +# # This was George Morrow's company. They started in the late 1970s making # S100-bus machines. They used to be reachable at: # @@ -15277,7 +15277,7 @@ # but they're long gone now (1995). # -# The mt70 terminal was shipped with the Morrow MD-3 microcomputer. +# The mt70 terminal was shipped with the Morrow MD-3 microcomputer. # Jeff's specimen was dated June 1984. # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995 mt70|mt-70|Morrow MD-70; native Morrow mode:\ @@ -15417,17 +15417,17 @@ # consisted of a circle with a slightly smaller 15 degree (approx.) # wedge with rounded corners inside it. The color was sort of # a metallic gold/yellow. -# +# # If I had been more of a beer drinker it might have been obvious # to me, but it took a clue from their service department to make # me exclaim, "Of course!" The circular object was the top of # a beer can (the old removable pop-top style) and "Soroc" was an # anagram for "Coors". -# +# # I can just imagine the founders of the company sitting around # one evening, tossing back a few and trying to decide what to # call their new company and what to use for a logo. -# +# # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) soroc120|iq120|soroc|soroc iq120:\ @@ -15444,7 +15444,7 @@ #### Southwest Technical Products # -# These guys made an early personal micro called the M6800. +# These guys made an early personal micro called the M6800. # The ct82 was probably its console terminal. # @@ -15483,7 +15483,7 @@ # CRT). It wasn't much different from the KTM-2 hardware-wise, but the # control and escape sequences are very different. The KTM-3 was always # real broken, at least according to the folks I've talked to about it. -# +# # The padding in the entry is probably off--these terminals were very # slow (it takes like 100ms for the KTM-2 to clear the screen...) And # anyone with any sanity replaced the ROMs with something that provided @@ -15491,7 +15491,7 @@ # obviously very primitive... oh, you could get an upgraded ROM from # Synertek for some incredible amount of money, but what hacker with an # EPROM burner would do that? :) -# +# # Sorry I don't have any contact info; I believe they were located in # Sunnyvale, and I'm fairly sure they are still manufacturing ICs # (they've gone to ASICs and FPGAs), but I doubt they're in the computer @@ -15725,7 +15725,7 @@ # # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally -# had just :so:=\EG6 which I think means standout was supposed to be +# had just :so:=\EG6 which I think means standout was supposed to be # dim-reverse using ADM12-style attributes. ADM12 :us:/:ue: and # <invis> might work-- esr) zen30|z30|zentec 30:\ @@ -15761,7 +15761,7 @@ #### Apollo consoles # -# Apollo got bought by Hewlett-Packard. The Apollo workstations are +# Apollo got bought by Hewlett-Packard. The Apollo workstations are # labeled HP700s now. # @@ -15844,7 +15844,7 @@ # to force both magic cookie glitches off. Once upon a time, I # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are # function keys; thus the "Al" value for HM was certainly an error. I renamed -# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC. +# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC. # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr) @@ -15890,7 +15890,7 @@ # # CTRM terminal emulator -# 1. underlining is not allowed with colors: first, is is simulated by +# 1. underlining is not allowed with colors: first, is is simulated by # black on white, second, it disables background color manipulations. # 2. BLINKING, REVERSE and BOLD are allowed with colors, # so we have to save their status in the static registers A, B and H @@ -15898,7 +15898,7 @@ # (because any color change turns off ALL attributes) # 3. :md: and :mr: sequences alternate modes, # rather then simply entering them. Thus we have to check the -# static register B and H to determine the status, before sending the +# static register B and H to determine the status, before sending the # escape sequence. # 4. :me: now must set the status of all 3 register (A,B,H) to zero # and then reset colors @@ -16022,7 +16022,7 @@ # (diablo1640: removed :if=/usr/share/tabset/xerox1730:, no such file -- esr) diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640:\ :bl=^G:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620: -# (diablo1640-lm: removed :if=/usr/share/tabset/xerox1730-lm:, no such +# (diablo1640-lm: removed :if=/usr/share/tabset/xerox1730-lm:, no such # file -- esr) diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin:\ :co#124:\ @@ -16031,7 +16031,7 @@ :tc=diablo1640-lm: # DTC 382 with VDU. Has no :cd: so we fake it with :ce:. Standout # :so=^P\s\002^PF: works but won't go away without dynamite :se=^P\s\0:. -# The terminal has tabs, but I'm getting tired of fighting the braindamage. +# The terminal has tabs, but I'm getting tired of fighting the braindamage. # If no tab is set or the terminal's in a bad mood, it glitches the screen # around all of memory. Note that return puts a blank ("a return character") # in the space the cursor was at, so we use ^P return (and thus ^P newline for @@ -16089,7 +16089,7 @@ #### Miscellaneous obsolete terminals, manufacturers unknown # -# If you have any information about these (like, a manufacturer's name, +# If you have any information about these (like, a manufacturer's name, # and a date on the serial-number plate) please send it! cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars:\ @@ -16206,7 +16206,7 @@ # # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998: # I had a couple of scopes (3221) like this once where I used to work, around -# the 1987 time frame if memory serves me correctly. These scopes were made +# the 1987 time frame if memory serves me correctly. These scopes were made # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222 @@ -16262,18 +16262,18 @@ # receive the document in due course. Don't expect an email acknowledgement. # # Related standards include "X3.4-1977: American National Standard Code for -# Information Interchange" (the ASCII standard) and "X3.41.1974: +# Information Interchange" (the ASCII standard) and "X3.41.1974: # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of # American National Standard for Information Interchange." I believe (but # am not certain) that these are effectively identical to ECMA-6 and ECMA-35 -# respectively. +# respectively. # #### VT100/ANSI/ECMA-48 # # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals # and ECMA-48 Control Functions for Coded Character Sets. -# +# # Much of the content of this comment is adapted from a table prepared by # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences, # discussion of some terminfo-related issues, and updates to capture ECMA-48 @@ -16444,13 +16444,13 @@ # VPR Vert. Position Relative \E [ Pn e 1 FE - (R) # VT Vertical Tabulation * ^K - FE - # VTS Vertical Tabulation Set \E J - FE - -# +# # --------------------------------------------------------------------------- # # Notes: # -# Some control characters are listed in the ECMA-48 standard without -# being assigned functions relevant to terminal control there (they +# Some control characters are listed in the ECMA-48 standard without +# being assigned functions relevant to terminal control there (they # referred to other standards such as ISO 1745 or ECMA-35). They are listed # here anyway for completeness. # @@ -16468,11 +16468,11 @@ # # (D) terminfo (nel) is usually \r\n rather than ANSI \EE. # -# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR +# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR # abbreviation. -# +# # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear -# char tab, 3 = clear line tab, 4 = clear all char tabs on current line, +# char tab, 3 = clear line tab, 4 = clear all char tabs on current line, # 5 = clear all char tabs, 6 = clear all line tabs. # # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept @@ -16488,7 +16488,7 @@ # # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end, # 1 = clear from beginning, 2 = clear. -# +# # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation. # # (L) The GSM parameters are vertical and horizontal parameters to scale by. @@ -16525,7 +16525,7 @@ # # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer -# from secondary aux device, 4 = stop relay to primary aux device, 5 = +# from secondary aux device, 4 = stop relay to primary aux device, 5 = # start relay to primary aux device, 6 = stop relay to secondary aux device, # 7 = start relay to secondary aux device. # @@ -16537,13 +16537,13 @@ # # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation. # -# (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM), -# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM), +# (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM), +# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM), # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM), # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional -# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM), +# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM), # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM), -# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM), +# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM), # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed @@ -16560,68 +16560,68 @@ # abbreviation. # # --------------------------------------------------------------------------- -# +# # Abbreviations: # # Intro an Introducer of some kind of defined sequence; the normal 7-bit # X3.64 Control Sequence Introducer is the two characters "Escape [" -# +# # Delim a Delimiter -# +# # x/y identifies a character by position in the ASCII table (column/row) -# +# # eF editor function (see explanation) -# +# # FE format effector (see explanation) # # F is a Final character in # an Escape sequence (F from 3/0 to 7/14 in the ASCII table) # a control sequence (F from 4/0 to 7/14) -# +# # Gs is a graphic character appearing in strings (Gs ranges from # 2/0 to 7/14) in the ASCII table -# +# # Ce is a control represented as a single bit combination in the C1 set # of controls in an 8-bit character set -# +# # C0 the familiar set of 7-bit ASCII control characters -# +# # C1 roughly, the set of control chars available only in 8-bit systems. # This is too complicated to explain fully here, so read Jim Fleming's # article in the February 1983 BYTE, especially pages 214 through 224. -# +# # Fe is a Final character of a 2-character Escape sequence that has an # equivalent representation in an 8-bit environment as a Ce-type # (Fe ranges from 4/0 to 5/15) -# +# # Fs is a Final character of a 2-character Escape sequence that is # standardized internationally with identical representation in 7-bit # and 8-bit environments and is independent of the currently # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14) -# +# # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the # ASCII table -# +# # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII # table -# +# # Pn is a numeric parameter in a control sequence, a string of zero or # more characters ranging from 3/0 to 3/9 in the ASCII table -# +# # Ps is a variable number of selective parameters in a control sequence # with each selective parameter separated from the other by the code # 3/11 (which usually represents a semicolon); Ps ranges from # 3/0 to 3/9 and includes 3/11 # # * Not relevant to terminal control, listed for completeness only. -# +# # Format Effectors versus Editor Functions -# +# # A format effector specifies how following output is to be displayed. # An editor function allows you to modify the display. Informally # format effectors may be destructive; format effectors should not be. -# -# For instance, a format effector that moves the "active position" (the +# +# For instance, a format effector that moves the "active position" (the # cursor or equivalent) one space to the left would be useful when you want to # create an overstrike, a compound character made of two standard characters # overlaid. Control-H, the Backspace character, is actually supposed to be a @@ -16635,16 +16635,16 @@ # return, linefeed, formfeed, etc., are defined as format effectors. # # NOTES ON THE DEC VT100 IMPLEMENTATION -# +# # Control sequences implemented in the VT100 are as follows: -# +# # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND, # LNM, NEL, RI, RIS, RM, SGR, SM, TBC -# +# # plus several private DEC commands. -# +# # Erasing parts of the display (EL and ED) in the VT100 is performed thus: -# +# # Erase from cursor to end of line Esc [ 0 K or Esc [ K # Erase from beginning of line to cursor Esc [ 1 K # Erase line containing cursor Esc [ 2 K @@ -16654,32 +16654,32 @@ # # Some brain-damaged terminal/emulators respond to Esc [ J as if it were # Esc [ 2 J, but this is wrong; the default is 0. -# +# # The VT100 responds to receiving the DA (Device Attributes) control -# +# # Esc [ c (or Esc [ 0 c) -# +# # by transmitting the sequence -# +# # Esc [ ? l ; Ps c -# +# # where Ps is a character that describes installed options. -# +# # The VT100's cursor location can be read with the DSR (Device Status # Report) control -# +# # Esc [ 6 n -# +# # The VT100 reports by transmitting the CPR sequence -# +# # Esc [ Pl ; Pc R -# +# # where Pl is the line number and Pc is the column number (in decimal). -# +# # The specification for the DEC VT100 is document EK-VT100-UG-003. #### ANSI.SYS -# +# # Here is a description of the color and attribute controls supported in the # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI # terminal emulators for Intel boxes obey these. They are a proper subset @@ -16716,7 +16716,7 @@ #### Intel Binary Compatibility Standard # -# For comparison, here are the capabilities implied by the Intel Binary +# For comparison, here are the capabilities implied by the Intel Binary # Compatibility Standard for UNIX systems (Intel order number 468366-001). # These recommendations are optional. IBCS2 allows the leading escape to # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with @@ -16779,7 +16779,7 @@ # CSI c (clear) clear screen # # The lack of any specification for attributes in SGR (among other things) -# makes this a wretchedly weak standard. The table above is literally +# makes this a wretchedly weak standard. The table above is literally # everything iBSC2 has to say about terminal escape sequences; there is # no further discussion of their meaning or how to set the parameters # in these sequences at all. @@ -16838,12 +16838,12 @@ # # Finally, XENIX also used the following forms-drawing capabilities: # -# single double type ASCII approximation +# single double type ASCII approximation # ------ ------ ------------- ------------------- # GV Gv vertical line | # GH Gv horizontal line - _ # G1 G5 top right corner _ | -# G2 G6 top left corner | +# G2 G6 top left corner | # G3 G7 bottom left corner |_ # G4 G8 bottom right corner _| # GD Gd down-tick character T @@ -16892,7 +16892,7 @@ # correspond to acsc chars, here is the mapping: # # box1[0] = ACS_ULCORNER -# box1[1] = ACS_HLINE +# box1[1] = ACS_HLINE # box1[2] = ACS_URCORNER # box1[3] = ACS_VLINE # box1[4] = ACS_LRCORNER @@ -16930,7 +16930,7 @@ # project. # # This file contains all the capability information present in John Kunze's -# last version of the termcap master file, except as noted in the change +# last version of the termcap master file, except as noted in the change # comments at end of file. Some information about very ancient obsolete # capabilities has been moved to comments. Some all-numeric names of older # terminals have been retired. @@ -16998,7 +16998,7 @@ # * Replaced the translated BBN Bitgraph entries with purpose-built # ones from AT&T's SVr3. # * Replaced the AT&T entries with AT&T's official terminfos. -# * Added teleray 16, vc415, cops10. +# * Added teleray 16, vc415, cops10. # * Merged in many individual capabilities from SCO terminfo files. # 9.4.3 (Mon Mar 13 02:37:53 EST 1995): # * Typo fixes. @@ -17022,7 +17022,7 @@ # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995) # * Added apple (Videx card), adm1a, oadm31. # * Fixed malformed ampex csr. -# * Fixed act4, cyb110; they had old-style prefix padding left in. +# * Fixed act4, cyb110; they had old-style prefix padding left in. # * Changed mandatory to advisory padding in many entries. # * Replaced HP entries up to hpsub with purpose-built ones. # * Blank rmir/smir/rmdc/smdc capabilities removed. @@ -17052,7 +17052,7 @@ # * Comment fixes from David MacKenzie. # * Added the new BSDI pc3 entry. # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995) -# * A change in the tic -C logic now ensures that all entries in +# * A change in the tic -C logic now ensures that all entries in # the termcap translation will fit in < 1024 bytes. # * Added `bobcat' and `gator' HP consoles and the Nu machine entries # from GNU termcap file. This merges in all their local information. @@ -17103,7 +17103,7 @@ # * Added csr capability to linux entry. # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG. # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators. -# * Some commented-out caps in long entries come back in, my code +# * Some commented-out caps in long entries come back in, my code # for computing string-table lengths had a bug in it. # * pcansi series modified to fit comm-program reality better. # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995): @@ -17140,7 +17140,7 @@ # * fixed cup in adm22 entry and parametrized strings in vt320-k3. # * added it#8 to entries that used to have :pt: -- tvi912, vi200, # ampex80, -# * Translate all home=\E[;H capabilities to home=\E[H, they're +# * Translate all home=\E[;H capabilities to home=\E[H, they're # equivalent. # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of # vt100 and ANSI-like terminals. @@ -17149,7 +17149,7 @@ # does this now, too. # * fviewpoint is gone, it duplicated screwpoint. # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c, -# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, +# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW. # The UW vi50 replaces the old one, which becomes vi50adm, # * No more embedded commas in name fields. @@ -17174,7 +17174,7 @@ # * Hand-translate more XENIX capabilities. # * Added hpterm entry for HP's X terminal emulator. # * Added aixterm entries. -# * Shortened four names so everything fits in 14 chars. +# * Shortened four names so everything fits in 14 chars. # # 9.11.0 (Thu Nov 2 17:29:35 EST 1995): # * Added ibcs2 entry and info on iBCS2 standard. @@ -17198,23 +17198,23 @@ # * Exiled some utterly unidentifiable custom and homebrew types to the # UFO file; also, obsolete small-screen hardware; also, entries which # look flat-out incorrect, garbled, or redundant. These include the -# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, +# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile, # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu, -# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, -# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, -# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, -# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, -# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, -# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, -# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, -# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, -# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, +# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, +# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, +# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, +# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, +# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, +# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, +# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, +# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, +# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms. # * Corrected pcvt25h as suggested by Brian C. Grayson # <bgrayson@pine.ece.utexas.edu>. # 9.11.3 (Thu Nov 9 12:14:40 EST 1995): -# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. +# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. # * Added kent=\EOM to xterm entry. # # 9.11.4 (Fri Nov 10 08:31:35 EST 1995): @@ -17234,13 +17234,13 @@ # * Improved iris-ansi and sun entries. # * More flash string improvements. # * Corrected wy160 & wy160 as suggested by Robert Dunn -# * Added dim to at386. +# * Added dim to at386. # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says # he's ready to start using the termcap generated from this one. # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m, # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220. # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925, -# att610, att620, att630, +# att610, att620, att630, # * Changed hazeltine name prefix from h to hz. # * Sent t500 to the UFI file. # * I think we've sucked all the juice out of BSDI's termcap file now. @@ -17305,7 +17305,7 @@ # * Sun console entry correction from J.T. Conklin. # * Changed all DEC VT300 and up terminals to use VT300 tab set # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996): -# * Added smul to linux entry (we never noticed it was missing +# * Added smul to linux entry (we never noticed it was missing # because of sgr!). # * Added rmln to hp+labels (deduced from other HP entries). # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas, @@ -17318,7 +17318,7 @@ # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200, # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc, # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90, -# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, +# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000, # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx, # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25, @@ -17335,7 +17335,7 @@ # * Aha! The BRL terminals file told us what the Iris extensions mean. # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar, # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file: -# cit500, adm11. +# cit500, adm11. # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996): # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756, # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155. @@ -17362,7 +17362,7 @@ # * corrected pairs#8 typo in dtterm entry. # * added tvi9065. # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996): -# * updated xterm entry to cover 3.1.2E's new features. +# * updated xterm entry to cover 3.1.2E's new features. # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996): # * Added new minix entry # * Removed aliases of the form ^[0-9]* for obsolete terminals.