comparison src/window.c @ 109351:c8a969d13eda

merge trunk

109350:c11d07f3d731

extern Lisp_Object Qtty;


DEFUN ("windowp", Fwindowp, Swindowp, 1, 1, 0,
       doc: /* Return t if OBJECT is a window.  */)
     (object)
     Lisp_Object object;
{
  return WINDOWP (object) ? Qt : Qnil;
}

DEFUN ("window-live-p", Fwindow_live_p, Swindow_live_p, 1, 1, 0,
       doc: /* Return t if OBJECT is a window which is currently visible.  */)
     (object)
     Lisp_Object object;
{
  return WINDOW_LIVE_P (object) ? Qt : Qnil;
}

Lisp_Object

  return val;
}

DEFUN ("selected-window", Fselected_window, Sselected_window, 0, 0, 0,
       doc: /* Return the window that the cursor now appears in and commands apply to.  */)
     ()
{
  return selected_window;
}

DEFUN ("minibuffer-window", Fminibuffer_window, Sminibuffer_window, 0, 1, 0,
       doc: /* Return the window used now for minibuffers.
If the optional argument FRAME is specified, return the minibuffer window
used by that frame.  */)
     (frame)
    Lisp_Object frame;
{
  if (NILP (frame))
    frame = selected_frame;
  CHECK_LIVE_FRAME (frame);
  return FRAME_MINIBUF_WINDOW (XFRAME (frame));
}

DEFUN ("window-minibuffer-p", Fwindow_minibuffer_p, Swindow_minibuffer_p, 0, 1, 0,
       doc: /* Return non-nil if WINDOW is a minibuffer window.
WINDOW defaults to the selected window.  */)
     (window)
     Lisp_Object window;
{
  struct window *w = decode_window (window);
  return MINI_WINDOW_P (w) ? Qt : Qnil;
}

where X and Y are the pixel coordinates relative to the top left corner
of the window.  The remaining elements are omitted if the character after
POS is fully visible; otherwise, RTOP and RBOT are the number of pixels
off-window at the top and bottom of the row, ROWH is the height of the
display row, and VPOS is the row number (0-based) containing POS.  */)
     (pos, window, partially)
     Lisp_Object pos, window, partially;
{
  register struct window *w;
  register int posint;
  register struct buffer *buf;
  struct text_pos top;

the bottom of the text line.  If there are off-window pixels at the top
of the (first) text line, YPOS is negative.

Return nil if window display is not up-to-date.  In that case, use
`pos-visible-in-window-p' to obtain the information.  */)
     (line, window)
     Lisp_Object line, window;
{
  register struct window *w;
  register struct buffer *b;
  struct glyph_row *row, *end_row;
  int max_y, crop, i, n;

}

DEFUN ("window-buffer", Fwindow_buffer, Swindow_buffer, 0, 1, 0,
       doc: /* Return the buffer that WINDOW is displaying.
WINDOW defaults to the selected window.  */)
     (window)
     Lisp_Object window;
{
  return decode_window (window)->buffer;
}

DEFUN ("window-height", Fwindow_height, Swindow_height, 0, 1, 0,
       doc: /* Return the number of lines in WINDOW.
WINDOW defaults to the selected window.

The return value includes WINDOW's mode line and header line, if any.  */)
     (window)
     Lisp_Object window;
{
  return decode_any_window (window)->total_lines;
}

DEFUN ("window-width", Fwindow_width, Swindow_width, 0, 1, 0,

WINDOW defaults to the selected window.

Note: The return value is the number of columns available for text in
WINDOW.  If you want to find out how many columns WINDOW takes up, use
(let ((edges (window-edges))) (- (nth 2 edges) (nth 0 edges))).  */)
     (window)
     Lisp_Object window;
{
  return make_number (window_box_text_cols (decode_any_window (window)));
}

DEFUN ("window-full-width-p", Fwindow_full_width_p, Swindow_full_width_p, 0, 1, 0,
       doc: /* Return t if WINDOW is as wide as its frame.
WINDOW defaults to the selected window.  */)
     (window)
     Lisp_Object window;
{
  return WINDOW_FULL_WIDTH_P (decode_any_window (window)) ? Qt : Qnil;
}

DEFUN ("window-hscroll", Fwindow_hscroll, Swindow_hscroll, 0, 1, 0,
       doc: /* Return the number of columns by which WINDOW is scrolled from left margin.
WINDOW defaults to the selected window.  */)
     (window)
     Lisp_Object window;
{
  return decode_window (window)->hscroll;
}

DEFUN ("set-window-hscroll", Fset_window_hscroll, Sset_window_hscroll, 2, 2, 0,
       doc: /* Set number of columns WINDOW is scrolled from left margin to NCOL.
Return NCOL.  NCOL should be zero or positive.

Note that if `automatic-hscrolling' is non-nil, you cannot scroll the
window so that the location of point moves off-window.  */)
     (window, ncol)
     Lisp_Object window, ncol;
{
  struct window *w = decode_window (window);
  int hscroll;

  CHECK_NUMBER (ncol);

DEFUN ("window-redisplay-end-trigger", Fwindow_redisplay_end_trigger,
       Swindow_redisplay_end_trigger, 0, 1, 0,
       doc: /* Return WINDOW's redisplay end trigger value.
WINDOW defaults to the selected window.
See `set-window-redisplay-end-trigger' for more information.  */)
     (window)
     Lisp_Object window;
{
  return decode_window (window)->redisplay_end_trigger;
}

DEFUN ("set-window-redisplay-end-trigger", Fset_window_redisplay_end_trigger,

VALUE should be a buffer position (typically a marker) or nil.
If it is a buffer position, then if redisplay in WINDOW reaches a position
beyond VALUE, the functions in `redisplay-end-trigger-functions' are called
with two arguments: WINDOW, and the end trigger value.
Afterwards the end-trigger value is reset to nil.  */)
     (window, value)
     register Lisp_Object window, value;
{
  register struct window *w;

  w = decode_window (window);
  w->redisplay_end_trigger = value;

RIGHT is one more than the rightmost column occupied by WINDOW.
BOTTOM is one more than the bottommost row occupied by WINDOW.
The edges include the space used by WINDOW's scroll bar, display
margins, fringes, header line, and/or mode line.  For the edges of
just the text area, use `window-inside-edges'.  */)
     (window)
     Lisp_Object window;
{
  register struct window *w = decode_any_window (window);

  return Fcons (make_number (WINDOW_LEFT_EDGE_COL (w)),
	 Fcons (make_number (WINDOW_TOP_EDGE_LINE (w)),

RIGHT is one more than the rightmost x position occupied by WINDOW.
BOTTOM is one more than the bottommost y position occupied by WINDOW.
The pixel edges include the space used by WINDOW's scroll bar, display
margins, fringes, header line, and/or mode line.  For the pixel edges
of just the text area, use `window-inside-pixel-edges'.  */)
     (window)
     Lisp_Object window;
{
  register struct window *w = decode_any_window (window);

  return Fcons (make_number (WINDOW_LEFT_EDGE_X (w)),
	 Fcons (make_number (WINDOW_TOP_EDGE_Y (w)),

RIGHT is one more than the rightmost x position occupied by WINDOW.
BOTTOM is one more than the bottommost y position occupied by WINDOW.
The pixel edges include the space used by WINDOW's scroll bar, display
margins, fringes, header line, and/or mode line.  For the pixel edges
of just the text area, use `window-inside-absolute-pixel-edges'.  */)
     (window)
     Lisp_Object window;
{
  register struct window *w = decode_any_window (window);
  int add_x, add_y;
  calc_absolute_offset (w, &add_x, &add_y);

RIGHT is one more than the rightmost column of WINDOW's text area.
BOTTOM is one more than the bottommost row of WINDOW's text area.
The inside edges do not include the space used by the WINDOW's scroll
bar, display margins, fringes, header line, and/or mode line.  */)
     (window)
     Lisp_Object window;
{
  register struct window *w = decode_any_window (window);

  return list4 (make_number (WINDOW_BOX_LEFT_EDGE_COL (w)
			     + WINDOW_LEFT_MARGIN_COLS (w)

RIGHT is one more than the rightmost x position of WINDOW's text area.
BOTTOM is one more than the bottommost y position of WINDOW's text area.
The inside edges do not include the space used by WINDOW's scroll bar,
display margins, fringes, header line, and/or mode line.  */)
     (window)
     Lisp_Object window;
{
  register struct window *w = decode_any_window (window);

  return list4 (make_number (WINDOW_BOX_LEFT_EDGE_X (w)
			     + WINDOW_LEFT_MARGIN_WIDTH (w)

RIGHT is one more than the rightmost x position of WINDOW's text area.
BOTTOM is one more than the bottommost y position of WINDOW's text area.
The inside edges do not include the space used by WINDOW's scroll bar,
display margins, fringes, header line, and/or mode line.  */)
     (window)
     Lisp_Object window;
{
  register struct window *w = decode_any_window (window);
  int add_x, add_y;
  calc_absolute_offset (w, &add_x, &add_y);

If they are in the right fringe of WINDOW, `right-fringe' is returned.
If they are on the border between WINDOW and its right sibling,
  `vertical-line' is returned.
If they are in the windows's left or right marginal areas, `left-margin'\n\
  or `right-margin' is returned.  */)
     (coordinates, window)
     register Lisp_Object coordinates, window;
{
  struct window *w;
  struct frame *f;
  int x, y;
  Lisp_Object lx, ly;

DEFUN ("window-at", Fwindow_at, Swindow_at, 2, 3, 0,
       doc: /* Return window containing coordinates X and Y on FRAME.
If omitted, FRAME defaults to the currently selected frame.
The top left corner of the frame is considered to be row 0,
column 0.  */)
     (x, y, frame)
     Lisp_Object x, y, frame;
{
  struct frame *f;

  if (NILP (frame))
    frame = selected_frame;

Note that, when WINDOW is the selected window and its buffer
is also currently selected, the value returned is the same as (point).
It would be more strictly correct to return the `top-level' value
of point, outside of any save-excursion forms.
But that is hard to define.  */)
     (window)
     Lisp_Object window;
{
  register struct window *w = decode_window (window);

  if (w == XWINDOW (selected_window)
      && current_buffer == XBUFFER (w->buffer))

DEFUN ("window-start", Fwindow_start, Swindow_start, 0, 1, 0,
       doc: /* Return position at which display currently starts in WINDOW.
WINDOW defaults to the selected window.
This is updated by redisplay or by calling `set-window-start'.  */)
     (window)
     Lisp_Object window;
{
  return Fmarker_position (decode_window (window)->start);
}

/* This is text temporarily removed from the doc string below.

does not update this value.
Return nil if there is no recorded value.  \(This can happen if the
last redisplay of WINDOW was preempted, and did not finish.)
If UPDATE is non-nil, compute the up-to-date position
if it isn't already recorded.  */)
     (window, update)
     Lisp_Object window, update;
{
  Lisp_Object value;
  struct window *w = decode_window (window);
  Lisp_Object buf;
  struct buffer *b;

}

DEFUN ("set-window-point", Fset_window_point, Sset_window_point, 2, 2, 0,
       doc: /* Make point value in WINDOW be at position POS in WINDOW's buffer.
Return POS.  */)
     (window, pos)
     Lisp_Object window, pos;
{
  register struct window *w = decode_window (window);

  CHECK_NUMBER_COERCE_MARKER (pos);
  if (w == XWINDOW (selected_window)

DEFUN ("set-window-start", Fset_window_start, Sset_window_start, 2, 3, 0,
       doc: /* Make display in WINDOW start at position POS in WINDOW's buffer.
WINDOW defaults to the selected window.  Return POS.
Optional third arg NOFORCE non-nil inhibits next redisplay from
overriding motion of point in order to display at this exact start.  */)
     (window, pos, noforce)
     Lisp_Object window, pos, noforce;
{
  register struct window *w = decode_window (window);

  CHECK_NUMBER_COERCE_MARKER (pos);
  set_marker_restricted (w->start, pos, w->buffer);

`kill-buffer' can delete a dedicated window and the containing frame.

Functions like `set-window-buffer' may change the buffer displayed by a
window, unless that window is "strongly" dedicated to its buffer, that
is the value returned by `window-dedicated-p' is t.  */)
     (window)
     Lisp_Object window;
{
  return decode_window (window)->dedicated;
}

DEFUN ("set-window-dedicated-p", Fset_window_dedicated_p,

As a special case, if FLAG is t, mark WINDOW as "strongly" dedicated to
its buffer.  Functions like `set-window-buffer' may change the buffer
displayed by a window, unless that window is strongly dedicated to its
buffer.  If and when `set-window-buffer' displays another buffer in a
window, it also makes sure that the window is not marked as dedicated.  */)
     (window, flag)
     Lisp_Object window, flag;
{
  register struct window *w = decode_window (window);

  w->dedicated = flag;
  return w->dedicated;

DEFUN ("window-parameters", Fwindow_parameters, Swindow_parameters,
       0, 1, 0,
       doc: /* Return the parameters of WINDOW and their values.
WINDOW defaults to the selected window.  The return value is a list of
elements of the form (PARAMETER . VALUE). */)
     (window)
     Lisp_Object window;
{
  return Fcopy_alist (decode_window (window)->window_parameters);
}

DEFUN ("window-parameter", Fwindow_parameter, Swindow_parameter,
       2, 2, 0,
       doc:  /* Return WINDOW's value for PARAMETER.
WINDOW defaults to the selected window.  */)
     (window, parameter)
     Lisp_Object window, parameter;
{
  Lisp_Object result;

  result = Fassq (parameter, decode_window (window)->window_parameters);
  return CDR_SAFE (result);

DEFUN ("set-window-parameter", Fset_window_parameter,
       Sset_window_parameter, 3, 3, 0,
       doc: /* Set WINDOW's value of PARAMETER to VALUE.
WINDOW defaults to the selected window.  Return VALUE.  */)
     (window, parameter, value)
     Lisp_Object window, parameter, value;
{
  register struct window *w = decode_window (window);
  Lisp_Object old_alist_elt;

  old_alist_elt = Fassq (parameter, w->window_parameters);

DEFUN ("window-display-table", Fwindow_display_table, Swindow_display_table,
       0, 1, 0,
       doc: /* Return the display-table that WINDOW is using.
WINDOW defaults to the selected window.  */)
     (window)
     Lisp_Object window;
{
  return decode_window (window)->display_table;
}

/* Get the display table for use on window W.  This is either W's

  return dp;
}

DEFUN ("set-window-display-table", Fset_window_display_table, Sset_window_display_table, 2, 2, 0,
       doc: /* Set WINDOW's display-table to TABLE.  */)
     (window, table)
     register Lisp_Object window, table;
{
  register struct window *w;

  w = decode_window (window);
  w->display_table = table;

DEFUN ("delete-window", Fdelete_window, Sdelete_window, 0, 1, "",
       doc: /* Remove WINDOW from its frame.
WINDOW defaults to the selected window.  Return nil.
Signal an error when WINDOW is the only window on its frame.  */)
     (window)
     register Lisp_Object window;
{
  struct frame *f;
  if (NILP (window))
    window = selected_window;
  else

If you use consistent values for MINIBUF and ALL-FRAMES, you can use
`next-window' to iterate through the entire cycle of acceptable
windows, eventually ending up back at the window you started with.
`previous-window' traverses the same cycle, in the reverse order.  */)
     (window, minibuf, all_frames)
     Lisp_Object window, minibuf, all_frames;
{
  return next_window (window, minibuf, all_frames, 1);
}

If you use consistent values for MINIBUF and ALL-FRAMES, you can
use `previous-window' to iterate through the entire cycle of
acceptable windows, eventually ending up back at the window you
started with.  `next-window' traverses the same cycle, in the
reverse order.  */)
     (window, minibuf, all_frames)
     Lisp_Object window, minibuf, all_frames;
{
  return next_window (window, minibuf, all_frames, 0);
}

This function uses `next-window' for finding the window to select.
The argument ALL-FRAMES has the same meaning as in `next-window',
but the MINIBUF argument of `next-window' is always effectively
nil.  */)
     (count, all_frames)
     Lisp_Object count, all_frames;
{
  Lisp_Object window;
  int i;

  CHECK_NUMBER (count);

WINDOW nil or omitted means use the selected window.
MINIBUF t means include the minibuffer window, even if it isn't active.
MINIBUF nil or omitted means include the minibuffer window only
if it's active.
MINIBUF neither nil nor t means never include the minibuffer window.  */)
     (frame, minibuf, window)
     Lisp_Object frame, minibuf, window;
{
  if (NILP (window))
    window = FRAMEP (frame) ? XFRAME (frame)->selected_window : selected_window;
  CHECK_WINDOW (window);
  if (NILP (frame))

If optional argument FRAME is `visible', search all visible frames.
If FRAME is 0, search all visible and iconified frames.
If FRAME is t, search all frames.
If FRAME is nil, search only the selected frame.
If FRAME is a frame, search only that frame.  */)
  (frame, dedicated)
     Lisp_Object frame, dedicated;
{
  register Lisp_Object w;
  /* First try for a window that is full-width */
  w = window_loop (GET_LRU_WINDOW,
		   NILP (dedicated) ? make_number (1) : make_number (3),

If optional argument FRAME is `visible', search all visible frames.
If FRAME is 0, search all visible and iconified frames.
If FRAME is t, search all frames.
If FRAME is nil, search only the selected frame.
If FRAME is a frame, search only that frame.  */)
    (frame, dedicated)
     Lisp_Object frame, dedicated;
{
  return window_loop (GET_LARGEST_WINDOW, dedicated, 0,
		      frame);
}

If optional argument FRAME is `visible', search all visible frames.
If optional argument FRAME is 0, search all visible and iconified frames.
If FRAME is t, search all frames.
If FRAME is nil, search only the selected frame.
If FRAME is a frame, search only that frame.  */)
     (buffer_or_name, frame)
     Lisp_Object buffer_or_name, frame;
{
  Lisp_Object buffer;

  if (NILP (buffer_or_name))
    buffer = Fcurrent_buffer ();

This function tries to reduce display jumps by keeping the text
previously visible in WINDOW in the same place on the frame.  Doing this
depends on the value of (window-start WINDOW), so if calling this
function in a program gives strange scrolling, make sure the
window-start value is reasonable when this function is called.  */)
     (window)
     Lisp_Object window;
{
  struct window *w;
  int startpos;
  int top, new_top;

If FRAME is nil, search all frames.
If FRAME is t, search only the selected frame.
If FRAME is a frame, search only that frame.
When a window showing BUFFER-OR-NAME is dedicated and the only window of
its frame, that frame is deleted when there are other frames left.  */)
     (buffer_or_name, frame)
     Lisp_Object buffer_or_name, frame;
{
  Lisp_Object buffer;

  /* FRAME uses t and nil to mean the opposite of what window_loop
     expects.  */

When a window showing BUFFER-OR-NAME is dedicated that window is
deleted.  If that window is the only window on its frame, that frame is
deleted too when there are other frames left.  If there are no other
frames left, some other buffer is displayed in that window.  */)
     (buffer_or_name)
     Lisp_Object buffer_or_name;
{
  Lisp_Object buffer;

  if (NILP (buffer_or_name))
    buffer = Fcurrent_buffer ();

buffer (that is `window-dedicated-p' returns t for WINDOW) and does not
already display BUFFER-OR-NAME.

This function runs `window-scroll-functions' before running
`window-configuration-change-hook'.  */)
     (window, buffer_or_name, keep_margins)
     register Lisp_Object window, buffer_or_name, keep_margins;
{
  register Lisp_Object tem, buffer;
  register struct window *w = decode_window (window);

  XSETWINDOW (window, w);

at the front of the list of recently selected ones and do not
make this window the most recently selected one.

Note that the main editor command loop selects the buffer of the
selected window before each command.  */)
     (window, norecord)
     register Lisp_Object window, norecord;
{
  register struct window *w;
  register struct window *ow;
  struct frame *sf;

       0, 1, 0,
       doc: /* Force all windows to be updated on next redisplay.
If optional arg OBJECT is a window, force redisplay of that window only.
If OBJECT is a buffer or buffer name, force redisplay of all windows
displaying that buffer.  */)
     (object)
     Lisp_Object object;
{
  if (NILP (object))
    {
      windows_or_buffers_changed++;
      update_mode_lines++;

Returns the newly created window (which is the lower or rightmost one).
The upper or leftmost window is the original one, and remains selected
if it was selected before.

See Info node `(elisp)Splitting Windows' for more details and examples.  */)
     (window, size, horizontal)
     Lisp_Object window, size, horizontal;
{
  register Lisp_Object new;
  register struct window *o, *p;
  FRAME_PTR fo;
  register int size_int;

window wider by SIZE columns.  If SIZE is negative, shrink the window by
-SIZE lines or columns.  Return nil.

This function can delete windows if they get too small.  The size of
fixed size windows is not altered by this function.  */)
     (size, horizontal)
     Lisp_Object size, horizontal;
{
  CHECK_NUMBER (size);
  enlarge_window (selected_window, XINT (size), !NILP (horizontal));

  run_window_configuration_change_hook (SELECTED_FRAME ());

window narrower by SIZE columns.  If SIZE is negative, enlarge selected
window by -SIZE lines or columns.  Return nil.

This function can delete windows if they get too small.  The size of
fixed size windows is not altered by this function. */)
     (size, horizontal)
     Lisp_Object size, horizontal;
{
  CHECK_NUMBER (size);
  enlarge_window (selected_window, -XINT (size), !NILP (horizontal));

  run_window_configuration_change_hook (SELECTED_FRAME ());

Otherwise, adjust the height, moving the bottom edge.

Following siblings of the selected window are resized to fulfill
the size request.  If they become too small in the process, they
are not deleted; instead, we signal an error.  */)
  (window, delta, horizontal)
  Lisp_Object window, delta, horizontal;
{
  CHECK_NUMBER (delta);
  if (NILP (window))
    window = selected_window;
  adjust_window_trailing_edge (window, XINT (delta), !NILP (horizontal));

If ARG is omitted or nil, scroll upward by a near full screen.
A near full screen is `next-screen-context-lines' less than a full screen.
Negative ARG means scroll downward.
If ARG is the atom `-', scroll downward by nearly full screen.
When calling from a program, supply as argument a number, nil, or `-'.  */)
     (arg)
     Lisp_Object arg;
{
  scroll_command (arg, 1);
  return Qnil;
}

If ARG is omitted or nil, scroll down by a near full screen.
A near full screen is `next-screen-context-lines' less than a full screen.
Negative ARG means scroll upward.
If ARG is the atom `-', scroll upward by nearly full screen.
When calling from a program, supply as argument a number, nil, or `-'.  */)
     (arg)
     Lisp_Object arg;
{
  scroll_command (arg, -1);
  return Qnil;
}


If `other-window-scroll-buffer' is non-nil, a window
showing that buffer is used.
If in the minibuffer, `minibuffer-scroll-window' if non-nil
specifies the window.  This takes precedence over
`other-window-scroll-buffer'.  */)
     ()
{
  Lisp_Object window;

  if (MINI_WINDOW_P (XWINDOW (selected_window))
      && !NILP (Vminibuf_scroll_window))

If `other-window-scroll-buffer' is non-nil, scroll the window
showing that buffer, popping the buffer up if necessary.
If in the minibuffer, `minibuffer-scroll-window' if non-nil
specifies the window to scroll.  This takes precedence over
`other-window-scroll-buffer'.  */)
     (arg)
     Lisp_Object arg;
{
  Lisp_Object window;
  struct window *w;
  int count = SPECPDL_INDEX ();

effect after the change.
If SET-MINIMUM is non-nil, the new scroll amount becomes the
lower bound for automatic scrolling, i.e. automatic scrolling
will not scroll a window to a column less than the value returned
by this function.  This happens in an interactive call.  */)
     (arg, set_minimum)
     register Lisp_Object arg, set_minimum;
{
  Lisp_Object result;
  int hscroll;
  struct window *w = XWINDOW (selected_window);

effect after the change.
If SET-MINIMUM is non-nil, the new scroll amount becomes the
lower bound for automatic scrolling, i.e. automatic scrolling
will not scroll a window to a column less than the value returned
by this function.  This happens in an interactive call.  */)
     (arg, set_minimum)
     register Lisp_Object arg, set_minimum;
{
  Lisp_Object result;
  int hscroll;
  struct window *w = XWINDOW (selected_window);

}

DEFUN ("minibuffer-selected-window", Fminibuffer_selected_window, Sminibuffer_selected_window, 0, 0, 0,
       doc: /* Return the window which was selected when entering the minibuffer.
Returns nil, if selected window is not a minibuffer window.  */)
     ()
{
  if (minibuf_level > 0
      && MINI_WINDOW_P (XWINDOW (selected_window))
      && WINDOW_LIVE_P (minibuf_selected_window))
    return minibuf_selected_window;

height needed); if `recenter-redisplay' has the special value `tty',
then only tty frame are redrawn.

Just C-u as prefix means put point in the center of the window
and redisplay normally--don't erase and redraw the frame.  */)
     (arg)
     register Lisp_Object arg;
{
  struct window *w = XWINDOW (selected_window);
  struct buffer *buf = XBUFFER (w->buffer);
  struct buffer *obuf = current_buffer;
  int center_p = 0;

       doc: /* Return the height in lines of the text display area of WINDOW.
WINDOW defaults to the selected window.

The return value does not include the mode line, any header line, nor
any partial-height lines in the text display area.  */)
     (window)
     Lisp_Object window;
{
  struct window *w = decode_window (window);
  int pixel_height = window_box_height (w);
  int line_height = pixel_height / FRAME_LINE_HEIGHT (XFRAME (w->frame));
  return make_number (line_height);

       1, 1, "P",
       doc: /* Position point relative to window.
With no argument, position point at center of window.
An argument specifies vertical position within the window;
zero means top of window, negative means relative to bottom of window.  */)
     (arg)
     Lisp_Object arg;
{
  struct window *w = XWINDOW (selected_window);
  int lines, start;
  Lisp_Object window;
#if 0

#define SAVED_WINDOW_N(swv,n) \
  ((struct saved_window *) (XVECTOR ((swv)->contents[(n)])))

DEFUN ("window-configuration-p", Fwindow_configuration_p, Swindow_configuration_p, 1, 1, 0,
       doc: /* Return t if OBJECT is a window-configuration object.  */)
     (object)
     Lisp_Object object;
{
  return WINDOW_CONFIGURATIONP (object) ? Qt : Qnil;
}

DEFUN ("window-configuration-frame", Fwindow_configuration_frame, Swindow_configuration_frame, 1, 1, 0,
       doc: /* Return the frame that CONFIG, a window-configuration object, is about.  */)
     (config)
     Lisp_Object config;
{
  register struct save_window_data *data;
  struct Lisp_Vector *saved_windows;

  CHECK_WINDOW_CONFIGURATION (config);

CONFIGURATION must be a value previously returned
by `current-window-configuration' (which see).
If CONFIGURATION was made from a frame that is now deleted,
only frame-independent values can be restored.  In this case,
the return value is nil.  Otherwise the value is t.  */)
     (configuration)
     Lisp_Object configuration;
{
  register struct save_window_data *data;
  struct Lisp_Vector *saved_windows;
  Lisp_Object new_current_buffer;
  Lisp_Object frame;

and for each displayed buffer, where display starts, and the positions of
point and mark.  An exception is made for point in the current buffer:
its value is -not- saved.
This also records the currently selected frame, and FRAME's focus
redirection (see `redirect-frame-focus').  */)
     (frame)
     Lisp_Object frame;
{
  register Lisp_Object tem;
  register int n_windows;
  register struct save_window_data *data;
  register int i;

and the value of point and mark for each window.
Also restore the choice of selected window.
Also restore which buffer is current.
Does not restore the value of point in current buffer.
usage: (save-window-excursion BODY...)  */)
     (args)
     Lisp_Object args;
{
  register Lisp_Object val;
  register int count = SPECPDL_INDEX ();

  record_unwind_protect (Fset_window_configuration,

again be a window or a list representing a window split, and so on.
EDGES is a list \(LEFT TOP RIGHT BOTTOM) as returned by `window-edges'.

If FRAME is nil or omitted, return information on the currently
selected frame.  */)
     (frame)
     Lisp_Object frame;
{
  FRAME_PTR f;

  if (NILP (frame))
    frame = selected_frame;

If WINDOW is nil, set margins of the currently selected window.
Second arg LEFT-WIDTH specifies the number of character cells to
reserve for the left marginal area.  Optional third arg RIGHT-WIDTH
does the same for the right marginal area.  A nil width parameter
means no margin.  */)
     (window, left_width, right_width)
     Lisp_Object window, left_width, right_width;
{
  struct window *w = decode_window (window);

  /* Translate negative or zero widths to nil.
     Margins that are too wide have to be checked elsewhere.  */

       doc: /* Get width of marginal areas of window WINDOW.
If WINDOW is omitted or nil, use the currently selected window.
Value is a cons of the form (LEFT-WIDTH . RIGHT-WIDTH).
If a marginal area does not exist, its width will be returned
as nil.  */)
     (window)
     Lisp_Object window;
{
  struct window *w = decode_window (window);
  return Fcons (w->left_margin_cols, w->right_margin_cols);
}

frame's default fringe width.  Default fringe widths can be set with
the command `set-fringe-style'.
If optional fourth arg OUTSIDE-MARGINS is non-nil, draw the fringes
outside of the display margins.  By default, fringes are drawn between
display marginal areas and the text area.  */)
     (window, left_width, right_width, outside_margins)
     Lisp_Object window, left_width, right_width, outside_margins;
{
  struct window *w = decode_window (window);

  if (!NILP (left_width))
    CHECK_NATNUM (left_width);

DEFUN ("window-fringes", Fwindow_fringes, Swindow_fringes,
       0, 1, 0,
       doc: /* Get width of fringes of window WINDOW.
If WINDOW is omitted or nil, use the currently selected window.
Value is a list of the form (LEFT-WIDTH RIGHT-WIDTH OUTSIDE-MARGINS).  */)
     (window)
     Lisp_Object window;
{
  struct window *w = decode_window (window);

  return Fcons (make_number (WINDOW_LEFT_FRINGE_WIDTH (w)),
		Fcons (make_number (WINDOW_RIGHT_FRINGE_WIDTH (w)),

Third parameter VERTICAL-TYPE specifies the type of the vertical scroll
bar: left, right, or nil.
If WIDTH is nil, use the frame's scroll-bar width.
If VERTICAL-TYPE is t, use the frame's scroll-bar type.
Fourth parameter HORIZONTAL-TYPE is currently unused.  */)
     (window, width, vertical_type, horizontal_type)
     Lisp_Object window, width, vertical_type, horizontal_type;
{
  struct window *w = decode_window (window);

  if (!NILP (width))
    {

       doc: /* Get width and type of scroll bars of window WINDOW.
If WINDOW is omitted or nil, use the currently selected window.
Value is a list of the form (WIDTH COLS VERTICAL-TYPE HORIZONTAL-TYPE).
If WIDTH is nil or TYPE is t, the window is using the frame's corresponding
value.  */)
     (window)
     Lisp_Object window;
{
  struct window *w = decode_window (window);
  return Fcons (make_number ((WINDOW_CONFIG_SCROLL_BAR_WIDTH (w)
			      ? WINDOW_CONFIG_SCROLL_BAR_WIDTH (w)
			      : WINDOW_SCROLL_BAR_AREA_WIDTH (w))),

DEFUN ("window-vscroll", Fwindow_vscroll, Swindow_vscroll, 0, 2, 0,
       doc: /* Return the amount by which WINDOW is scrolled vertically.
Use the selected window if WINDOW is nil or omitted.
Normally, value is a multiple of the canonical character height of WINDOW;
optional second arg PIXELS-P means value is measured in pixels.  */)
  (window, pixels_p)
     Lisp_Object window, pixels_p;
{
  Lisp_Object result;
  struct frame *f;
  struct window *w;

optional third arg PIXELS-P non-nil means that VSCROLL is in pixels.
If PIXELS-P is nil, VSCROLL may have to be rounded so that it
corresponds to an integral number of pixels.  The return value is the
result of this rounding.
If PIXELS-P is non-nil, the return value is VSCROLL.  */)
  (window, vscroll, pixels_p)
     Lisp_Object window, vscroll, pixels_p;
{
  struct window *w;
  struct frame *f;

  if (NILP (window))

DEFUN ("compare-window-configurations", Fcompare_window_configurations,
       Scompare_window_configurations, 2, 2, 0,
       doc: /* Compare two window configurations as regards the structure of windows.
This function ignores details such as the values of point and mark
and scrolling positions.  */)
     (x, y)
     Lisp_Object x, y;
{
  if (compare_window_configurations (x, y, 1))
    return Qt;
  return Qnil;
}

109351:c8a969d13eda

extern Lisp_Object Qtty;


DEFUN ("windowp", Fwindowp, Swindowp, 1, 1, 0,
       doc: /* Return t if OBJECT is a window.  */)
  (Lisp_Object object)
{
  return WINDOWP (object) ? Qt : Qnil;
}

DEFUN ("window-live-p", Fwindow_live_p, Swindow_live_p, 1, 1, 0,
       doc: /* Return t if OBJECT is a window which is currently visible.  */)
  (Lisp_Object object)
{
  return WINDOW_LIVE_P (object) ? Qt : Qnil;
}

Lisp_Object

  return val;
}

DEFUN ("selected-window", Fselected_window, Sselected_window, 0, 0, 0,
       doc: /* Return the window that the cursor now appears in and commands apply to.  */)
  (void)
{
  return selected_window;
}

DEFUN ("minibuffer-window", Fminibuffer_window, Sminibuffer_window, 0, 1, 0,
       doc: /* Return the window used now for minibuffers.
If the optional argument FRAME is specified, return the minibuffer window
used by that frame.  */)
  (Lisp_Object frame)
{
  if (NILP (frame))
    frame = selected_frame;
  CHECK_LIVE_FRAME (frame);
  return FRAME_MINIBUF_WINDOW (XFRAME (frame));
}

DEFUN ("window-minibuffer-p", Fwindow_minibuffer_p, Swindow_minibuffer_p, 0, 1, 0,
       doc: /* Return non-nil if WINDOW is a minibuffer window.
WINDOW defaults to the selected window.  */)
  (Lisp_Object window)
{
  struct window *w = decode_window (window);
  return MINI_WINDOW_P (w) ? Qt : Qnil;
}

where X and Y are the pixel coordinates relative to the top left corner
of the window.  The remaining elements are omitted if the character after
POS is fully visible; otherwise, RTOP and RBOT are the number of pixels
off-window at the top and bottom of the row, ROWH is the height of the
display row, and VPOS is the row number (0-based) containing POS.  */)
  (Lisp_Object pos, Lisp_Object window, Lisp_Object partially)
{
  register struct window *w;
  register int posint;
  register struct buffer *buf;
  struct text_pos top;

the bottom of the text line.  If there are off-window pixels at the top
of the (first) text line, YPOS is negative.

Return nil if window display is not up-to-date.  In that case, use
`pos-visible-in-window-p' to obtain the information.  */)
  (Lisp_Object line, Lisp_Object window)
{
  register struct window *w;
  register struct buffer *b;
  struct glyph_row *row, *end_row;
  int max_y, crop, i, n;

}

DEFUN ("window-buffer", Fwindow_buffer, Swindow_buffer, 0, 1, 0,
       doc: /* Return the buffer that WINDOW is displaying.
WINDOW defaults to the selected window.  */)
  (Lisp_Object window)
{
  return decode_window (window)->buffer;
}

DEFUN ("window-height", Fwindow_height, Swindow_height, 0, 1, 0,
       doc: /* Return the number of lines in WINDOW.
WINDOW defaults to the selected window.

The return value includes WINDOW's mode line and header line, if any.  */)
  (Lisp_Object window)
{
  return decode_any_window (window)->total_lines;
}

DEFUN ("window-width", Fwindow_width, Swindow_width, 0, 1, 0,

WINDOW defaults to the selected window.

Note: The return value is the number of columns available for text in
WINDOW.  If you want to find out how many columns WINDOW takes up, use
(let ((edges (window-edges))) (- (nth 2 edges) (nth 0 edges))).  */)
  (Lisp_Object window)
{
  return make_number (window_box_text_cols (decode_any_window (window)));
}

DEFUN ("window-full-width-p", Fwindow_full_width_p, Swindow_full_width_p, 0, 1, 0,
       doc: /* Return t if WINDOW is as wide as its frame.
WINDOW defaults to the selected window.  */)
  (Lisp_Object window)
{
  return WINDOW_FULL_WIDTH_P (decode_any_window (window)) ? Qt : Qnil;
}

DEFUN ("window-hscroll", Fwindow_hscroll, Swindow_hscroll, 0, 1, 0,
       doc: /* Return the number of columns by which WINDOW is scrolled from left margin.
WINDOW defaults to the selected window.  */)
  (Lisp_Object window)
{
  return decode_window (window)->hscroll;
}

DEFUN ("set-window-hscroll", Fset_window_hscroll, Sset_window_hscroll, 2, 2, 0,
       doc: /* Set number of columns WINDOW is scrolled from left margin to NCOL.
Return NCOL.  NCOL should be zero or positive.

Note that if `automatic-hscrolling' is non-nil, you cannot scroll the
window so that the location of point moves off-window.  */)
  (Lisp_Object window, Lisp_Object ncol)
{
  struct window *w = decode_window (window);
  int hscroll;

  CHECK_NUMBER (ncol);

DEFUN ("window-redisplay-end-trigger", Fwindow_redisplay_end_trigger,
       Swindow_redisplay_end_trigger, 0, 1, 0,
       doc: /* Return WINDOW's redisplay end trigger value.
WINDOW defaults to the selected window.
See `set-window-redisplay-end-trigger' for more information.  */)
  (Lisp_Object window)
{
  return decode_window (window)->redisplay_end_trigger;
}

DEFUN ("set-window-redisplay-end-trigger", Fset_window_redisplay_end_trigger,

VALUE should be a buffer position (typically a marker) or nil.
If it is a buffer position, then if redisplay in WINDOW reaches a position
beyond VALUE, the functions in `redisplay-end-trigger-functions' are called
with two arguments: WINDOW, and the end trigger value.
Afterwards the end-trigger value is reset to nil.  */)
  (register Lisp_Object window, Lisp_Object value)
{
  register struct window *w;

  w = decode_window (window);
  w->redisplay_end_trigger = value;

RIGHT is one more than the rightmost column occupied by WINDOW.
BOTTOM is one more than the bottommost row occupied by WINDOW.
The edges include the space used by WINDOW's scroll bar, display
margins, fringes, header line, and/or mode line.  For the edges of
just the text area, use `window-inside-edges'.  */)
  (Lisp_Object window)
{
  register struct window *w = decode_any_window (window);

  return Fcons (make_number (WINDOW_LEFT_EDGE_COL (w)),
	 Fcons (make_number (WINDOW_TOP_EDGE_LINE (w)),

RIGHT is one more than the rightmost x position occupied by WINDOW.
BOTTOM is one more than the bottommost y position occupied by WINDOW.
The pixel edges include the space used by WINDOW's scroll bar, display
margins, fringes, header line, and/or mode line.  For the pixel edges
of just the text area, use `window-inside-pixel-edges'.  */)
  (Lisp_Object window)
{
  register struct window *w = decode_any_window (window);

  return Fcons (make_number (WINDOW_LEFT_EDGE_X (w)),
	 Fcons (make_number (WINDOW_TOP_EDGE_Y (w)),

RIGHT is one more than the rightmost x position occupied by WINDOW.
BOTTOM is one more than the bottommost y position occupied by WINDOW.
The pixel edges include the space used by WINDOW's scroll bar, display
margins, fringes, header line, and/or mode line.  For the pixel edges
of just the text area, use `window-inside-absolute-pixel-edges'.  */)
  (Lisp_Object window)
{
  register struct window *w = decode_any_window (window);
  int add_x, add_y;
  calc_absolute_offset (w, &add_x, &add_y);

RIGHT is one more than the rightmost column of WINDOW's text area.
BOTTOM is one more than the bottommost row of WINDOW's text area.
The inside edges do not include the space used by the WINDOW's scroll
bar, display margins, fringes, header line, and/or mode line.  */)
  (Lisp_Object window)
{
  register struct window *w = decode_any_window (window);

  return list4 (make_number (WINDOW_BOX_LEFT_EDGE_COL (w)
			     + WINDOW_LEFT_MARGIN_COLS (w)

RIGHT is one more than the rightmost x position of WINDOW's text area.
BOTTOM is one more than the bottommost y position of WINDOW's text area.
The inside edges do not include the space used by WINDOW's scroll bar,
display margins, fringes, header line, and/or mode line.  */)
  (Lisp_Object window)
{
  register struct window *w = decode_any_window (window);

  return list4 (make_number (WINDOW_BOX_LEFT_EDGE_X (w)
			     + WINDOW_LEFT_MARGIN_WIDTH (w)

RIGHT is one more than the rightmost x position of WINDOW's text area.
BOTTOM is one more than the bottommost y position of WINDOW's text area.
The inside edges do not include the space used by WINDOW's scroll bar,
display margins, fringes, header line, and/or mode line.  */)
  (Lisp_Object window)
{
  register struct window *w = decode_any_window (window);
  int add_x, add_y;
  calc_absolute_offset (w, &add_x, &add_y);

If they are in the right fringe of WINDOW, `right-fringe' is returned.
If they are on the border between WINDOW and its right sibling,
  `vertical-line' is returned.
If they are in the windows's left or right marginal areas, `left-margin'\n\
  or `right-margin' is returned.  */)
  (register Lisp_Object coordinates, Lisp_Object window)
{
  struct window *w;
  struct frame *f;
  int x, y;
  Lisp_Object lx, ly;

DEFUN ("window-at", Fwindow_at, Swindow_at, 2, 3, 0,
       doc: /* Return window containing coordinates X and Y on FRAME.
If omitted, FRAME defaults to the currently selected frame.
The top left corner of the frame is considered to be row 0,
column 0.  */)
  (Lisp_Object x, Lisp_Object y, Lisp_Object frame)
{
  struct frame *f;

  if (NILP (frame))
    frame = selected_frame;

Note that, when WINDOW is the selected window and its buffer
is also currently selected, the value returned is the same as (point).
It would be more strictly correct to return the `top-level' value
of point, outside of any save-excursion forms.
But that is hard to define.  */)
  (Lisp_Object window)
{
  register struct window *w = decode_window (window);

  if (w == XWINDOW (selected_window)
      && current_buffer == XBUFFER (w->buffer))

DEFUN ("window-start", Fwindow_start, Swindow_start, 0, 1, 0,
       doc: /* Return position at which display currently starts in WINDOW.
WINDOW defaults to the selected window.
This is updated by redisplay or by calling `set-window-start'.  */)
  (Lisp_Object window)
{
  return Fmarker_position (decode_window (window)->start);
}

/* This is text temporarily removed from the doc string below.

does not update this value.
Return nil if there is no recorded value.  \(This can happen if the
last redisplay of WINDOW was preempted, and did not finish.)
If UPDATE is non-nil, compute the up-to-date position
if it isn't already recorded.  */)
  (Lisp_Object window, Lisp_Object update)
{
  Lisp_Object value;
  struct window *w = decode_window (window);
  Lisp_Object buf;
  struct buffer *b;

}

DEFUN ("set-window-point", Fset_window_point, Sset_window_point, 2, 2, 0,
       doc: /* Make point value in WINDOW be at position POS in WINDOW's buffer.
Return POS.  */)
  (Lisp_Object window, Lisp_Object pos)
{
  register struct window *w = decode_window (window);

  CHECK_NUMBER_COERCE_MARKER (pos);
  if (w == XWINDOW (selected_window)

DEFUN ("set-window-start", Fset_window_start, Sset_window_start, 2, 3, 0,
       doc: /* Make display in WINDOW start at position POS in WINDOW's buffer.
WINDOW defaults to the selected window.  Return POS.
Optional third arg NOFORCE non-nil inhibits next redisplay from
overriding motion of point in order to display at this exact start.  */)
  (Lisp_Object window, Lisp_Object pos, Lisp_Object noforce)
{
  register struct window *w = decode_window (window);

  CHECK_NUMBER_COERCE_MARKER (pos);
  set_marker_restricted (w->start, pos, w->buffer);

`kill-buffer' can delete a dedicated window and the containing frame.

Functions like `set-window-buffer' may change the buffer displayed by a
window, unless that window is "strongly" dedicated to its buffer, that
is the value returned by `window-dedicated-p' is t.  */)
  (Lisp_Object window)
{
  return decode_window (window)->dedicated;
}

DEFUN ("set-window-dedicated-p", Fset_window_dedicated_p,

As a special case, if FLAG is t, mark WINDOW as "strongly" dedicated to
its buffer.  Functions like `set-window-buffer' may change the buffer
displayed by a window, unless that window is strongly dedicated to its
buffer.  If and when `set-window-buffer' displays another buffer in a
window, it also makes sure that the window is not marked as dedicated.  */)
  (Lisp_Object window, Lisp_Object flag)
{
  register struct window *w = decode_window (window);

  w->dedicated = flag;
  return w->dedicated;

DEFUN ("window-parameters", Fwindow_parameters, Swindow_parameters,
       0, 1, 0,
       doc: /* Return the parameters of WINDOW and their values.
WINDOW defaults to the selected window.  The return value is a list of
elements of the form (PARAMETER . VALUE). */)
  (Lisp_Object window)
{
  return Fcopy_alist (decode_window (window)->window_parameters);
}

DEFUN ("window-parameter", Fwindow_parameter, Swindow_parameter,
       2, 2, 0,
       doc:  /* Return WINDOW's value for PARAMETER.
WINDOW defaults to the selected window.  */)
  (Lisp_Object window, Lisp_Object parameter)
{
  Lisp_Object result;

  result = Fassq (parameter, decode_window (window)->window_parameters);
  return CDR_SAFE (result);

DEFUN ("set-window-parameter", Fset_window_parameter,
       Sset_window_parameter, 3, 3, 0,
       doc: /* Set WINDOW's value of PARAMETER to VALUE.
WINDOW defaults to the selected window.  Return VALUE.  */)
  (Lisp_Object window, Lisp_Object parameter, Lisp_Object value)
{
  register struct window *w = decode_window (window);
  Lisp_Object old_alist_elt;

  old_alist_elt = Fassq (parameter, w->window_parameters);

DEFUN ("window-display-table", Fwindow_display_table, Swindow_display_table,
       0, 1, 0,
       doc: /* Return the display-table that WINDOW is using.
WINDOW defaults to the selected window.  */)
  (Lisp_Object window)
{
  return decode_window (window)->display_table;
}

/* Get the display table for use on window W.  This is either W's

  return dp;
}

DEFUN ("set-window-display-table", Fset_window_display_table, Sset_window_display_table, 2, 2, 0,
       doc: /* Set WINDOW's display-table to TABLE.  */)
  (register Lisp_Object window, Lisp_Object table)
{
  register struct window *w;

  w = decode_window (window);
  w->display_table = table;

DEFUN ("delete-window", Fdelete_window, Sdelete_window, 0, 1, "",
       doc: /* Remove WINDOW from its frame.
WINDOW defaults to the selected window.  Return nil.
Signal an error when WINDOW is the only window on its frame.  */)
  (register Lisp_Object window)
{
  struct frame *f;
  if (NILP (window))
    window = selected_window;
  else

If you use consistent values for MINIBUF and ALL-FRAMES, you can use
`next-window' to iterate through the entire cycle of acceptable
windows, eventually ending up back at the window you started with.
`previous-window' traverses the same cycle, in the reverse order.  */)
  (Lisp_Object window, Lisp_Object minibuf, Lisp_Object all_frames)
{
  return next_window (window, minibuf, all_frames, 1);
}

If you use consistent values for MINIBUF and ALL-FRAMES, you can
use `previous-window' to iterate through the entire cycle of
acceptable windows, eventually ending up back at the window you
started with.  `next-window' traverses the same cycle, in the
reverse order.  */)
  (Lisp_Object window, Lisp_Object minibuf, Lisp_Object all_frames)
{
  return next_window (window, minibuf, all_frames, 0);
}

This function uses `next-window' for finding the window to select.
The argument ALL-FRAMES has the same meaning as in `next-window',
but the MINIBUF argument of `next-window' is always effectively
nil.  */)
  (Lisp_Object count, Lisp_Object all_frames)
{
  Lisp_Object window;
  int i;

  CHECK_NUMBER (count);

WINDOW nil or omitted means use the selected window.
MINIBUF t means include the minibuffer window, even if it isn't active.
MINIBUF nil or omitted means include the minibuffer window only
if it's active.
MINIBUF neither nil nor t means never include the minibuffer window.  */)
  (Lisp_Object frame, Lisp_Object minibuf, Lisp_Object window)
{
  if (NILP (window))
    window = FRAMEP (frame) ? XFRAME (frame)->selected_window : selected_window;
  CHECK_WINDOW (window);
  if (NILP (frame))

If optional argument FRAME is `visible', search all visible frames.
If FRAME is 0, search all visible and iconified frames.
If FRAME is t, search all frames.
If FRAME is nil, search only the selected frame.
If FRAME is a frame, search only that frame.  */)
  (Lisp_Object frame, Lisp_Object dedicated)
{
  register Lisp_Object w;
  /* First try for a window that is full-width */
  w = window_loop (GET_LRU_WINDOW,
		   NILP (dedicated) ? make_number (1) : make_number (3),

If optional argument FRAME is `visible', search all visible frames.
If FRAME is 0, search all visible and iconified frames.
If FRAME is t, search all frames.
If FRAME is nil, search only the selected frame.
If FRAME is a frame, search only that frame.  */)
  (Lisp_Object frame, Lisp_Object dedicated)
{
  return window_loop (GET_LARGEST_WINDOW, dedicated, 0,
		      frame);
}

If optional argument FRAME is `visible', search all visible frames.
If optional argument FRAME is 0, search all visible and iconified frames.
If FRAME is t, search all frames.
If FRAME is nil, search only the selected frame.
If FRAME is a frame, search only that frame.  */)
  (Lisp_Object buffer_or_name, Lisp_Object frame)
{
  Lisp_Object buffer;

  if (NILP (buffer_or_name))
    buffer = Fcurrent_buffer ();

This function tries to reduce display jumps by keeping the text
previously visible in WINDOW in the same place on the frame.  Doing this
depends on the value of (window-start WINDOW), so if calling this
function in a program gives strange scrolling, make sure the
window-start value is reasonable when this function is called.  */)
  (Lisp_Object window)
{
  struct window *w;
  int startpos;
  int top, new_top;

If FRAME is nil, search all frames.
If FRAME is t, search only the selected frame.
If FRAME is a frame, search only that frame.
When a window showing BUFFER-OR-NAME is dedicated and the only window of
its frame, that frame is deleted when there are other frames left.  */)
  (Lisp_Object buffer_or_name, Lisp_Object frame)
{
  Lisp_Object buffer;

  /* FRAME uses t and nil to mean the opposite of what window_loop
     expects.  */

When a window showing BUFFER-OR-NAME is dedicated that window is
deleted.  If that window is the only window on its frame, that frame is
deleted too when there are other frames left.  If there are no other
frames left, some other buffer is displayed in that window.  */)
  (Lisp_Object buffer_or_name)
{
  Lisp_Object buffer;

  if (NILP (buffer_or_name))
    buffer = Fcurrent_buffer ();

buffer (that is `window-dedicated-p' returns t for WINDOW) and does not
already display BUFFER-OR-NAME.

This function runs `window-scroll-functions' before running
`window-configuration-change-hook'.  */)
  (register Lisp_Object window, Lisp_Object buffer_or_name, Lisp_Object keep_margins)
{
  register Lisp_Object tem, buffer;
  register struct window *w = decode_window (window);

  XSETWINDOW (window, w);

at the front of the list of recently selected ones and do not
make this window the most recently selected one.

Note that the main editor command loop selects the buffer of the
selected window before each command.  */)
  (register Lisp_Object window, Lisp_Object norecord)
{
  register struct window *w;
  register struct window *ow;
  struct frame *sf;

       0, 1, 0,
       doc: /* Force all windows to be updated on next redisplay.
If optional arg OBJECT is a window, force redisplay of that window only.
If OBJECT is a buffer or buffer name, force redisplay of all windows
displaying that buffer.  */)
  (Lisp_Object object)
{
  if (NILP (object))
    {
      windows_or_buffers_changed++;
      update_mode_lines++;

Returns the newly created window (which is the lower or rightmost one).
The upper or leftmost window is the original one, and remains selected
if it was selected before.

See Info node `(elisp)Splitting Windows' for more details and examples.  */)
  (Lisp_Object window, Lisp_Object size, Lisp_Object horizontal)
{
  register Lisp_Object new;
  register struct window *o, *p;
  FRAME_PTR fo;
  register int size_int;

window wider by SIZE columns.  If SIZE is negative, shrink the window by
-SIZE lines or columns.  Return nil.

This function can delete windows if they get too small.  The size of
fixed size windows is not altered by this function.  */)
  (Lisp_Object size, Lisp_Object horizontal)
{
  CHECK_NUMBER (size);
  enlarge_window (selected_window, XINT (size), !NILP (horizontal));

  run_window_configuration_change_hook (SELECTED_FRAME ());

window narrower by SIZE columns.  If SIZE is negative, enlarge selected
window by -SIZE lines or columns.  Return nil.

This function can delete windows if they get too small.  The size of
fixed size windows is not altered by this function. */)
  (Lisp_Object size, Lisp_Object horizontal)
{
  CHECK_NUMBER (size);
  enlarge_window (selected_window, -XINT (size), !NILP (horizontal));

  run_window_configuration_change_hook (SELECTED_FRAME ());

Otherwise, adjust the height, moving the bottom edge.

Following siblings of the selected window are resized to fulfill
the size request.  If they become too small in the process, they
are not deleted; instead, we signal an error.  */)
  (Lisp_Object window, Lisp_Object delta, Lisp_Object horizontal)
{
  CHECK_NUMBER (delta);
  if (NILP (window))
    window = selected_window;
  adjust_window_trailing_edge (window, XINT (delta), !NILP (horizontal));

If ARG is omitted or nil, scroll upward by a near full screen.
A near full screen is `next-screen-context-lines' less than a full screen.
Negative ARG means scroll downward.
If ARG is the atom `-', scroll downward by nearly full screen.
When calling from a program, supply as argument a number, nil, or `-'.  */)
  (Lisp_Object arg)
{
  scroll_command (arg, 1);
  return Qnil;
}

If ARG is omitted or nil, scroll down by a near full screen.
A near full screen is `next-screen-context-lines' less than a full screen.
Negative ARG means scroll upward.
If ARG is the atom `-', scroll upward by nearly full screen.
When calling from a program, supply as argument a number, nil, or `-'.  */)
  (Lisp_Object arg)
{
  scroll_command (arg, -1);
  return Qnil;
}


If `other-window-scroll-buffer' is non-nil, a window
showing that buffer is used.
If in the minibuffer, `minibuffer-scroll-window' if non-nil
specifies the window.  This takes precedence over
`other-window-scroll-buffer'.  */)
  (void)
{
  Lisp_Object window;

  if (MINI_WINDOW_P (XWINDOW (selected_window))
      && !NILP (Vminibuf_scroll_window))

If `other-window-scroll-buffer' is non-nil, scroll the window
showing that buffer, popping the buffer up if necessary.
If in the minibuffer, `minibuffer-scroll-window' if non-nil
specifies the window to scroll.  This takes precedence over
`other-window-scroll-buffer'.  */)
  (Lisp_Object arg)
{
  Lisp_Object window;
  struct window *w;
  int count = SPECPDL_INDEX ();

effect after the change.
If SET-MINIMUM is non-nil, the new scroll amount becomes the
lower bound for automatic scrolling, i.e. automatic scrolling
will not scroll a window to a column less than the value returned
by this function.  This happens in an interactive call.  */)
  (register Lisp_Object arg, Lisp_Object set_minimum)
{
  Lisp_Object result;
  int hscroll;
  struct window *w = XWINDOW (selected_window);

effect after the change.
If SET-MINIMUM is non-nil, the new scroll amount becomes the
lower bound for automatic scrolling, i.e. automatic scrolling
will not scroll a window to a column less than the value returned
by this function.  This happens in an interactive call.  */)
  (register Lisp_Object arg, Lisp_Object set_minimum)
{
  Lisp_Object result;
  int hscroll;
  struct window *w = XWINDOW (selected_window);

}

DEFUN ("minibuffer-selected-window", Fminibuffer_selected_window, Sminibuffer_selected_window, 0, 0, 0,
       doc: /* Return the window which was selected when entering the minibuffer.
Returns nil, if selected window is not a minibuffer window.  */)
  (void)
{
  if (minibuf_level > 0
      && MINI_WINDOW_P (XWINDOW (selected_window))
      && WINDOW_LIVE_P (minibuf_selected_window))
    return minibuf_selected_window;

height needed); if `recenter-redisplay' has the special value `tty',
then only tty frame are redrawn.

Just C-u as prefix means put point in the center of the window
and redisplay normally--don't erase and redraw the frame.  */)
  (register Lisp_Object arg)
{
  struct window *w = XWINDOW (selected_window);
  struct buffer *buf = XBUFFER (w->buffer);
  struct buffer *obuf = current_buffer;
  int center_p = 0;

       doc: /* Return the height in lines of the text display area of WINDOW.
WINDOW defaults to the selected window.

The return value does not include the mode line, any header line, nor
any partial-height lines in the text display area.  */)
  (Lisp_Object window)
{
  struct window *w = decode_window (window);
  int pixel_height = window_box_height (w);
  int line_height = pixel_height / FRAME_LINE_HEIGHT (XFRAME (w->frame));
  return make_number (line_height);

       1, 1, "P",
       doc: /* Position point relative to window.
With no argument, position point at center of window.
An argument specifies vertical position within the window;
zero means top of window, negative means relative to bottom of window.  */)
  (Lisp_Object arg)
{
  struct window *w = XWINDOW (selected_window);
  int lines, start;
  Lisp_Object window;
#if 0

#define SAVED_WINDOW_N(swv,n) \
  ((struct saved_window *) (XVECTOR ((swv)->contents[(n)])))

DEFUN ("window-configuration-p", Fwindow_configuration_p, Swindow_configuration_p, 1, 1, 0,
       doc: /* Return t if OBJECT is a window-configuration object.  */)
  (Lisp_Object object)
{
  return WINDOW_CONFIGURATIONP (object) ? Qt : Qnil;
}

DEFUN ("window-configuration-frame", Fwindow_configuration_frame, Swindow_configuration_frame, 1, 1, 0,
       doc: /* Return the frame that CONFIG, a window-configuration object, is about.  */)
  (Lisp_Object config)
{
  register struct save_window_data *data;
  struct Lisp_Vector *saved_windows;

  CHECK_WINDOW_CONFIGURATION (config);

CONFIGURATION must be a value previously returned
by `current-window-configuration' (which see).
If CONFIGURATION was made from a frame that is now deleted,
only frame-independent values can be restored.  In this case,
the return value is nil.  Otherwise the value is t.  */)
  (Lisp_Object configuration)
{
  register struct save_window_data *data;
  struct Lisp_Vector *saved_windows;
  Lisp_Object new_current_buffer;
  Lisp_Object frame;

and for each displayed buffer, where display starts, and the positions of
point and mark.  An exception is made for point in the current buffer:
its value is -not- saved.
This also records the currently selected frame, and FRAME's focus
redirection (see `redirect-frame-focus').  */)
  (Lisp_Object frame)
{
  register Lisp_Object tem;
  register int n_windows;
  register struct save_window_data *data;
  register int i;

and the value of point and mark for each window.
Also restore the choice of selected window.
Also restore which buffer is current.
Does not restore the value of point in current buffer.
usage: (save-window-excursion BODY...)  */)
  (Lisp_Object args)
{
  register Lisp_Object val;
  register int count = SPECPDL_INDEX ();

  record_unwind_protect (Fset_window_configuration,

again be a window or a list representing a window split, and so on.
EDGES is a list \(LEFT TOP RIGHT BOTTOM) as returned by `window-edges'.

If FRAME is nil or omitted, return information on the currently
selected frame.  */)
  (Lisp_Object frame)
{
  FRAME_PTR f;

  if (NILP (frame))
    frame = selected_frame;

If WINDOW is nil, set margins of the currently selected window.
Second arg LEFT-WIDTH specifies the number of character cells to
reserve for the left marginal area.  Optional third arg RIGHT-WIDTH
does the same for the right marginal area.  A nil width parameter
means no margin.  */)
  (Lisp_Object window, Lisp_Object left_width, Lisp_Object right_width)
{
  struct window *w = decode_window (window);

  /* Translate negative or zero widths to nil.
     Margins that are too wide have to be checked elsewhere.  */

       doc: /* Get width of marginal areas of window WINDOW.
If WINDOW is omitted or nil, use the currently selected window.
Value is a cons of the form (LEFT-WIDTH . RIGHT-WIDTH).
If a marginal area does not exist, its width will be returned
as nil.  */)
  (Lisp_Object window)
{
  struct window *w = decode_window (window);
  return Fcons (w->left_margin_cols, w->right_margin_cols);
}

frame's default fringe width.  Default fringe widths can be set with
the command `set-fringe-style'.
If optional fourth arg OUTSIDE-MARGINS is non-nil, draw the fringes
outside of the display margins.  By default, fringes are drawn between
display marginal areas and the text area.  */)
  (Lisp_Object window, Lisp_Object left_width, Lisp_Object right_width, Lisp_Object outside_margins)
{
  struct window *w = decode_window (window);

  if (!NILP (left_width))
    CHECK_NATNUM (left_width);

DEFUN ("window-fringes", Fwindow_fringes, Swindow_fringes,
       0, 1, 0,
       doc: /* Get width of fringes of window WINDOW.
If WINDOW is omitted or nil, use the currently selected window.
Value is a list of the form (LEFT-WIDTH RIGHT-WIDTH OUTSIDE-MARGINS).  */)
  (Lisp_Object window)
{
  struct window *w = decode_window (window);

  return Fcons (make_number (WINDOW_LEFT_FRINGE_WIDTH (w)),
		Fcons (make_number (WINDOW_RIGHT_FRINGE_WIDTH (w)),

Third parameter VERTICAL-TYPE specifies the type of the vertical scroll
bar: left, right, or nil.
If WIDTH is nil, use the frame's scroll-bar width.
If VERTICAL-TYPE is t, use the frame's scroll-bar type.
Fourth parameter HORIZONTAL-TYPE is currently unused.  */)
  (Lisp_Object window, Lisp_Object width, Lisp_Object vertical_type, Lisp_Object horizontal_type)
{
  struct window *w = decode_window (window);

  if (!NILP (width))
    {

       doc: /* Get width and type of scroll bars of window WINDOW.
If WINDOW is omitted or nil, use the currently selected window.
Value is a list of the form (WIDTH COLS VERTICAL-TYPE HORIZONTAL-TYPE).
If WIDTH is nil or TYPE is t, the window is using the frame's corresponding
value.  */)
  (Lisp_Object window)
{
  struct window *w = decode_window (window);
  return Fcons (make_number ((WINDOW_CONFIG_SCROLL_BAR_WIDTH (w)
			      ? WINDOW_CONFIG_SCROLL_BAR_WIDTH (w)
			      : WINDOW_SCROLL_BAR_AREA_WIDTH (w))),

DEFUN ("window-vscroll", Fwindow_vscroll, Swindow_vscroll, 0, 2, 0,
       doc: /* Return the amount by which WINDOW is scrolled vertically.
Use the selected window if WINDOW is nil or omitted.
Normally, value is a multiple of the canonical character height of WINDOW;
optional second arg PIXELS-P means value is measured in pixels.  */)
  (Lisp_Object window, Lisp_Object pixels_p)
{
  Lisp_Object result;
  struct frame *f;
  struct window *w;

optional third arg PIXELS-P non-nil means that VSCROLL is in pixels.
If PIXELS-P is nil, VSCROLL may have to be rounded so that it
corresponds to an integral number of pixels.  The return value is the
result of this rounding.
If PIXELS-P is non-nil, the return value is VSCROLL.  */)
  (Lisp_Object window, Lisp_Object vscroll, Lisp_Object pixels_p)
{
  struct window *w;
  struct frame *f;

  if (NILP (window))

DEFUN ("compare-window-configurations", Fcompare_window_configurations,
       Scompare_window_configurations, 2, 2, 0,
       doc: /* Compare two window configurations as regards the structure of windows.
This function ignores details such as the values of point and mark
and scrolling positions.  */)
  (Lisp_Object x, Lisp_Object y)
{
  if (compare_window_configurations (x, y, 1))
    return Qt;
  return Qnil;
}