comparison lisp/replace.el @ 87211:c2b1300a87e5

(keep-lines, flush-lines, how-many): Doc fix. Check search-upper-case before calling isearch-no-upper-case-p to set case-fold-search. (occur): Doc fix. (occur-1, perform-replace): Check search-upper-case before calling isearch-no-upper-case-p to set case-fold-search.

87210:a6f95b3d0102

  "Delete all lines except those containing matches for REGEXP.
A match split across lines preserves all the lines it lies in.
When called from Lisp (and usually interactively as well, see below)
applies to all lines starting after point.

If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive.

Second and third arg RSTART and REND specify the region to operate on.
This command operates on (the accessible part of) all lines whose
accessible part is entirely contained in the region determined by RSTART
and REND.  (A newline ending a line counts as part of that line.)

	    rend (point-max-marker)))
    (goto-char rstart))
  (save-excursion
    (or (bolp) (forward-line 1))
    (let ((start (point))
	  (case-fold-search  (and case-fold-search
				  (isearch-no-upper-case-p regexp t))))
      (while (< (point) rend)
	;; Start is first char not preserved by previous match.
	(if (not (re-search-forward regexp rend 'move))
	    (delete-region start rend)
	  (let ((end (save-excursion (goto-char (match-beginning 0))

When called from Lisp (and usually when called interactively as
well, see below), applies to the part of the buffer after point.
The line point is in is deleted if and only if it contains a
match for regexp starting after point.

If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive.

Second and third arg RSTART and REND specify the region to operate on.
Lines partially contained in this region are deleted if and only if
they contain a match entirely contained in it.

	(setq rstart (region-beginning)
	      rend (copy-marker (region-end)))
      (setq rstart (point)
	    rend (point-max-marker)))
    (goto-char rstart))
  (let ((case-fold-search (and case-fold-search
			       (isearch-no-upper-case-p regexp t))))
    (save-excursion
      (while (and (< (point) rend)
		  (re-search-forward regexp rend t))
	(delete-region (save-excursion (goto-char (match-beginning 0))
				       (forward-line 0)

  "Print and return number of matches for REGEXP following point.
When called from Lisp and INTERACTIVE is omitted or nil, just return
the number, do not print it; if INTERACTIVE is t, the function behaves
in all respects has if it had been called interactively.

If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive.

Second and third arg RSTART and REND specify the region to operate on.

Interactively, in Transient Mark mode when the mark is active, operate
on the contents of the region.  Otherwise, operate from point to the

	(setq rstart (point)
	      rend (point-max)))
      (goto-char rstart))
    (let ((count 0)
	  opoint
	  (case-fold-search (and case-fold-search
				 (isearch-no-upper-case-p regexp t))))
      (while (and (< (point) rend)
		  (progn (setq opoint (point))
			 (re-search-forward regexp rend t)))
	(if (= opoint (point))
	    (forward-char 1)

The lines are shown in a buffer named `*Occur*'.
It serves as a menu to find any of the occurrences in this buffer.
\\<occur-mode-map>\\[describe-mode] in that buffer will explain how.

If REGEXP contains upper case characters (excluding those preceded by `\\'),
the matching is case-sensitive."
  (interactive (occur-read-primary-args))
  (occur-1 regexp nlines (list (current-buffer))))

(defun multi-occur (bufs regexp &optional nlines)
  "Show all lines in buffers BUFS containing a match for REGEXP.

	    (buffer-undo-list t))
	(erase-buffer)
	(let ((count (occur-engine
		      regexp active-bufs occur-buf
		      (or nlines list-matching-lines-default-context-lines)
		      (and case-fold-search
			   (isearch-no-upper-case-p regexp t))
		      list-matching-lines-buffer-name-face
		      nil list-matching-lines-face
		      (not (eq occur-excluded-properties t)))))
	  (let* ((bufcount (length active-bufs))
		 (diff (- (length bufs) bufcount)))

make, or the user didn't cancel the call."
  (or map (setq map query-replace-map))
  (and query-flag minibuffer-auto-raise
       (raise-frame (window-frame (minibuffer-window))))
  (let* ((case-fold-search
          (and case-fold-search
               (isearch-no-upper-case-p from-string regexp-flag)))
         (nocasify (not (and case-replace case-fold-search)))
         (literal (or (not regexp-flag) (eq regexp-flag 'literal)))
         (search-function (if regexp-flag 're-search-forward 'search-forward))
         (search-string from-string)
         (real-match-data nil)       ; The match data for the current match.

87211:c2b1300a87e5

  "Delete all lines except those containing matches for REGEXP.
A match split across lines preserves all the lines it lies in.
When called from Lisp (and usually interactively as well, see below)
applies to all lines starting after point.

If REGEXP contains upper case characters (excluding those preceded by `\\')
and `search-upper-case' is non-nil, the matching is case-sensitive.

Second and third arg RSTART and REND specify the region to operate on.
This command operates on (the accessible part of) all lines whose
accessible part is entirely contained in the region determined by RSTART
and REND.  (A newline ending a line counts as part of that line.)

	    rend (point-max-marker)))
    (goto-char rstart))
  (save-excursion
    (or (bolp) (forward-line 1))
    (let ((start (point))
	  (case-fold-search
	   (if (and case-fold-search search-upper-case)
	       (isearch-no-upper-case-p regexp t)
	     case-fold-search)))
      (while (< (point) rend)
	;; Start is first char not preserved by previous match.
	(if (not (re-search-forward regexp rend 'move))
	    (delete-region start rend)
	  (let ((end (save-excursion (goto-char (match-beginning 0))

When called from Lisp (and usually when called interactively as
well, see below), applies to the part of the buffer after point.
The line point is in is deleted if and only if it contains a
match for regexp starting after point.

If REGEXP contains upper case characters (excluding those preceded by `\\')
and `search-upper-case' is non-nil, the matching is case-sensitive.

Second and third arg RSTART and REND specify the region to operate on.
Lines partially contained in this region are deleted if and only if
they contain a match entirely contained in it.

	(setq rstart (region-beginning)
	      rend (copy-marker (region-end)))
      (setq rstart (point)
	    rend (point-max-marker)))
    (goto-char rstart))
  (let ((case-fold-search
	 (if (and case-fold-search search-upper-case)
	     (isearch-no-upper-case-p regexp t)
	   case-fold-search)))
    (save-excursion
      (while (and (< (point) rend)
		  (re-search-forward regexp rend t))
	(delete-region (save-excursion (goto-char (match-beginning 0))
				       (forward-line 0)

  "Print and return number of matches for REGEXP following point.
When called from Lisp and INTERACTIVE is omitted or nil, just return
the number, do not print it; if INTERACTIVE is t, the function behaves
in all respects has if it had been called interactively.

If REGEXP contains upper case characters (excluding those preceded by `\\')
and `search-upper-case' is non-nil, the matching is case-sensitive.

Second and third arg RSTART and REND specify the region to operate on.

Interactively, in Transient Mark mode when the mark is active, operate
on the contents of the region.  Otherwise, operate from point to the

	(setq rstart (point)
	      rend (point-max)))
      (goto-char rstart))
    (let ((count 0)
	  opoint
	  (case-fold-search
	   (if (and case-fold-search search-upper-case)
	       (isearch-no-upper-case-p regexp t)
	     case-fold-search)))
      (while (and (< (point) rend)
		  (progn (setq opoint (point))
			 (re-search-forward regexp rend t)))
	(if (= opoint (point))
	    (forward-char 1)

The lines are shown in a buffer named `*Occur*'.
It serves as a menu to find any of the occurrences in this buffer.
\\<occur-mode-map>\\[describe-mode] in that buffer will explain how.

If REGEXP contains upper case characters (excluding those preceded by `\\')
and `search-upper-case' is non-nil, the matching is case-sensitive."
  (interactive (occur-read-primary-args))
  (occur-1 regexp nlines (list (current-buffer))))

(defun multi-occur (bufs regexp &optional nlines)
  "Show all lines in buffers BUFS containing a match for REGEXP.

	    (buffer-undo-list t))
	(erase-buffer)
	(let ((count (occur-engine
		      regexp active-bufs occur-buf
		      (or nlines list-matching-lines-default-context-lines)
		      (if (and case-fold-search search-upper-case)
			  (isearch-no-upper-case-p regexp t)
			case-fold-search)
		      list-matching-lines-buffer-name-face
		      nil list-matching-lines-face
		      (not (eq occur-excluded-properties t)))))
	  (let* ((bufcount (length active-bufs))
		 (diff (- (length bufs) bufcount)))

make, or the user didn't cancel the call."
  (or map (setq map query-replace-map))
  (and query-flag minibuffer-auto-raise
       (raise-frame (window-frame (minibuffer-window))))
  (let* ((case-fold-search
	  (if (and case-fold-search search-upper-case)
	      (isearch-no-upper-case-p from-string regexp-flag)
	    case-fold-search))
         (nocasify (not (and case-replace case-fold-search)))
         (literal (or (not regexp-flag) (eq regexp-flag 'literal)))
         (search-function (if regexp-flag 're-search-forward 'search-forward))
         (search-string from-string)
         (real-match-data nil)       ; The match data for the current match.