diff src/ffmpeg/libavcodec/ppc/mpegvideo_altivec.c @ 808:e8776388b02a trunk

[svn] - add ffmpeg

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/ffmpeg/libavcodec/ppc/mpegvideo_altivec.c	Mon Mar 12 11:18:54 2007 -0700
@@ -0,0 +1,603 @@
+/*
+ * Copyright (c) 2002 Dieter Shirley
+ *
+ * dct_unquantize_h263_altivec:
+ * Copyright (c) 2003 Romain Dolbeau <[e-mail]>
+ *
+ * This file is part of FFmpeg.
+ *
+ * FFmpeg is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * FFmpeg is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with FFmpeg; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "../dsputil.h"
+#include "../mpegvideo.h"
+
+#include "gcc_fixes.h"
+
+#include "dsputil_altivec.h"
+
+// Swaps two variables (used for altivec registers)
+#define SWAP(a,b) \
+do { \
+    __typeof__(a) swap_temp=a; \
+    a=b; \
+    b=swap_temp; \
+} while (0)
+
+// transposes a matrix consisting of four vectors with four elements each
+#define TRANSPOSE4(a,b,c,d) \
+do { \
+  __typeof__(a) _trans_ach = vec_mergeh(a, c); \
+  __typeof__(a) _trans_acl = vec_mergel(a, c); \
+  __typeof__(a) _trans_bdh = vec_mergeh(b, d); \
+  __typeof__(a) _trans_bdl = vec_mergel(b, d); \
+ \
+  a = vec_mergeh(_trans_ach, _trans_bdh); \
+  b = vec_mergel(_trans_ach, _trans_bdh); \
+  c = vec_mergeh(_trans_acl, _trans_bdl); \
+  d = vec_mergel(_trans_acl, _trans_bdl); \
+} while (0)
+
+
+// Loads a four-byte value (int or float) from the target address
+// into every element in the target vector.  Only works if the
+// target address is four-byte aligned (which should be always).
+#define LOAD4(vec, address) \
+{ \
+    __typeof__(vec)* _load_addr = (__typeof__(vec)*)(address); \
+    vector unsigned char _perm_vec = vec_lvsl(0,(address)); \
+    vec = vec_ld(0, _load_addr); \
+    vec = vec_perm(vec, vec, _perm_vec); \
+    vec = vec_splat(vec, 0); \
+}
+
+
+#ifdef CONFIG_DARWIN
+#define FOUROF(a) (a)
+#else
+// slower, for dumb non-apple GCC
+#define FOUROF(a) {a,a,a,a}
+#endif
+int dct_quantize_altivec(MpegEncContext* s,
+                        DCTELEM* data, int n,
+                        int qscale, int* overflow)
+{
+    int lastNonZero;
+    vector float row0, row1, row2, row3, row4, row5, row6, row7;
+    vector float alt0, alt1, alt2, alt3, alt4, alt5, alt6, alt7;
+    const_vector float zero = (const_vector float)FOUROF(0.);
+    // used after quantise step
+    int oldBaseValue = 0;
+
+    // Load the data into the row/alt vectors
+    {
+        vector signed short data0, data1, data2, data3, data4, data5, data6, data7;
+
+        data0 = vec_ld(0, data);
+        data1 = vec_ld(16, data);
+        data2 = vec_ld(32, data);
+        data3 = vec_ld(48, data);
+        data4 = vec_ld(64, data);
+        data5 = vec_ld(80, data);
+        data6 = vec_ld(96, data);
+        data7 = vec_ld(112, data);
+
+        // Transpose the data before we start
+        TRANSPOSE8(data0, data1, data2, data3, data4, data5, data6, data7);
+
+        // load the data into floating point vectors.  We load
+        // the high half of each row into the main row vectors
+        // and the low half into the alt vectors.
+        row0 = vec_ctf(vec_unpackh(data0), 0);
+        alt0 = vec_ctf(vec_unpackl(data0), 0);
+        row1 = vec_ctf(vec_unpackh(data1), 0);
+        alt1 = vec_ctf(vec_unpackl(data1), 0);
+        row2 = vec_ctf(vec_unpackh(data2), 0);
+        alt2 = vec_ctf(vec_unpackl(data2), 0);
+        row3 = vec_ctf(vec_unpackh(data3), 0);
+        alt3 = vec_ctf(vec_unpackl(data3), 0);
+        row4 = vec_ctf(vec_unpackh(data4), 0);
+        alt4 = vec_ctf(vec_unpackl(data4), 0);
+        row5 = vec_ctf(vec_unpackh(data5), 0);
+        alt5 = vec_ctf(vec_unpackl(data5), 0);
+        row6 = vec_ctf(vec_unpackh(data6), 0);
+        alt6 = vec_ctf(vec_unpackl(data6), 0);
+        row7 = vec_ctf(vec_unpackh(data7), 0);
+        alt7 = vec_ctf(vec_unpackl(data7), 0);
+    }
+
+    // The following block could exist as a separate an altivec dct
+                // function.  However, if we put it inline, the DCT data can remain
+                // in the vector local variables, as floats, which we'll use during the
+                // quantize step...
+    {
+        const vector float vec_0_298631336 = (vector float)FOUROF(0.298631336f);
+        const vector float vec_0_390180644 = (vector float)FOUROF(-0.390180644f);
+        const vector float vec_0_541196100 = (vector float)FOUROF(0.541196100f);
+        const vector float vec_0_765366865 = (vector float)FOUROF(0.765366865f);
+        const vector float vec_0_899976223 = (vector float)FOUROF(-0.899976223f);
+        const vector float vec_1_175875602 = (vector float)FOUROF(1.175875602f);
+        const vector float vec_1_501321110 = (vector float)FOUROF(1.501321110f);
+        const vector float vec_1_847759065 = (vector float)FOUROF(-1.847759065f);
+        const vector float vec_1_961570560 = (vector float)FOUROF(-1.961570560f);
+        const vector float vec_2_053119869 = (vector float)FOUROF(2.053119869f);
+        const vector float vec_2_562915447 = (vector float)FOUROF(-2.562915447f);
+        const vector float vec_3_072711026 = (vector float)FOUROF(3.072711026f);
+
+
+        int whichPass, whichHalf;
+
+        for(whichPass = 1; whichPass<=2; whichPass++)
+        {
+            for(whichHalf = 1; whichHalf<=2; whichHalf++)
+            {
+                vector float tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+                vector float tmp10, tmp11, tmp12, tmp13;
+                vector float z1, z2, z3, z4, z5;
+
+                tmp0 = vec_add(row0, row7); // tmp0 = dataptr[0] + dataptr[7];
+                tmp7 = vec_sub(row0, row7); // tmp7 = dataptr[0] - dataptr[7];
+                tmp3 = vec_add(row3, row4); // tmp3 = dataptr[3] + dataptr[4];
+                tmp4 = vec_sub(row3, row4); // tmp4 = dataptr[3] - dataptr[4];
+                tmp1 = vec_add(row1, row6); // tmp1 = dataptr[1] + dataptr[6];
+                tmp6 = vec_sub(row1, row6); // tmp6 = dataptr[1] - dataptr[6];
+                tmp2 = vec_add(row2, row5); // tmp2 = dataptr[2] + dataptr[5];
+                tmp5 = vec_sub(row2, row5); // tmp5 = dataptr[2] - dataptr[5];
+
+                tmp10 = vec_add(tmp0, tmp3); // tmp10 = tmp0 + tmp3;
+                tmp13 = vec_sub(tmp0, tmp3); // tmp13 = tmp0 - tmp3;
+                tmp11 = vec_add(tmp1, tmp2); // tmp11 = tmp1 + tmp2;
+                tmp12 = vec_sub(tmp1, tmp2); // tmp12 = tmp1 - tmp2;
+
+
+                // dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS);
+                row0 = vec_add(tmp10, tmp11);
+
+                // dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS);
+                row4 = vec_sub(tmp10, tmp11);
+
+
+                // z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+                z1 = vec_madd(vec_add(tmp12, tmp13), vec_0_541196100, (vector float)zero);
+
+                // dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
+                //                                CONST_BITS-PASS1_BITS);
+                row2 = vec_madd(tmp13, vec_0_765366865, z1);
+
+                // dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
+                //                                CONST_BITS-PASS1_BITS);
+                row6 = vec_madd(tmp12, vec_1_847759065, z1);
+
+                z1 = vec_add(tmp4, tmp7); // z1 = tmp4 + tmp7;
+                z2 = vec_add(tmp5, tmp6); // z2 = tmp5 + tmp6;
+                z3 = vec_add(tmp4, tmp6); // z3 = tmp4 + tmp6;
+                z4 = vec_add(tmp5, tmp7); // z4 = tmp5 + tmp7;
+
+                // z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
+                z5 = vec_madd(vec_add(z3, z4), vec_1_175875602, (vector float)zero);
+
+                // z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+                z3 = vec_madd(z3, vec_1_961570560, z5);
+
+                // z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+                z4 = vec_madd(z4, vec_0_390180644, z5);
+
+                // The following adds are rolled into the multiplies above
+                // z3 = vec_add(z3, z5);  // z3 += z5;
+                // z4 = vec_add(z4, z5);  // z4 += z5;
+
+                // z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+                // Wow!  It's actually more effecient to roll this multiply
+                // into the adds below, even thought the multiply gets done twice!
+                // z2 = vec_madd(z2, vec_2_562915447, (vector float)zero);
+
+                // z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+                // Same with this one...
+                // z1 = vec_madd(z1, vec_0_899976223, (vector float)zero);
+
+                // tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+                // dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS);
+                row7 = vec_madd(tmp4, vec_0_298631336, vec_madd(z1, vec_0_899976223, z3));
+
+                // tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+                // dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS);
+                row5 = vec_madd(tmp5, vec_2_053119869, vec_madd(z2, vec_2_562915447, z4));
+
+                // tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+                // dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS);
+                row3 = vec_madd(tmp6, vec_3_072711026, vec_madd(z2, vec_2_562915447, z3));
+
+                // tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+                // dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS);
+                row1 = vec_madd(z1, vec_0_899976223, vec_madd(tmp7, vec_1_501321110, z4));
+
+                // Swap the row values with the alts.  If this is the first half,
+                // this sets up the low values to be acted on in the second half.
+                // If this is the second half, it puts the high values back in
+                // the row values where they are expected to be when we're done.
+                SWAP(row0, alt0);
+                SWAP(row1, alt1);
+                SWAP(row2, alt2);
+                SWAP(row3, alt3);
+                SWAP(row4, alt4);
+                SWAP(row5, alt5);
+                SWAP(row6, alt6);
+                SWAP(row7, alt7);
+            }
+
+            if (whichPass == 1)
+            {
+                // transpose the data for the second pass
+
+                // First, block transpose the upper right with lower left.
+                SWAP(row4, alt0);
+                SWAP(row5, alt1);
+                SWAP(row6, alt2);
+                SWAP(row7, alt3);
+
+                // Now, transpose each block of four
+                TRANSPOSE4(row0, row1, row2, row3);
+                TRANSPOSE4(row4, row5, row6, row7);
+                TRANSPOSE4(alt0, alt1, alt2, alt3);
+                TRANSPOSE4(alt4, alt5, alt6, alt7);
+            }
+        }
+    }
+
+    // perform the quantise step, using the floating point data
+    // still in the row/alt registers
+    {
+        const int* biasAddr;
+        const vector signed int* qmat;
+        vector float bias, negBias;
+
+        if (s->mb_intra)
+        {
+            vector signed int baseVector;
+
+            // We must cache element 0 in the intra case
+            // (it needs special handling).
+            baseVector = vec_cts(vec_splat(row0, 0), 0);
+            vec_ste(baseVector, 0, &oldBaseValue);
+
+            qmat = (vector signed int*)s->q_intra_matrix[qscale];
+            biasAddr = &(s->intra_quant_bias);
+        }
+        else
+        {
+            qmat = (vector signed int*)s->q_inter_matrix[qscale];
+            biasAddr = &(s->inter_quant_bias);
+        }
+
+        // Load the bias vector (We add 0.5 to the bias so that we're
+                                // rounding when we convert to int, instead of flooring.)
+        {
+            vector signed int biasInt;
+            const vector float negOneFloat = (vector float)FOUROF(-1.0f);
+            LOAD4(biasInt, biasAddr);
+            bias = vec_ctf(biasInt, QUANT_BIAS_SHIFT);
+            negBias = vec_madd(bias, negOneFloat, zero);
+        }
+
+        {
+            vector float q0, q1, q2, q3, q4, q5, q6, q7;
+
+            q0 = vec_ctf(qmat[0], QMAT_SHIFT);
+            q1 = vec_ctf(qmat[2], QMAT_SHIFT);
+            q2 = vec_ctf(qmat[4], QMAT_SHIFT);
+            q3 = vec_ctf(qmat[6], QMAT_SHIFT);
+            q4 = vec_ctf(qmat[8], QMAT_SHIFT);
+            q5 = vec_ctf(qmat[10], QMAT_SHIFT);
+            q6 = vec_ctf(qmat[12], QMAT_SHIFT);
+            q7 = vec_ctf(qmat[14], QMAT_SHIFT);
+
+            row0 = vec_sel(vec_madd(row0, q0, negBias), vec_madd(row0, q0, bias),
+                    vec_cmpgt(row0, zero));
+            row1 = vec_sel(vec_madd(row1, q1, negBias), vec_madd(row1, q1, bias),
+                    vec_cmpgt(row1, zero));
+            row2 = vec_sel(vec_madd(row2, q2, negBias), vec_madd(row2, q2, bias),
+                    vec_cmpgt(row2, zero));
+            row3 = vec_sel(vec_madd(row3, q3, negBias), vec_madd(row3, q3, bias),
+                    vec_cmpgt(row3, zero));
+            row4 = vec_sel(vec_madd(row4, q4, negBias), vec_madd(row4, q4, bias),
+                    vec_cmpgt(row4, zero));
+            row5 = vec_sel(vec_madd(row5, q5, negBias), vec_madd(row5, q5, bias),
+                    vec_cmpgt(row5, zero));
+            row6 = vec_sel(vec_madd(row6, q6, negBias), vec_madd(row6, q6, bias),
+                    vec_cmpgt(row6, zero));
+            row7 = vec_sel(vec_madd(row7, q7, negBias), vec_madd(row7, q7, bias),
+                    vec_cmpgt(row7, zero));
+
+            q0 = vec_ctf(qmat[1], QMAT_SHIFT);
+            q1 = vec_ctf(qmat[3], QMAT_SHIFT);
+            q2 = vec_ctf(qmat[5], QMAT_SHIFT);
+            q3 = vec_ctf(qmat[7], QMAT_SHIFT);
+            q4 = vec_ctf(qmat[9], QMAT_SHIFT);
+            q5 = vec_ctf(qmat[11], QMAT_SHIFT);
+            q6 = vec_ctf(qmat[13], QMAT_SHIFT);
+            q7 = vec_ctf(qmat[15], QMAT_SHIFT);
+
+            alt0 = vec_sel(vec_madd(alt0, q0, negBias), vec_madd(alt0, q0, bias),
+                    vec_cmpgt(alt0, zero));
+            alt1 = vec_sel(vec_madd(alt1, q1, negBias), vec_madd(alt1, q1, bias),
+                    vec_cmpgt(alt1, zero));
+            alt2 = vec_sel(vec_madd(alt2, q2, negBias), vec_madd(alt2, q2, bias),
+                    vec_cmpgt(alt2, zero));
+            alt3 = vec_sel(vec_madd(alt3, q3, negBias), vec_madd(alt3, q3, bias),
+                    vec_cmpgt(alt3, zero));
+            alt4 = vec_sel(vec_madd(alt4, q4, negBias), vec_madd(alt4, q4, bias),
+                    vec_cmpgt(alt4, zero));
+            alt5 = vec_sel(vec_madd(alt5, q5, negBias), vec_madd(alt5, q5, bias),
+                    vec_cmpgt(alt5, zero));
+            alt6 = vec_sel(vec_madd(alt6, q6, negBias), vec_madd(alt6, q6, bias),
+                    vec_cmpgt(alt6, zero));
+            alt7 = vec_sel(vec_madd(alt7, q7, negBias), vec_madd(alt7, q7, bias),
+                    vec_cmpgt(alt7, zero));
+        }
+
+
+    }
+
+    // Store the data back into the original block
+    {
+        vector signed short data0, data1, data2, data3, data4, data5, data6, data7;
+
+        data0 = vec_pack(vec_cts(row0, 0), vec_cts(alt0, 0));
+        data1 = vec_pack(vec_cts(row1, 0), vec_cts(alt1, 0));
+        data2 = vec_pack(vec_cts(row2, 0), vec_cts(alt2, 0));
+        data3 = vec_pack(vec_cts(row3, 0), vec_cts(alt3, 0));
+        data4 = vec_pack(vec_cts(row4, 0), vec_cts(alt4, 0));
+        data5 = vec_pack(vec_cts(row5, 0), vec_cts(alt5, 0));
+        data6 = vec_pack(vec_cts(row6, 0), vec_cts(alt6, 0));
+        data7 = vec_pack(vec_cts(row7, 0), vec_cts(alt7, 0));
+
+        {
+            // Clamp for overflow
+            vector signed int max_q_int, min_q_int;
+            vector signed short max_q, min_q;
+
+            LOAD4(max_q_int, &(s->max_qcoeff));
+            LOAD4(min_q_int, &(s->min_qcoeff));
+
+            max_q = vec_pack(max_q_int, max_q_int);
+            min_q = vec_pack(min_q_int, min_q_int);
+
+            data0 = vec_max(vec_min(data0, max_q), min_q);
+            data1 = vec_max(vec_min(data1, max_q), min_q);
+            data2 = vec_max(vec_min(data2, max_q), min_q);
+            data4 = vec_max(vec_min(data4, max_q), min_q);
+            data5 = vec_max(vec_min(data5, max_q), min_q);
+            data6 = vec_max(vec_min(data6, max_q), min_q);
+            data7 = vec_max(vec_min(data7, max_q), min_q);
+        }
+
+        {
+        vector bool char zero_01, zero_23, zero_45, zero_67;
+        vector signed char scanIndices_01, scanIndices_23, scanIndices_45, scanIndices_67;
+        vector signed char negOne = vec_splat_s8(-1);
+        vector signed char* scanPtr =
+                (vector signed char*)(s->intra_scantable.inverse);
+        signed char lastNonZeroChar;
+
+        // Determine the largest non-zero index.
+        zero_01 = vec_pack(vec_cmpeq(data0, (vector signed short)zero),
+                vec_cmpeq(data1, (vector signed short)zero));
+        zero_23 = vec_pack(vec_cmpeq(data2, (vector signed short)zero),
+                vec_cmpeq(data3, (vector signed short)zero));
+        zero_45 = vec_pack(vec_cmpeq(data4, (vector signed short)zero),
+                vec_cmpeq(data5, (vector signed short)zero));
+        zero_67 = vec_pack(vec_cmpeq(data6, (vector signed short)zero),
+                vec_cmpeq(data7, (vector signed short)zero));
+
+        // 64 biggest values
+        scanIndices_01 = vec_sel(scanPtr[0], negOne, zero_01);
+        scanIndices_23 = vec_sel(scanPtr[1], negOne, zero_23);
+        scanIndices_45 = vec_sel(scanPtr[2], negOne, zero_45);
+        scanIndices_67 = vec_sel(scanPtr[3], negOne, zero_67);
+
+        // 32 largest values
+        scanIndices_01 = vec_max(scanIndices_01, scanIndices_23);
+        scanIndices_45 = vec_max(scanIndices_45, scanIndices_67);
+
+        // 16 largest values
+        scanIndices_01 = vec_max(scanIndices_01, scanIndices_45);
+
+        // 8 largest values
+        scanIndices_01 = vec_max(vec_mergeh(scanIndices_01, negOne),
+                vec_mergel(scanIndices_01, negOne));
+
+        // 4 largest values
+        scanIndices_01 = vec_max(vec_mergeh(scanIndices_01, negOne),
+                vec_mergel(scanIndices_01, negOne));
+
+        // 2 largest values
+        scanIndices_01 = vec_max(vec_mergeh(scanIndices_01, negOne),
+                vec_mergel(scanIndices_01, negOne));
+
+        // largest value
+        scanIndices_01 = vec_max(vec_mergeh(scanIndices_01, negOne),
+                vec_mergel(scanIndices_01, negOne));
+
+        scanIndices_01 = vec_splat(scanIndices_01, 0);
+
+
+        vec_ste(scanIndices_01, 0, &lastNonZeroChar);
+
+        lastNonZero = lastNonZeroChar;
+
+        // While the data is still in vectors we check for the transpose IDCT permute
+        // and handle it using the vector unit if we can.  This is the permute used
+        // by the altivec idct, so it is common when using the altivec dct.
+
+        if ((lastNonZero > 0) && (s->dsp.idct_permutation_type == FF_TRANSPOSE_IDCT_PERM))
+        {
+            TRANSPOSE8(data0, data1, data2, data3, data4, data5, data6, data7);
+        }
+
+        vec_st(data0, 0, data);
+        vec_st(data1, 16, data);
+        vec_st(data2, 32, data);
+        vec_st(data3, 48, data);
+        vec_st(data4, 64, data);
+        vec_st(data5, 80, data);
+        vec_st(data6, 96, data);
+        vec_st(data7, 112, data);
+        }
+    }
+
+    // special handling of block[0]
+    if (s->mb_intra)
+    {
+        if (!s->h263_aic)
+        {
+            if (n < 4)
+                oldBaseValue /= s->y_dc_scale;
+            else
+                oldBaseValue /= s->c_dc_scale;
+        }
+
+        // Divide by 8, rounding the result
+        data[0] = (oldBaseValue + 4) >> 3;
+    }
+
+    // We handled the tranpose permutation above and we don't
+    // need to permute the "no" permutation case.
+    if ((lastNonZero > 0) &&
+        (s->dsp.idct_permutation_type != FF_TRANSPOSE_IDCT_PERM) &&
+        (s->dsp.idct_permutation_type != FF_NO_IDCT_PERM))
+    {
+        ff_block_permute(data, s->dsp.idct_permutation,
+                s->intra_scantable.scantable, lastNonZero);
+    }
+
+    return lastNonZero;
+}
+#undef FOUROF
+
+/*
+  AltiVec version of dct_unquantize_h263
+  this code assumes `block' is 16 bytes-aligned
+*/
+void dct_unquantize_h263_altivec(MpegEncContext *s,
+                                 DCTELEM *block, int n, int qscale)
+{
+POWERPC_PERF_DECLARE(altivec_dct_unquantize_h263_num, 1);
+    int i, level, qmul, qadd;
+    int nCoeffs;
+
+    assert(s->block_last_index[n]>=0);
+
+POWERPC_PERF_START_COUNT(altivec_dct_unquantize_h263_num, 1);
+
+    qadd = (qscale - 1) | 1;
+    qmul = qscale << 1;
+
+    if (s->mb_intra) {
+        if (!s->h263_aic) {
+            if (n < 4)
+                block[0] = block[0] * s->y_dc_scale;
+            else
+                block[0] = block[0] * s->c_dc_scale;
+        }else
+            qadd = 0;
+        i = 1;
+        nCoeffs= 63; //does not allways use zigzag table
+    } else {
+        i = 0;
+        nCoeffs= s->intra_scantable.raster_end[ s->block_last_index[n] ];
+    }
+
+    {
+      register const_vector signed short vczero = (const_vector signed short)vec_splat_s16(0);
+      short __attribute__ ((aligned(16))) qmul8[] =
+          {
+            qmul, qmul, qmul, qmul,
+            qmul, qmul, qmul, qmul
+          };
+      short __attribute__ ((aligned(16))) qadd8[] =
+          {
+            qadd, qadd, qadd, qadd,
+            qadd, qadd, qadd, qadd
+          };
+      short __attribute__ ((aligned(16))) nqadd8[] =
+          {
+            -qadd, -qadd, -qadd, -qadd,
+            -qadd, -qadd, -qadd, -qadd
+          };
+      register vector signed short blockv, qmulv, qaddv, nqaddv, temp1;
+      register vector bool short blockv_null, blockv_neg;
+      register short backup_0 = block[0];
+      register int j = 0;
+
+      qmulv = vec_ld(0, qmul8);
+      qaddv = vec_ld(0, qadd8);
+      nqaddv = vec_ld(0, nqadd8);
+
+#if 0 // block *is* 16 bytes-aligned, it seems.
+      // first make sure block[j] is 16 bytes-aligned
+      for(j = 0; (j <= nCoeffs) && ((((unsigned long)block) + (j << 1)) & 0x0000000F) ; j++) {
+        level = block[j];
+        if (level) {
+          if (level < 0) {
+                level = level * qmul - qadd;
+            } else {
+                level = level * qmul + qadd;
+            }
+            block[j] = level;
+        }
+      }
+#endif
+
+      // vectorize all the 16 bytes-aligned blocks
+      // of 8 elements
+      for(; (j + 7) <= nCoeffs ; j+=8)
+      {
+        blockv = vec_ld(j << 1, block);
+        blockv_neg = vec_cmplt(blockv, vczero);
+        blockv_null = vec_cmpeq(blockv, vczero);
+        // choose between +qadd or -qadd as the third operand
+        temp1 = vec_sel(qaddv, nqaddv, blockv_neg);
+        // multiply & add (block{i,i+7} * qmul [+-] qadd)
+        temp1 = vec_mladd(blockv, qmulv, temp1);
+        // put 0 where block[{i,i+7} used to have 0
+        blockv = vec_sel(temp1, blockv, blockv_null);
+        vec_st(blockv, j << 1, block);
+      }
+
+      // if nCoeffs isn't a multiple of 8, finish the job
+      // using good old scalar units.
+      // (we could do it using a truncated vector,
+      // but I'm not sure it's worth the hassle)
+      for(; j <= nCoeffs ; j++) {
+        level = block[j];
+        if (level) {
+          if (level < 0) {
+                level = level * qmul - qadd;
+            } else {
+                level = level * qmul + qadd;
+            }
+            block[j] = level;
+        }
+      }
+
+      if (i == 1)
+      { // cheat. this avoid special-casing the first iteration
+        block[0] = backup_0;
+      }
+    }
+POWERPC_PERF_STOP_COUNT(altivec_dct_unquantize_h263_num, nCoeffs == 63);
+}